The "Sales Analysis by Dim Matrix" report displays incorrect values if the Show Column Name check box is selected in a sales analysis by dimension in the RoleTailored client in Microsoft Dynamics NAV 2009 Service Pack 1

Работете навсякъде от всяко устройство с Microsoft 365

Надстройте до Microsoft 365, за да работите навсякъде с най-новите функции и актуализации.

Надстройване сега

This article applies to Microsoft Dynamics NAV for all countries and all language locales.

Symptoms

Assume that you select the Show Column Name check box in a sales analysis by dimension in the RoleTailored client (RTC) in Microsoft Dynamic NAV 2009 Service Pack 1 (SP1). When you run the Show Matrix function on the sales analysis by dimension, the values are displayed incorrectly in the "Sales Analysis by Dim Matrix" report.

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:

  • The Modify permission for the object that you will be changing.

  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.



Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:

  1. Change the code in the Purch. Analysis by Dim form (9224) as follows:
    Existing code 1

    ...
    Steps@1033 : Integer;

    // Delete the following lines.
    Dim1Filter1@1017 : Code[250];
    Dim2Filter1@1012 : Code[250];
    Dim3Filter1@1010 : Code[250];
    ItemFilter1@1009 : Code[250];
    LocationFilter1@1003 : Code[250];
    DateFilter1@1013 : Text[30];
    // End of the lines.

    DateFilter@1021 : Text[30];
    Dim1Filter@1043 : Code[250];
    ...

    Replacement code 1

    ...
    Steps@1033 : Integer;
    DateFilter@1021 : Text[30];
    Dim1Filter@1043 : Code[250];
    ...

    Existing code 2

    ...
    LOCAL PROCEDURE FillColumnsItem@9(VAR MatrixColumnCaptions@1009 : ARRAY [32] OF Text[30]) : Boolean;

    BEGIN
    CLEAR(MatrixColumnCaptions);
    i := 1;

    // Delete the following line.
    Item.SETFILTER("No.",ItemFilter1);

    ...

    Replacement code 2

    ...
    LOCAL PROCEDURE FillColumnsItem@9(VAR MatrixColumnCaptions@1009 : ARRAY [32] OF Text[30]) : Boolean;

    // Add the following lines.
    VAR
    Item@1013 : Record 27;
    i@1004 : Integer;
    // End of the lines.

    BEGIN
    CLEAR(MatrixColumnCaptions);
    i := 1;

    // Add the following line.
    Item.SETFILTER("No.",ItemFilter);
    ...
  2. Change the code in the FillColumnsLocation function in the Purch. Analysis by Dim form (9224) as follow:
    Existing code

    ...

    BEGIN
    CLEAR(MatrixColumnCaptions);
    i := 1;

    // Delete the following line.
    Location.SETFILTER(Code,LocationFilter1);

    ...

    Replacement code

    ...
    CLEAR(MatrixColumnCaptions);
    i := 1;

    // Add the following line.
    Location.SETFILTER(Code,LocationFilter);

    ...
  3. Change the code in the ShowMatrix function in the Purch. Analysis by Dim form (9224) as follow:
    Existing code

    ...
    BEGIN

    // Delete the following line.
    ApplyColumnFilter;


    PurchAnalysisByDimMatrix.LoadVariables(ItemAnalysisView,ItemStatisticsBuffer,
    CurrentItemAnalysisViewCode,CurrentAnalysisArea,
    LineDimOption,ColumnDimOption,LineDimCode,ColumnDimCode,PeriodType,ValueType,
    RoundingFactor,ShowActualBudget,MatrixColumnCaptions,

    // Delete the following line.
    ShowOppositeSign,PeriodInitialized,FirstColumn,LastColumn,ShowColumnName,MATRIX_CurrSetLength);

    ...

    Replacement code

    ...
    BEGIN

    PurchAnalysisByDimMatrix.LoadVariables(ItemAnalysisView,ItemStatisticsBuffer,
    CurrentItemAnalysisViewCode,CurrentAnalysisArea,
    LineDimOption,ColumnDimOption,LineDimCode,ColumnDimCode,PeriodType,ValueType,
    RoundingFactor,ShowActualBudget,MatrixColumnCaptions,

    // Add the following line.
    ShowOppositeSign,PeriodInitialized,ShowColumnName,MATRIX_CurrSetLength);

    ...
  4. Delete the ApplyColumnFilter function in the Purch. Analysis by Dim form (9224) as follow:

    // Delete the following lines.
    PROCEDURE ApplyColumnFilter@13();

