Some products might not be available in your country or region.
For additional information, see Product environmental and safety documents.
This device is not intended for use in machinery, medical or industrial applications. Any changes or modifications not expressly approved by Microsoft could void the user’s authority to operate this device. This product is for use with NRTL Listed (UL, CSA, ETL, etc.), and/or IEC/EN 60950-1 or IEC/EN 62368-1 compliant (CE marked) Information Technology equipment. No serviceable parts included. This device is rated as a commercial product for operation at +50ºF (+10ºC) to +80ºF (+27ºC).
This equipment is suitable for use in Class I, Division 2 Groups A, B, C, and D when marked or Non-Hazardous Locations only.
9VDC 2A, 5VDC 3A
+10C < Ta < +35C
Note that the battery pack is not replaceable.
WARNING – EXPLOSION HAZARD – DO NOT CHARGE OR USE HEADSET JACK WHILE IN HAZARDOUS LOCATION
Disposal of Waste Batteries and Electrical & Electronic Equipment
Radio and TV Interference Regulations
- Relocate the antenna of the other radio-communications device (for example AM/FM Radios, televisions, baby monitors, cordless phones, etc.) until the interference stops.
- Move the hardware device farther away from the radio or TV, or move it to one side or the other of the radio or TV.
- Plug the device into a different power outlet so that the hardware device and radio or TV are on different circuits controlled by different circuit breakers or fuses.
- If necessary, ask your device dealer or an experienced radio-TV technician for more suggestions. For more information about interference issues, go to the FCC Web site at: http://www.fcc.gov/cgb/consumerfacts/interference.html. You can also call the FCC at 1-888-CALL FCC to request Interference and Telephone Interference fact sheets.
Model: 1688 FCC ID: C3K1688 IC: 3048A-1688
Model: 1855 FCC ID: C3K1855 IC: 3048A-1855
Exposure to Radio Frequency (RF) Energy
This device contains radio transmitters and has been designed, manufactured and tested to meet the Federal Communications Commission (FCC), Innovation, Science and Economic Development Canada (ISED) requirements and European guidelines for RF exposure and Specific Absorption Rate.
FCC website at https://www.fcc.gov/general/radio-frequency-safety-0
ISED website at http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html
For customers in the United States and Canada
Supplier’s Declaration of Conformity
Model: 1688, 1855
Responsible party: Microsoft Corporation, One Microsoft Way, Redmond, WA 98052, USA.
This Class B digital apparatus complies with Part 15 of the U.S. Federal Communications Commission (FCC) rules, Innovation, Science and Economic Development (ISED) Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications to this device not expressly approved by Microsoft could void the user’s authority to operate the device.
For customers in the EEA, United Kingdom, and Switzerland
The radio frequency bands of operation for Model 1855 and the associated maximum nominal transmit power and tolerances are as follows:
WLAN 2400-2483.5MHz, 18.30dBm EIRP +/-1dB
WLAN 5.15-5.25GHz, 21.20dBm EIRP +/-1dB
WLAN 5.25-5.35GHz, 18.50dBm EIRP +/-1dB
WLAN 5.47-5.725GHz, 18.60dBm EIRP +/-1dB
WLAN 5.725-5.85GHz, 12.7dBm EIRP +/-1dB
Bluetooth 2400-2483.5MHz, 14.9dBm EIRP +/-2dB
Company: Microsoft Ireland Operations Limited
Address: One Microsoft Place, South County Business Park, Dublin D18 P521
Telephone number: +353 1 295 3826
Fax number: +353 1 706 4110
5.15-5.35GHz indoor use only.
Simplified EU Declaration of Conformity
Hereby, Microsoft Corporation, declares that this product is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following internet address: aka.ms/eucompliancedoc
Full Declaration of Conformity also contains information such as Software and Accessories that may impact radio compliance with the above directive.
EU Energy Consumption
Model 1688: This device complies with COMMISSION REGULATION (EC) No 1275/2008 of 17 December 2008 implementing Directive 2009/125/EC of the European Parliament and of the Council with regards to eco-design requirements for standby and off mode, and networked standby, electric power consumption of electrical and electronic household and office equipment.
First Year of Manufacture 2016
Off-Mode Power Demand (watts) .28
Power Supply Efficiency 80.8%
To place the HoloLens in the lowest power state (“Off” mode), use one of the following methods:
- Say "Hey Cortana" to bring up the digital assistant and ask to turn off the device.
- Press and hold the power button for 4 seconds.
For customers in Singapore
For customers in India
This product fully complies with all relevant global regulations including the EU RoHS Directive 2011/65/EU with regards to restricted applications of Lead, Cadmium, Mercury, Hexavalent Chromium, PBDs and PBBs.
Device regulatory labels
The device regulatory label is under the brow pad. It can be accessed for viewing by removing the brow pad.
Microsoft Corporation Redmond WA 98052-6399 USA Microsoft Ireland Dublin D18 P521 IRL
Made in China Model: 1855 FCC ID: C3K1855 IC: 3048A-1855 CAN ICES-3 (B)/NMB-3 (B)
CMIIT ID: 2019AJ4176 Microsoft HoloLens 2 穿戴式電腦 使用過度恐傷視力 製造號碼: 1855
型號: 1855 輸入: 9V ⎓ 2A, 5V ⎓ 3A 生產地: 中國 型号: 1855 输入: 9V ⎓ 2A, 5V ⎓ 3A
Microsoft Corporation One Microsoft Way, Redmond, WA 98052 USA
Microsoft Ireland Sandyford, Ind Est, Dublin D18 KX32 IRL
Made in China Model: 1688
FCC ID: C3K1688 Complies with
21 CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007