Slaan oor na hoofinhoud
Microsoft
Microsoft-ondersteuning
  • Windows
  • Surface
  • Xbox
      • Outlook
    • PCs & Devices
    • Entertainment
    • Business
      • .NET
    • Other
    Teken aan
    Microsoft-ondersteuning

    Change TCP/IP settings

    Inhoud verskaf deur Microsoft

    Inhoud verskaf deur Microsoft

    Is van toepassing op: Windows 7Windows 8.1Windows 10


    TCP/IP defines how your PC communicates with other PCs.

    To make it easier to manage TCP/IP settings, we recommend using automated Dynamic Host Configuration Protocol (DHCP). DHCP automatically assigns Internet Protocol (IP) addresses to the computers on your network if your network supports it. If you use DHCP, then you don't have to change your TCP/IP settings if you move your PC to another location, and DHCP doesn't require you to manually configure TCP/IP settings, such as Domain Name System (DNS) and Windows Internet Name Service (WINS).

    To enable DHCP or change other TCP/IP settings (Windows 10)

    1. Select Start , then select Settings  > Network & Internet  > Wi-Fi .
    2. Select Manage known networks, choose the network you want to change the settings for, then select Properties.
    3. Under IP assignment, select Edit.
    4. Under Edit IP settings, select Automatic (DHCP) or Manual.
      • When you select Automatic (DHCP), the IP address settings and DNS server address setting are set automatically by your router or other access point (recommended).
      • When you select Manual, you can manually set your IP address settings and DNS server address.
      Wys alles
      To specify IPv4 settings manually
      1. Under Edit IP settings, choose Manual, then turn on IPv4.
      2. To specify an IP address, in the IP address, Subnet prefix length, and Gateway boxes, type the IP address settings.
      3. To specify a DNS server address, in the Preferred DNS and Alternate DNS boxes, type the addresses of the primary and secondary DNS servers.
      To specify IPv6 settings manually
      1. Under Edit IP settings, choose Manual, then turn on IPv6.
      2. To specify an IP address, in the IP address, Subnet prefix length, and Gateway boxes, type the IP address settings.
      3. To specify a DNS server address, in the Preferred DNS and Alternate DNS boxes, type the addresses of the primary and secondary DNS servers.
    5. When you’re done, select Save.
    Note

    To install IPv4, run Command Prompt as an administrator, type netsh interface ipv4 install, and then press Enter.

    To enable DHCP or change other TCP/IP settings (Windows 8.1 or 7)

    1. Do one of the following:
      • In Windows 8.1, select the Start button, start typing View network connections, and then select View network connections in the list.
      • In Windows 7, open Network Connections by selecting the Start button, and then selecting Control Panel. In the search box, type adapter, and then, under Network and Sharing Center, select View network connections.
    2. Right-click the connection that you want to change, and then select Properties. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
    3. Select the Networking tab. Under This connection uses the following items, select either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then select Properties.
    4. To specify IPv4 IP address settings, do one of the following:
      • To get IP settings automatically using DHCP, select Obtain an IP address automatically, and then select OK.
      • To specify an IP address, select Use the following IP address, and then, in the IP address, Subnet mask, and Default gateway boxes, type the IP address settings.
    5. To specify IPv6 IP address settings, do one of the following:
      • To get IP settings automatically using DHCP, select Obtain an IPv6 address automatically, and then select OK.
      • To specify an IP address, select Use the following IPv6 address, and then, in the IPv6 address, Subnet prefix length, and Default gateway boxes, type the IP address settings.
    6. To specify DNS server address settings, do one of the following:
      • To get a DNS server address automatically using DHCP, select Obtain DNS server address automatically, and then select OK.
      • To specify a DNS server address, select Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers.
    7. To change advanced DNS, WINS, and IP settings, select Advanced.
    Note

    To install IPv4, run Command Prompt as an administrator, type netsh interface ipv4 install, and then press Enter.


    Laas bygewerk: 17 Okt 2017
    • E-pos
    • Druk
    Dankie! Jou terugvoer sal ons help om die bystandervaring te verbeter.

    Wat’s nuut

    • Xbox One X
    • Xbox One S

    Store en Ondersteuning

    • Rekeningprofiel
    • Aflaaisentrum
    • Bestellingkontrolering
    • Ondersteuning

    Onderwys

    • Office 365 vir skole

    Besigheid

    • Vind ʼn oplossingverskaffer
    • Microsoft AppSource

    Ontwikkelaar

    • Microsoft Visual Studio
    • Microsoft Virtual Academy
    • Channel 9

    Maatskappy

    • Beroepe
    • Privaatheid by Microsoft
    Afrikaans (Suid-Afrika)
    • Terms of use
    • Privacy & cookies
    • Trademarks
    • © Microsoft 2018
    This site in other countries/regions
    Algérie - Français
    Argentina - Español
    Australia - English
    Belgique - Français
    België - Nederlands
    Bolivia - Español
    Bosna i Hercegovina - Hrvatski
    Brasil - Português
    Canada - English
    Canada - Français
    Chile - Español
    Colombia - Español
    Costa Rica - Español
    Crna Gora - Srpski
    Danmark - Dansk
    Deutschland - Deutsch
    Dominican Republic - Español
    Ecuador - Español
    Eesti - Eesti
    El Salvador - Español
    España - Español
    Estados Unidos - Español
    France - Français
    Guatemala - Español
    Hong Kong SAR - English
    Hrvatska - Hrvatski
    India - English
    Indonesia (Bahasa) - Bahasa
    Ireland - English
    Italia - Italiano
    Latvija - Latviešu
    Lietuva - Lietuvių
    Luxembourg - Français
    Magyarország - Magyar
    Malaysia - English
    Maroc - Français
    México - Español
    Nederland - Nederlands
    New Zealand - English
    Norge - Bokmål
    Panamá - Español
    Paraguay - Español
    Perú - Español
    Philippines - English
    Polska - Polski
    Portugal - Português
    Puerto Rico - Español
    România - Română
    Schweiz - Deutsch
    Singapore - English
    Slovenija - Slovenščina
    Slovensko - Slovenčina
    South Africa - English
    Srbija - Srpski
    Suisse - Français
    Suomi - Suomi
    Sverige - Svenska
    Tunisie - Français
    Türkiye - Türkçe
    United Kingdom - English
    United States - English
    Uruguay - Español
    Venezuela - Español
    Việt Nam - Tiếng việt
    Ísland - Íslenska
    Österreich - Deutsch
    Česká Republika - Čeština
    Ελλάδα - Ελληνικά
    България - Български
    Казахстан - Русский
    Россия - Русский
    Україна - Українська
    ישראל - עברית
    الإمارات العربية المتحدة - العربية
    المملكة العربية السعودية - العربية
    مصر - العربية
    भारत - हिंदी
    ไทย - ไทย
    中国 - 简体中文
    台灣 - 繁體中文
    日本 - 日本語
    香港特別行政區 - 繁體中文
    대한민국 - 한국어