    BEGIN
    CLEAR(ItemFilter1);
    CLEAR(LocationFilter1);
    CLEAR(DateFilter1);
    CLEAR(Dim1Filter1);
    CLEAR(Dim2Filter1);
    CLEAR(Dim3Filter1);
    CASE ColumnDimOption OF
    ColumnDimOption::Item:
    BEGIN
    IF ItemFilter <> '' THEN
    ItemFilter1 := ItemFilter + '&';
    ItemFilter1 := ItemFilter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::Location:
    BEGIN
    ItemFilter1 := ItemFilter;
    IF LocationFilter <> '' THEN
    LocationFilter1 := LocationFilter + '&';
    LocationFilter1 := LocationFilter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::Period:
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 1":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    IF Dim1Filter <> '' THEN
    Dim1Filter1 := Dim1Filter + '&';
    Dim1Filter1 := Dim1Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 2":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    IF Dim2Filter <> '' THEN
    Dim2Filter1 := Dim2Filter + '&';
    Dim2Filter1 := Dim2Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 3":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    IF Dim3Filter <> '' THEN
    Dim3Filter1 := Dim3Filter + '&';
    Dim3Filter1 := Dim3Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    END;
    END;
    END;
    // End of the lines.
  5. Change the code in the properties in the Purch. Analysis by Dim Matrix form (9225) as follow:
    Existing code

    {
    Width=19140;
    Height=6710;
    Editable=No;
    TableBoxID=1;
    LinksAllowed=No;
    SourceTable=Table367;
    OnOpenForm=BEGIN

    // Delete the following line.
    ApplyColumnFilter;

    CurrForm.Field1.VISIBLE(1 <= NoOfRecords);
    ...

    Replacement code

    {
    Width=19140;
    Height=6710;
    Editable=No;
    TableBoxID=1;
    LinksAllowed=No;
    SourceTable=Table367;
    OnOpenForm=BEGIN
    CurrForm.Field1.VISIBLE(1 <= NoOfRecords);

    ...
  6. Change the code in the Purch. Analysis by Dim Matrix form (9225) as follows:
    Existing code 1

    ...
    OnAfterGetRecord=BEGIN
    IF CurrForm.TotalQuantity.VISIBLE THEN
    Quantity := CalcAmt(DimCodeBufferColumn,2,FALSE);
    IF CurrForm.TotalInvtValue.VISIBLE THEN
    Amount := CalcAmt(DimCodeBufferColumn,1,FALSE);
    Steps := 1;

    // Delete the following line.
    ApplyColumnFilter;

    Which := '-';

    ItemAnalysisMgt.FindRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,PeriodInitialized,InternalDateFilter,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    i := 1;
    WHILE (i <= NoOfRecords) AND (i <= ARRAYLEN(MatrixColumnCaptions)) DO BEGIN
    MatrixData[i] := CalcAmt(DimCodeBufferColumn3,ValueType,TRUE);
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    i := i + 1;
    END;
    END;

    OnAfterGetCurrRecord=BEGIN
    IF CurrForm.TotalQuantity.VISIBLE THEN
    Quantity := CalcAmt(DimCodeBufferColumn,2,FALSE);
    IF CurrForm.TotalInvtValue.VISIBLE THEN
    Amount := CalcAmt(DimCodeBufferColumn,1,FALSE);
    Steps := 1;

    // Delete the following line.
    ApplyColumnFilter;

    Which := '-';

    ItemAnalysisMgt.FindRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,PeriodInitialized,InternalDateFilter,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    i := 1;
    WHILE (i <= NoOfRecords) AND (i <= ARRAYLEN(MatrixColumnCaptions)) DO BEGIN
    MatrixData[i] := CalcAmt(DimCodeBufferColumn3,ValueType,TRUE);
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    i := i + 1;
    END;
    END;
    }
    ...

    Replacement code 1

    ...
    OnAfterGetRecord=BEGIN
    IF CurrForm.TotalQuantity.VISIBLE THEN
    Quantity := CalcAmt(DimCodeBufferColumn,2,FALSE);
    IF CurrForm.TotalInvtValue.VISIBLE THEN
    Amount := CalcAmt(DimCodeBufferColumn,1,FALSE);
    Steps := 1;

    Which := '-';

    ItemAnalysisMgt.FindRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which,

    // Add the following lines.
    ItemFilter,LocationFilter,PeriodType,DateFilter,PeriodInitialized,InternalDateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    i := 1;
    WHILE (i <= NoOfRecords) AND (i <= ARRAYLEN(MatrixColumnCaptions)) DO BEGIN
    MatrixData[i] := CalcAmt(DimCodeBufferColumn3,ValueType,TRUE);
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Add the following lines.
    ItemFilter,LocationFilter,PeriodType,DateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    i := i + 1;
    END;
    END;

    OnAfterGetCurrRecord=BEGIN
    IF CurrForm.TotalQuantity.VISIBLE THEN
    Quantity := CalcAmt(DimCodeBufferColumn,2,FALSE);
    IF CurrForm.TotalInvtValue.VISIBLE THEN
    Amount := CalcAmt(DimCodeBufferColumn,1,FALSE);
    Steps := 1;
    Which := '-';

    ItemAnalysisMgt.FindRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which,

    // Add the following lines.
    ItemFilter,LocationFilter,PeriodType,DateFilter,PeriodInitialized,InternalDateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    i := 1;
    WHILE (i <= NoOfRecords) AND (i <= ARRAYLEN(MatrixColumnCaptions)) DO BEGIN
    MatrixData[i] := CalcAmt(DimCodeBufferColumn3,ValueType,TRUE);
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Add the following lines.
    ItemFilter,LocationFilter,PeriodType,DateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    i := i + 1;
    END;
    END;
    }
    ...

