Article ID: 192901 - Last Review: January 23, 2007 - Revision: 3.2 Fatal Exception When You Connect SideWinder Precision ProThis article was previously published under Q192901 SYMPTOMS
When you connect a second Universal Serial Bus (USB) device to the USB
port on your computer while the computer is running, you may receive an
error message on a blue screen similar to the following:
A fatal exception 0E has occurred at 0028:FF027A60 in VXD HIDCLASS(01)+00000F40. The current application will be terminated.
Fatal exception in Windows. You must restart your computer.
CAUSE
This behavior can occur if your computer or motherboard does not properly
support USB.
RESOLUTION
To resolve this issue, contact your computer or motherboard manufacturer to
inquire about the hardware configuration on your computer.
For information about how to contact your computer or motherboard manufacturer, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base: 65416
(http://support.microsoft.com/kb/65416/EN-US/
)
Hardware and Software Third-Party Vendor Contact List, A-K 60781 (http://support.microsoft.com/kb/60781/EN-US/ ) Hardware and Software Third-Party Vendor Contact List, L-P 60782 (http://support.microsoft.com/kb/60782/EN-US/ ) Hardware and Software Third-Party Vendor Contact List, Q-Z APPLIES TO
| Article Translations
|
| United States | Change | | | All Microsoft Sites |
Help and Support
Back to the top
|
