This article applies to Microsoft Dynamics NAV for the Spanish (es) language locale.
Symptoms
The Trial Balance report (6) displays incorrectly with the following conditions are true in the Spanish version of Microsoft Dynamics NAV 2009:
-
The Include Opening Entries check box in the report is selected.
-
The report is filtered by global dimension 1 or global dimension 2 with a blank value.
This problem occurs in the following products:
-
The Spanish version of Microsoft Dynamics NAV 2009 R2
-
The Spanish version of Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)
Resolution
Hotfix information
A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.
Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.
Installation information
Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.
Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.
To implement this hotfix, you must have a developer license.
We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
-
The Modify permission for the object that you will be changing.
-
The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.
Note You do not have to have rights to the data stores unless you have to perform data repair.
Code changes
Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:
-
Change the code in the CalcOpenEntries function in the Trial Balance report (6) as follows:
Existing code...
GlAccount3.GET("G/L Account"."No.");
GlAccount3.SETRANGE(GlAccount3."Date Filter",0D,CLOSINGDATE((AccPeriod3."Starting Date" - 1)));
IF GlobalDim1 <> '' THEN
// Delete the following lines.
GlAccount3.SETRANGE("Global Dimension 1 Filter",GlobalDim1);
IF GlobalDim2 <> '' THEN
GlAccount3.SETRANGE("Global Dimension 2 Filter",GlobalDim2);
// End of the lines.
GlAccount3.CALCFIELDS("Additional-Currency Net Change","Net Change");
IF PrintAmountsInAddCurrency THEN BEGIN
IF GlAccount3."Additional-Currency Net Change" > 0 THEN
...Replacement code
...
GlAccount3.GET("G/L Account"."No.");
GlAccount3.SETRANGE(GlAccount3."Date Filter",0D,CLOSINGDATE((AccPeriod3."Starting Date" - 1)));
IF GlobalDim1 <> '' THEN
// Add the following lines.
GlAccount3.SETFILTER("Global Dimension 1 Filter",GlobalDim1);
IF GlobalDim2 <> '' THEN
GlAccount3.SETFILTER("Global Dimension 2 Filter",GlobalDim2);
// End of the lines.
GlAccount3.CALCFIELDS("Additional-Currency Net Change","Net Change");
IF PrintAmountsInAddCurrency THEN BEGIN
IF GlAccount3."Additional-Currency Net Change" > 0 THEN
... -
Change the code in the CalcCloseEntries function in the Trial Balance report (6) as follows:
Existing code...
GlAccount4.GET("G/L Account"."No.");
GlAccount4.SETRANGE(GlAccount4."Date Filter",0D,ToFec);
IF GlobalDim1 <> '' THEN
// Delete the following lines.
GlAccount4.SETRANGE("Global Dimension 1 Filter",GlobalDim1);
IF GlobalDim2 <> '' THEN
GlAccount4.SETRANGE("Global Dimension 2 Filter",GlobalDim2);
// End of the lines.
GlAccount4.CALCFIELDS("Additional-Currency Net Change","Net Change");
IF PrintAmountsInAddCurrency THEN BEGIN
IF GlAccount4."Additional-Currency Net Change" > 0 THEN
...Replacement code
...
GlAccount4.GET("G/L Account"."No.");
GlAccount4.SETRANGE(GlAccount4."Date Filter",0D,ToFec);
IF GlobalDim1 <> '' THEN
// Add the following lines.
GlAccount4.SETFILTER("Global Dimension 1 Filter",GlobalDim1);
IF GlobalDim2 <> '' THEN
GlAccount4.SETFILTER("Global Dimension 2 Filter",GlobalDim2);
// End of the lines.
GlAccount4.CALCFIELDS("Additional-Currency Net Change","Net Change");
IF PrintAmountsInAddCurrency THEN BEGIN
IF GlAccount4."Additional-Currency Net Change" > 0 THEN
... -
Change the code in the CalcCloseEntriesHeading function in the Trial Balance report (6) as follows:
Existing code...
GLAcc.SETFILTER("No.","G/L Account".Totaling);
GLAcc.SETRANGE("Account Type",GLAcc."Account Type"::Posting);
IF GlobalDim1 <> '' THEN
// Delete the following lines.
GLAcc.SETRANGE("Global Dimension 1 Filter",GlobalDim1);
IF GlobalDim2 <> '' THEN
GLAcc.SETRANGE("Global Dimension 2 Filter",GlobalDim2);
// End of the lines.
IF GLAcc.FIND('-') THEN BEGIN
REPEAT
...Replacement code
...
GLAcc.SETFILTER("No.","G/L Account".Totaling);
GLAcc.SETRANGE("Account Type",GLAcc."Account Type"::Posting);
IF GlobalDim1 <> '' THEN
// Add the following lines.
GLAcc.SETFILTER("Global Dimension 1 Filter",GlobalDim1);
IF GlobalDim2 <> '' THEN
GLAcc.SETFILTER("Global Dimension 2 Filter",GlobalDim2);
// End of the lines.
IF GLAcc.FIND('-') THEN BEGIN
REPEAT
... -
Change the code in the CalcOpenEntriesHeading function in the Trial Balance report (6) as follows:
Existing code...
GLAcc.SETFILTER("No.","G/L Account".Totaling);
GLAcc.SETRANGE("Account Type",GLAcc."Account Type"::Posting);
IF GlobalDim1 <> '' THEN
// Delete the following lines.
GLAcc.SETRANGE("Global Dimension 1 Filter",GlobalDim1);
IF GlobalDim2 <> '' THEN
GLAcc.SETRANGE("Global Dimension 2 Filter",GlobalDim2);
// End of the lines.
IF GLAcc.FIND ('-') THEN BEGIN
REPEAT
GLAcc.CALCFIELDS("Additional-Currency Net Change","Net Change");
...Replacement code
...
GLAcc.SETFILTER("No.","G/L Account".Totaling);
GLAcc.SETRANGE("Account Type",GLAcc."Account Type"::Posting);
IF GlobalDim1 <> '' THEN
// Add the following lines.
GLAcc.SETFILTER("Global Dimension 1 Filter",GlobalDim1);
IF GlobalDim2 <> '' THEN
GLAcc.SETFILTER("Global Dimension 2 Filter",GlobalDim2);
// End of the lines.
IF GLAcc.FIND ('-') THEN BEGIN
REPEAT
GLAcc.CALCFIELDS("Additional-Currency Net Change","Net Change");
...
Prerequisites
You must have one of the following products installed to apply this hotfix:
-
The Spanish version of Microsoft Dynamics NAV 2009 R2
-
The Spanish version of Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)
Removal information
You cannot remove this hotfix.
Status
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.