    Existing code 2

    ...
    Text001@1032 : TextConst 'ENU=<Precision,';
    Text002@1031 : TextConst 'ENU=><Standard Format,0>';

    // Delete the following lines.
    LocationFilter1@1043 : Code[250];
    ItemFilter1@1042 : Code[250];
    Dim1Filter1@1041 : Code[250];
    Dim2Filter1@1040 : Code[250];
    Dim3Filter1@1039 : Code[250];
    DateFilter1@1038 : Text[30];
    FirstColumn@1044 : Text[50];
    LastColumn@1045 : Text[50];
    // End of the lines.

    ShowColumnName@1036 : Boolean;
    ...

    Replacement code 2

    ...
    Text001@1032 : TextConst 'ENU=<Precision,';
    Text002@1031 : TextConst 'ENU=><Standard Format,0>';
    ShowColumnName@1036 : Boolean;
    ...

    Existing code 3

    ...PROCEDURE LoadVariables@1(ItemAnalysisView1@1000 : Record 7152;ItemStatisticsBuffer1@1004 : Record 5821;CurrentItemAnalysisViewCode1@1005 : Code[10];
    CurrentAnalysisArea1@1003 : 'Sales,Purchase,Inventory';LineDimOption1@1010 : 'Item,Period,Location,Dimension 1,Dimension 2,Dimension 3';
    ColumnDimOption1@1002 : 'Item,Period,Location,Dimension 1,Dimension 2,Dimension 3';LineDimCode1@1016 : Text[30];ColumnDimCode1@1015 : Text[30];
    PeriodType1@1007 : 'Day,Week,Month,Quarter,Year,Accounting Period';ValueType1@1009 : 'Sales Amount,Inventory Value,Sales Quantity';
    RoundingFactor1@1011 : 'None,1,1000,1000000';ShowActualBudget1@1012 : 'Actual Amounts,Budgeted Amounts,Variance,Variance%,Index%';
    MatrixColumnCaptions1@1001 : ARRAY [32] OF Text[1024];ShowOppositeSign1@1006 : Boolean;PeriodInitialized1@1008 : Boolean;

    // Delete the following line.
    FirstColumn1@1014 : Text[50];LastColumn1@1013 : Text[50];

    ShowColumnName1@1017 : Boolean;NoOfRecordsLocal@1018 : Integer);

    BEGIN
    CLEAR(MatrixColumnCaptions);
    ItemAnalysisView.COPY(ItemAnalysisView1);

    CurrentItemAnalysisViewCode := CurrentItemAnalysisViewCode1;
    CurrentAnalysisArea := CurrentAnalysisArea1;

    LineDimOption := LineDimOption1;
    ColumnDimOption := ColumnDimOption1;

    LineDimCode := LineDimCode1;
    ColumnDimCode := ColumnDimCode1;

    PeriodType := PeriodType1;
    ShowOppositeSign := ShowOppositeSign1;

    COPYARRAY(MatrixColumnCaptions,MatrixColumnCaptions1,1);

    PeriodInitialized := PeriodInitialized1;
    PeriodType := PeriodType1;
    ValueType := ValueType1;
    RoundingFactor := RoundingFactor1;
    ShowActualBudget := ShowActualBudget1;

    // Delete the following lines.
    FirstColumn := FirstColumn1;
    LastColumn := LastColumn1;
    // End of the lines.

    ShowColumnName := ShowColumnName1;
    NoOfRecords := NoOfRecordsLocal;
    END;...

    Replacement code 3

    ...PROCEDURE LoadVariables@1(ItemAnalysisView1@1000 : Record 7152;ItemStatisticsBuffer1@1004 : Record 5821;CurrentItemAnalysisViewCode1@1005 : Code[10];
    CurrentAnalysisArea1@1003 : 'Sales,Purchase,Inventory';LineDimOption1@1010 : 'Item,Period,Location,Dimension 1,Dimension 2,Dimension 3';
    ColumnDimOption1@1002 : 'Item,Period,Location,Dimension 1,Dimension 2,Dimension 3';LineDimCode1@1016 : Text[30];ColumnDimCode1@1015 : Text[30];
    PeriodType1@1007 : 'Day,Week,Month,Quarter,Year,Accounting Period';ValueType1@1009 : 'Sales Amount,Inventory Value,Sales Quantity';
    RoundingFactor1@1011 : 'None,1,1000,1000000';ShowActualBudget1@1012 : 'Actual Amounts,Budgeted Amounts,Variance,Variance%,Index%';
    MatrixColumnCaptions1@1001 : ARRAY [32] OF Text[1024];ShowOppositeSign1@1006 : Boolean;PeriodInitialized1@1008 : Boolean;
    ShowColumnName1@1017 : Boolean;NoOfRecordsLocal@1018 : Integer);

    BEGIN
    CLEAR(MatrixColumnCaptions);
    ItemAnalysisView.COPY(ItemAnalysisView1);

    CurrentItemAnalysisViewCode := CurrentItemAnalysisViewCode1;
    CurrentAnalysisArea := CurrentAnalysisArea1;

    LineDimOption := LineDimOption1;
    ColumnDimOption := ColumnDimOption1;

    LineDimCode := LineDimCode1;
    ColumnDimCode := ColumnDimCode1;

    PeriodType := PeriodType1;
    ShowOppositeSign := ShowOppositeSign1;

    COPYARRAY(MatrixColumnCaptions,MatrixColumnCaptions1,1);

    PeriodInitialized := PeriodInitialized1;
    PeriodType := PeriodType1;
    ValueType := ValueType1;
    RoundingFactor := RoundingFactor1;
    ShowActualBudget := ShowActualBudget1;

    ShowColumnName := ShowColumnName1;
    NoOfRecords := NoOfRecordsLocal;
    END;
    ...
  7. Change the code in the FieldDrillDown function in the Purch. Analysis by Dim Matrix form (9225) as follow:
    Existing code

    BEGIN
    CLEAR(DimCodeBufferColumn3);
    Which := '-';

    ItemAnalysisMgt.FindRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,PeriodInitialized,InternalDateFilter,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    Steps := Ordinal - 1;
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    ItemAnalysisMgt.DrillDown(
    CurrentAnalysisArea,ItemStatisticsBuffer,CurrentItemAnalysisViewCode,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,DateFilter1,
    Dim1Filter1,Dim2Filter1,Dim3Filter1,BudgetFilter,
    // End of the lines.

    LineDimOption,Rec,
    ColumnDimOption,DimCodeBufferColumn3,
    TRUE,ValueType,ShowActualBudget);
    END;

    Replacement code

    BEGIN
    CLEAR(DimCodeBufferColumn3);
    Which := '-';

    ItemAnalysisMgt.FindRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which,

    // Add the following lines.
    ItemFilter,LocationFilter,PeriodType,DateFilter,PeriodInitialized,InternalDateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    Steps := Ordinal - 1;
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Add the following lines.
    ItemFilter,LocationFilter,PeriodType,DateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    ItemAnalysisMgt.DrillDown(
    CurrentAnalysisArea,ItemStatisticsBuffer,CurrentItemAnalysisViewCode,

    // Add the following lines.
    ItemFilter,LocationFilter,DateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter,BudgetFilter,
    // End of the lines.

    LineDimOption,Rec,
    ColumnDimOption,DimCodeBufferColumn3,
    TRUE,ValueType,ShowActualBudget);
    END;
  8. Delete the ApplyColumnFilter function in the Purch. Analysis by Dim Matrix form (9225) as follow:

    // Delete the following lines.
    PROCEDURE ApplyColumnFilter@13();
    BEGIN
    CLEAR(ItemFilter1);
    CLEAR(LocationFilter1);
    CLEAR(DateFilter1);
    CLEAR(Dim1Filter1);
    CLEAR(Dim2Filter1);
    CLEAR(Dim3Filter1);

    CASE ColumnDimOption OF
    ColumnDimOption::Item:
    BEGIN
    IF ItemFilter <> '' THEN
    ItemFilter1 := ItemFilter + '&';
    ItemFilter1 := ItemFilter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::Location:
    BEGIN
    ItemFilter1 := ItemFilter;
    IF LocationFilter <> '' THEN
    LocationFilter1 := LocationFilter + '&';
    LocationFilter1 := LocationFilter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::Period:
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    IF DateFilter <> '' THEN
    DateFilter1 := DateFilter
    ELSE
    DateFilter1 := FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 1":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    IF Dim1Filter <> '' THEN
    Dim1Filter1 := Dim1Filter + '&';
    Dim1Filter1 := Dim1Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 2":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    IF Dim2Filter <> '' THEN
    Dim2Filter1 := Dim2Filter + '&';
    Dim2Filter1 := Dim2Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 3":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    IF Dim3Filter <> '' THEN
    Dim3Filter1 := Dim3Filter + '&';
    Dim3Filter1 := Dim3Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    END;
    END;
    END;

    BEGIN
    END.
    }
    }
    // End of the lines.
  9. Change the code in the Sales Analysis by Dim form (9226) as follows:
    Existing code 1

    ...
    Text001@1024 : TextConst 'ENU=<Precision,';
    Text002@1023 : TextConst 'ENU=><Standard Format,0>';
    Steps@1033 : Integer;

    // Delete the following lines.
    Dim1Filter1@1017 : Code[250];
    Dim2Filter1@1012 : Code[250];
    Dim3Filter1@1010 : Code[250];
    ItemFilter1@1009 : Code[250];
    LocationFilter1@1003 : Code[250];
    DateFilter1@1013 : Text[30];
    // End of the lines.

    DateFilter@1021 : Text[30];
    Dim1Filter@1043 : Code[250];
    Dim2Filter@1042 : Code[250];
    Dim3Filter@1041 : Code[250];
    ItemFilter@1040 : Code[250];
    ...

    Replacement code 1

    ...
    Text001@1024 : TextConst 'ENU=<Precision,';
    Text002@1023 : TextConst 'ENU=><Standard Format,0>';
    Steps@1033 : Integer;
    DateFilter@1021 : Text[30];
    Dim1Filter@1043 : Code[250];
    Dim2Filter@1042 : Code[250];
    Dim3Filter@1041 : Code[250];
    ItemFilter@1040 : Code[250];
    ...

    Existing code 2

    ...LOCAL PROCEDURE FillColumnsItem@9(VAR MatrixColumnCaptions@1009 : ARRAY [32] OF Text[30]) : Boolean;

    VAR
    Item@1013 : Record 27;
    i@1004 : Integer;

    BEGIN
    CLEAR(MatrixColumnCaptions);
    i := 1;

    // Delete the following line.
    Item.SETFILTER("No.",ItemFilter1);...

    Replacement code 2

    ...LOCAL PROCEDURE FillColumnsItem@9(VAR MatrixColumnCaptions@1009 : ARRAY [32] OF Text[30]) : Boolean;

    VAR
    Item@1013 : Record 27;
    i@1004 : Integer;

    BEGIN
    CLEAR(MatrixColumnCaptions);
    i := 1;

    // Add the following line.
    Item.SETFILTER("No.",ItemFilter);
    ...
  10. Change the code in the FillColumnsLocation function in the Sales Analysis by Dim form (9226) as follow:
    Existing code

    ...BEGIN
    CLEAR(MatrixColumnCaptions);
    i := 1;

    // Delete the following line.
    Location.SETFILTER(Code,LocationFilter1);...

    Replacement code

    ...BEGIN
    CLEAR(MatrixColumnCaptions);
    i := 1;

    // Add the following line.
    Location.SETFILTER(Code,LocationFilter);...
  11. Change the code in the FillColumnsDim function in the Sales Analysis by Dim form (9226) as follow:
    Existing code

    ...BEGIN
    CLEAR(MatrixColumnCaptions);

    // Delete the following line.
    ApplyColumnFilter;

    DimVal.SETRANGE("Dimension Code",DimensionCode);
    DimVal.SETFILTER(Code,DimFilter);
    i := 1;...

    Replacement code

    ...BEGIN
    CLEAR(MatrixColumnCaptions);
    DimVal.SETRANGE("Dimension Code",DimensionCode);
    DimVal.SETFILTER(Code,DimFilter);
    i := 1;...
  12. Change the code in the ShowMatrix function in the Sales Analysis by Dim form (9226) as follow:
    Existing code

    ...BEGIN

    // Delete the following line.
    ApplyColumnFilter;

    IF ColumnDimOption = ColumnDimOption::Period THEN BEGIN
    FirstColumn := FORMAT(FirstColumnDate);
    LastColumn := FORMAT(LastColumnDate);
    END;

    SalesAnalysisByDimMatrix.LoadVariables(ItemAnalysisView,ItemStatisticsBuffer,
    CurrentItemAnalysisViewCode,CurrentAnalysisArea,
    LineDimOption,ColumnDimOption,LineDimCode,ColumnDimCode,PeriodType,ValueType,
    RoundingFactor,ShowActualBudget,MatrixColumnCaptions,
    ShowOppositeSign,PeriodInitialized,FirstColumn,LastColumn,ShowColumnName,MATRIX_CurrSetLength);

    SalesAnalysisByDimMatrix.LoadFilters(ItemFilter,LocationFilter,Dim1Filter,Dim2Filter,Dim3Filter,
    DateFilter,BudgetFilter,InternalDateFilter);

    SalesAnalysisByDimMatrix.RUNMODAL;
    END;...

    Replacement code

    ...
    BEGIN

    IF ColumnDimOption = ColumnDimOption::Period THEN BEGIN
    FirstColumn := FORMAT(FirstColumnDate);
    LastColumn := FORMAT(LastColumnDate);
    END;

    SalesAnalysisByDimMatrix.LoadVariables(ItemAnalysisView,ItemStatisticsBuffer,
    CurrentItemAnalysisViewCode,CurrentAnalysisArea,
    LineDimOption,ColumnDimOption,LineDimCode,ColumnDimCode,PeriodType,ValueType,
    RoundingFactor,ShowActualBudget,MatrixColumnCaptions,
    ShowOppositeSign,PeriodInitialized,ShowColumnName,MATRIX_CurrSetLength);

    SalesAnalysisByDimMatrix.LoadFilters(ItemFilter,LocationFilter,Dim1Filter,Dim2Filter,Dim3Filter,
    DateFilter,BudgetFilter,InternalDateFilter);

    SalesAnalysisByDimMatrix.RUNMODAL;
    END;
    ...
  13. Delete the ApplyColumnFilter function in the Sales Analysis by Dim form (9226) as follow:

    // Delete the following lines.
    PROCEDURE ApplyColumnFilter@13();

    BEGIN
    CLEAR(ItemFilter1);
    CLEAR(LocationFilter1);
    CLEAR(DateFilter1);
    CLEAR(Dim1Filter1);
    CLEAR(Dim2Filter1);
    CLEAR(Dim3Filter1);

