To use AT commands in HyperTerminal, follow these steps:
| 1. | Start HyperTerminal (Hypertrm.exe).
|
| 2. | Enter a name for the connection (for example, Test) in the Name
box.
|
| 3. | Click an icon for the connection in the Icon box, and then click OK.
|
| 4. | In the Connect Using box, click Direct To Com X (where X is the port
your modem is connected to) and then click OK.
|
| 5. | Verify the settings on the Port Settings tab and then click OK.
|
| 6. | On the File menu, click Properties. On the Settings tab, click
ASCII Setup.
|
| 7. | Click the Send Line Ends With Line Feeds and Echo Typed Characters
Locally check boxes to select them.
|
| 8. | Click OK, and then click OK. You can now type AT commands.
|
| 9. | Quit HyperTerminal. When you are prompted "Save session <name>?"
click Yes if you want to save the session so that you can use AT
commands at another time.
|
Back to the top