    CASE ColumnDimOption OF
    ColumnDimOption::Item:
    BEGIN
    IF ItemFilter <> '' THEN
    ItemFilter1 := ItemFilter + '&';
    ItemFilter1 := ItemFilter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::Location:
    BEGIN
    ItemFilter1 := ItemFilter;
    IF LocationFilter <> '' THEN
    LocationFilter1 := LocationFilter + '&';
    LocationFilter1 := LocationFilter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::Period:
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 1":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    IF Dim1Filter <> '' THEN
    Dim1Filter1 := Dim1Filter + '&';
    Dim1Filter1 := Dim1Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 2":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    IF Dim2Filter <> '' THEN
    Dim2Filter1 := Dim2Filter + '&';
    Dim2Filter1 := Dim2Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 3":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    IF Dim3Filter <> '' THEN
    Dim3Filter1 := Dim3Filter + '&';
    Dim3Filter1 := Dim3Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    END;
    END;
    END;
    // End of the lines.
  14. Change the code in the Sales Analysis by Dim Matrix form (9227) as follows:
    Existing code 1


    SourceTable=Table367;
    OnOpenForm=BEGIN

    // Delete the following line.
    ApplyColumnFilter;

    CurrForm.Field1.VISIBLE(1 <= NoOfRecords);
    CurrForm.Field2.VISIBLE(2 <= NoOfRecords);

    Replacement code 1


    SourceTable=Table367;
    OnOpenForm=BEGIN

    CurrForm.Field1.VISIBLE(1 <= NoOfRecords);
    CurrForm.Field2.VISIBLE(2 <= NoOfRecords);

    Existing code 2


    OnAfterGetRecord=BEGIN
    IF CurrForm.TotalQuantity.VISIBLE THEN
    Quantity := CalcAmt(DimCodeBufferColumn,2,FALSE);
    IF CurrForm.TotalInvtValue.VISIBLE THEN
    Amount := CalcAmt(DimCodeBufferColumn,0,FALSE);
    Steps := 1;

    // Delete the following line.
    ApplyColumnFilter;

    Which := '-';

    ItemAnalysisMgt.FindRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,PeriodInitialized,InternalDateFilter,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    i := 1;
    WHILE (i <= NoOfRecords) AND (i <= ARRAYLEN(MatrixColumnCaptions)) DO BEGIN
    MatrixData[i] := CalcAmt(DimCodeBufferColumn3,ValueType,TRUE);
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,
    ItemFilter,LocationFilter,PeriodType,DateFilter,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    Dim1Filter,Dim2Filter,Dim3Filter);
    i := i + 1;
    END;
    END;

    OnAfterGetCurrRecord=BEGIN
    IF CurrForm.TotalQuantity.VISIBLE THEN
    Quantity := CalcAmt(DimCodeBufferColumn,2,FALSE);
    IF CurrForm.TotalInvtValue.VISIBLE THEN
    Amount := CalcAmt(DimCodeBufferColumn,0,FALSE);
    Steps := 1;

    // Delete the following line.
    ApplyColumnFilter;

    Which := '-';

    ItemAnalysisMgt.FindRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,PeriodInitialized,InternalDateFilter,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    i := 1;
    WHILE (i <= NoOfRecords) AND (i <= ARRAYLEN(MatrixColumnCaptions)) DO BEGIN
    MatrixData[i] := CalcAmt(DimCodeBufferColumn3,ValueType,TRUE);
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    i := i + 1;
    END;
    END;
    }

    Replacement code 2


    OnAfterGetRecord=BEGIN
    IF CurrForm.TotalQuantity.VISIBLE THEN
    Quantity := CalcAmt(DimCodeBufferColumn,2,FALSE);
    IF CurrForm.TotalInvtValue.VISIBLE THEN
    Amount := CalcAmt(DimCodeBufferColumn,0,FALSE);
    Steps := 1;
    Which := '-';

    ItemAnalysisMgt.FindRec(

    // Add the following lines.
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which, ItemFilter,LocationFilter,PeriodType,DateFilter,PeriodInitialized,InternalDateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    i := 1;
    WHILE (i <= NoOfRecords) AND (i <= ARRAYLEN(MatrixColumnCaptions)) DO BEGIN
    MatrixData[i] := CalcAmt(DimCodeBufferColumn3,ValueType,TRUE);
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Add the following lines.
    ItemFilter,LocationFilter,PeriodType,DateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    i := i + 1;
    END;
    END;

    OnAfterGetCurrRecord=BEGIN
    IF CurrForm.TotalQuantity.VISIBLE THEN
    Quantity := CalcAmt(DimCodeBufferColumn,2,FALSE);
    IF CurrForm.TotalInvtValue.VISIBLE THEN
    Amount := CalcAmt(DimCodeBufferColumn,0,FALSE);
    Steps := 1;
    Which := '-';

    ItemAnalysisMgt.FindRec(

    // Add the following lines.
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which, ItemFilter,LocationFilter,PeriodType,DateFilter,PeriodInitialized,InternalDateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    i := 1;
    WHILE (i <= NoOfRecords) AND (i <= ARRAYLEN(MatrixColumnCaptions)) DO BEGIN
    MatrixData[i] := CalcAmt(DimCodeBufferColumn3,ValueType,TRUE);
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Add the following lines.
    ItemFilter,LocationFilter,PeriodType,DateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    i := i + 1;
    END;
    END;
    }

    Existing code 3


    Text002@1031 : TextConst 'ENU=><Standard Format,0>';

    // Delete the following lines.
    LocationFilter1@1043 : Code[250];
    ItemFilter1@1042 : Code[250];
    Dim1Filter1@1041 : Code[250];
    Dim2Filter1@1040 : Code[250];
    Dim3Filter1@1039 : Code[250];
    DateFilter1@1038 : Text[30];
    FirstColumn@1044 : Text[50];
    LastColumn@1045 : Text[50];
    // End of the lines.

    ShowColumnName@1027 : Boolean;

    Replacement code 3


    Text002@1031 : TextConst 'ENU=><Standard Format,0>';
    ShowColumnName@1027 : Boolean;

    Existing code 4

    …PROCEDURE LoadVariables@1(ItemAnalysisView1@1000 : Record 7152;ItemStatisticsBuffer1@1004 : Record 5821;CurrentItemAnalysisViewCode1@1005 : Code[10];
    CurrentAnalysisArea1@1003 : 'Sales,Purchase,Inventory';LineDimOption1@1010 : 'Item,Period,Location,Dimension 1,Dimension 2,Dimension 3';
    ColumnDimOption1@1002 : 'Item,Period,Location,Dimension 1,Dimension 2,Dimension 3';LineDimCode1@1016 : Text[30];ColumnDimCode1@1015 : Text[30];
    PeriodType1@1007 : 'Day,Week,Month,Quarter,Year,Accounting Period';ValueType1@1009 : 'Sales Amount,Inventory Value,Sales Quantity';
    RoundingFactor1@1011 : 'None,1,1000,1000000';ShowActualBudget1@1012 : 'Actual Amounts,Budgeted Amounts,Variance,Variance%,Index%';
    MatrixColumnCaptions1@1001 : ARRAY [32] OF Text[1024];ShowOppositeSign1@1006 : Boolean;PeriodInitialized1@1008 : Boolean;

    // Delete the following line.
    FirstColumn1@1014 : Text[50];LastColumn1@1013 : Text[50];

    ShowColumnName1@1017 : Boolean;NoOfRecordsLocal@1018 : Integer);

    BEGIN
    CLEAR(MatrixColumnCaptions);
    ItemAnalysisView.COPY(ItemAnalysisView1);

    CurrentItemAnalysisViewCode := CurrentItemAnalysisViewCode1;
    CurrentAnalysisArea := CurrentAnalysisArea1;

    LineDimOption := LineDimOption1;
    ColumnDimOption := ColumnDimOption1;

    LineDimCode := LineDimCode1;
    ColumnDimCode := ColumnDimCode1;

    PeriodType := PeriodType1;
    ShowOppositeSign := ShowOppositeSign1;

    COPYARRAY(MatrixColumnCaptions,MatrixColumnCaptions1,1);

    PeriodInitialized := PeriodInitialized1;
    PeriodType := PeriodType1;
    ValueType := ValueType1;
    RoundingFactor := RoundingFactor1;
    ShowActualBudget := ShowActualBudget1;

    // Delete the following lines.
    FirstColumn := FirstColumn1;
    LastColumn := LastColumn1;
    // End of the lines.

    ShowColumnName := ShowColumnName1;
    NoOfRecords := NoOfRecordsLocal;
    END;…

    Replacement code 4

    …PROCEDURE LoadVariables@1(ItemAnalysisView1@1000 : Record 7152;ItemStatisticsBuffer1@1004 : Record 5821;CurrentItemAnalysisViewCode1@1005 : Code[10];
    CurrentAnalysisArea1@1003 : 'Sales,Purchase,Inventory';LineDimOption1@1010 : 'Item,Period,Location,Dimension 1,Dimension 2,Dimension 3';
    ColumnDimOption1@1002 : 'Item,Period,Location,Dimension 1,Dimension 2,Dimension 3';LineDimCode1@1016 : Text[30];ColumnDimCode1@1015 : Text[30];
    PeriodType1@1007 : 'Day,Week,Month,Quarter,Year,Accounting Period';ValueType1@1009 : 'Sales Amount,Inventory Value,Sales Quantity';
    RoundingFactor1@1011 : 'None,1,1000,1000000';ShowActualBudget1@1012 : 'Actual Amounts,Budgeted Amounts,Variance,Variance%,Index%';
    MatrixColumnCaptions1@1001 : ARRAY [32] OF Text[1024];ShowOppositeSign1@1006 : Boolean;PeriodInitialized1@1008 : Boolean;
    ShowColumnName1@1017 : Boolean;NoOfRecordsLocal@1018 : Integer);

    BEGIN
    CLEAR(MatrixColumnCaptions);
    ItemAnalysisView.COPY(ItemAnalysisView1);

    CurrentItemAnalysisViewCode := CurrentItemAnalysisViewCode1;
    CurrentAnalysisArea := CurrentAnalysisArea1;

    LineDimOption := LineDimOption1;
    ColumnDimOption := ColumnDimOption1;

    LineDimCode := LineDimCode1;
    ColumnDimCode := ColumnDimCode1;

    PeriodType := PeriodType1;
    ShowOppositeSign := ShowOppositeSign1;

    COPYARRAY(MatrixColumnCaptions,MatrixColumnCaptions1,1);

    PeriodInitialized := PeriodInitialized1;
    PeriodType := PeriodType1;
    ValueType := ValueType1;
    RoundingFactor := RoundingFactor1;
    ShowActualBudget := ShowActualBudget1;

    ShowColumnName := ShowColumnName1;
    NoOfRecords := NoOfRecordsLocal;
    END;…
  15. Change the code in the FieldDrillDown function in the Sales Analysis by Dim Matrix form (9227) as follow:
    Existing code

    BEGIN
    CLEAR(DimCodeBufferColumn3);
    Which := '-';

    ItemAnalysisMgt.FindRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,PeriodInitialized,InternalDateFilter,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    Steps := Ordinal - 1;
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,PeriodType,DateFilter1,
    Dim1Filter1,Dim2Filter1,Dim3Filter1);
    // End of the lines.

    ItemAnalysisMgt.DrillDown(
    CurrentAnalysisArea,ItemStatisticsBuffer,CurrentItemAnalysisViewCode,

    // Delete the following lines.
    ItemFilter1,LocationFilter1,DateFilter1,
    Dim1Filter1,Dim2Filter1,Dim3Filter1,BudgetFilter,
    // End of the lines.

    LineDimOption,Rec,
    ColumnDimOption,DimCodeBufferColumn3,
    TRUE,ValueType,ShowActualBudget);
    END;

    Replacement code

    BEGIN
    CLEAR(DimCodeBufferColumn3);
    Which := '-';

    ItemAnalysisMgt.FindRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Which,

    // Add the following lines.
    ItemFilter,LocationFilter,PeriodType,DateFilter,PeriodInitialized,InternalDateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    Steps := Ordinal - 1;
    ItemAnalysisMgt.NextRec(
    ItemAnalysisView,ColumnDimOption,DimCodeBufferColumn3,Steps,

    // Add the following lines.
    ItemFilter,LocationFilter,PeriodType,DateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter);
    // End of the lines.

    ItemAnalysisMgt.DrillDown(
    CurrentAnalysisArea,ItemStatisticsBuffer,CurrentItemAnalysisViewCode,

    // Add the following lines.
    ItemFilter,LocationFilter,DateFilter,
    Dim1Filter,Dim2Filter,Dim3Filter,BudgetFilter,
    // End of the lines.

    LineDimOption,Rec,
    ColumnDimOption,DimCodeBufferColumn3,
    TRUE,ValueType,ShowActualBudget);
    END;
  16. Delete the ApplyColumnFilter function in the Sales Analysis by Dim Matrix form (9227) as follow:

    // Delete the following lines.
    BEGIN
    CLEAR(ItemFilter1);
    CLEAR(LocationFilter1);
    CLEAR(DateFilter1);
    CLEAR(Dim1Filter1);
    CLEAR(Dim2Filter1);
    CLEAR(Dim3Filter1);

    CASE ColumnDimOption OF
    ColumnDimOption::Item:
    BEGIN
    IF ItemFilter <> '' THEN
    ItemFilter1 := ItemFilter + '&';
    ItemFilter1 := ItemFilter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::Location:
    BEGIN
    ItemFilter1 := ItemFilter;
    IF LocationFilter <> '' THEN
    LocationFilter1 := LocationFilter + '&';
    LocationFilter1 := LocationFilter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::Period:
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    IF DateFilter <> '' THEN
    DateFilter1 := DateFilter
    ELSE
    DateFilter1 := FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 1":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    IF Dim1Filter <> '' THEN
    Dim1Filter1 := Dim1Filter + '&';
    Dim1Filter1 := Dim1Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    Dim2Filter1 := Dim2Filter;
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 2":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    IF Dim2Filter <> '' THEN
    Dim2Filter1 := Dim2Filter + '&';
    Dim2Filter1 := Dim2Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    Dim3Filter1 := Dim3Filter;
    END;
    ColumnDimOption::"Dimension 3":
    BEGIN
    ItemFilter1 := ItemFilter;
    LocationFilter1 := LocationFilter;
    DateFilter1 := DateFilter;
    Dim1Filter1 := Dim1Filter;
    Dim2Filter1 := Dim2Filter;
    IF Dim3Filter <> '' THEN
    Dim3Filter1 := Dim3Filter + '&';
    Dim3Filter1 := Dim3Filter1 + FORMAT(FirstColumn) + '..' + FORMAT(LastColumn);
    END;
    END;
    END;

    BEGIN
    END.
    }
    }
    // End of the lines.



Prerequisites

You must have Microsoft Dynamics NAV 2009 Service Pack 1 installed to apply this hotfix.

Removal information

You cannot remove this hotfix.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Нуждаете се от още помощ?

Разширете уменията си
Преглед на обучението
Получавайте първи новите функции
Присъединете се към Microsoft приобщени

Беше ли полезна тази информация?

Благодарим ви за обратната връзка!

Благодарим ви за вашата обратна връзка. Изглежда, че ще бъде полезно да ви свържем с един от нашите агенти по поддръжката на Office.

×