Windows for Workgroups verze historie

Důležité: Tento článek byl přeložen pomocí software společnosti Microsoft na strojový překlad, ne profesionálním překladatelem. Společnost Microsoft nabízí jak články přeložené překladatelem, tak články přeložené pomocí software na strojový překlad, takže všechny články ve Znalostní databázi (Knowledge Base) jsou dostupné v češtině. Překlad pomocí software na strojový překlad ale není bohužel vždy dokonalý. Obsahuje chyby ve skloňování slov, skladbě vět, nebo gramatice, podobně jako když cizinci dělají chyby při mluvení v češtině. Společnost Microsoft není právně zodpovědná za nepřesnosti, chyby nebo škody vzniklé chybami v překladu, nebo při použití nepřesně přeložených instrukcí v článku zákazníkem. Společnost Microsoft aktualizuje software na strojový překlad, aby byl počet chyb omezen na minimum.

Projděte si také anglickou verzi článku:126746
Tento článek byl archivován. Je nabízen v takovém stavu, v jakém je, a nebude již nadále aktualizován.
3.10 3.11
Windows
kbref kbnetwork kbdisplay
                                SUMMARY                                =======This article lists the version history and features for Microsoft Windowsfor Workgroups versions 3.1 and 3.11.                            MORE INFORMATION                            ================VERSION 3.1===========Date----10/1/92Requirements------------ - MS-DOS 3.3 or later (5.0 or later recommended). - PC with 80286 or higher (386SX or higher required for file and print   sharing). - 3 MB RAM (4 MB recommended) and 386SX or higher for file and print   sharing (enhanced mode). - 2 MB RAM and 80286 or higher without file and print sharing (standard   mode). - One 5.25" or 3.5" high-density disk drive and a hard disk with 9.5 MB   available space (14.5 MB recommended). - VGA, Super VGA, 8514/A, EGA, or video graphics adapter and monitor   compatible with Windows 3.1 (color VGA or better resolution   recommended). - Microsoft Windows-compatible network adapter card and cabling.Options------- - Microsoft Mouse or compatible pointing device (mouse recommended). - Hayes or compatible modem. - Audio board. - CD-ROM drive.Features-------- - Microsoft Windows for Workgroups (WFW) is a self-contained version of   Windows 3.1 that includes all the network software necessary for sharing   files, printers, OLE objects, and DDE data with other WFW-equipped   computers or with Microsoft LAN Manager-compatible network clients or   servers. It contains an improved user interface including configuration   options for use with LAN Manager or NetWare servers, with its own server   functionality available on an Intel 80386-based or higher processor. - Peer-to-peer networking. - Electronic Mail, extensible. - Electronic scheduling. - Enhanced File Manager: Sharing directories, connecting to remote PCs,   new Toolbar, and is extensible. - Enhanced Print Manager: Sharing printers, connecting to remote printers,   and new Toolbar. - Enhanced Control Panel: Network icon. - Clipbook Viewer: Can save and share clipboard clippings. - Tools: Chat, Netwatcher, Winmeter. - NetWare and LAN Manager (and Windows NT) connectivity. - Hearts game. - Unlimited number of nodes per workgroup (response time slows as the   number of PCs in the workgroup increases). - 500-user limit on Microsoft Mail Post Office. - No hardcoded limit to resource sharing, but it is impacted by other   factors such as available memory, protocol usage and hardware.Available Packages (SKUs)------------------------- - WFW (software for one user only). - WFW Add-On for Windows 3.1 users (software for one user only). - WFW Upgrade for Windows 3.0 users (software for one user only). - WFW Network Starter Kit (software and hardware for two users). Hardware   includes 2 Intel EtherExpress 16 network adapters (software   configurable), 2 T-connectors, 2 terminators, 25 feet of RG-58   coaxial cable, WatchMe Second Install Video, and 1 screwdriver. - WFW Network User Kit (software and hardware for one user). Hardware   includes 1 Intel EtherExpress 16 network adapter, 1 T-connector, and 25   feet of RG-58 coaxial cable. - WFW Add-On Network Starter Kit (software and hardware for two Windows   3.1 users). The same as the Network Starter Kit, but packaged   specifically for Windows 3.1 users. A 5-user package is also available. - WFW Add-On Network User Kit (software and hardware for one Windows 3.1   user). The same as the Network User Kit, packaged specifically for   Windows 3.1 users. A 5-user package is also available. - Workgroup Connection. Provides network access for computers that cannot   run WFW. Includes MS-DOS Mail client and NET.EXE pop-up utility.Limitations----------- - No Standalone support--network adapter required. - No ODI support. - No Ghosted Connections option. - NDIS 2 (real-mode) drivers only. - Workgroup Connection and real-mode network is client-only.VERSION 3.11============Date----11/1/93Requirements------------ - MS-DOS 3.3 or later (6.2 or later recommended). - PC with 386SX or higher processor. - 3 MB RAM; 4 MB recommended (with no network installed, requires only   2 MB). - One 5.25" or 3.5" high-density, or 3.5" low-density disk drive. - Hard disk drive with 10.5 MB available space (15.5 MB recommended). - VGA, Super VGA, 8514/A, or video graphics adapter and monitor   compatible with Windows 3.1 (color VGA or better resolution monitor   recommended). - For fax capability: Class 1, Class 2, or Communications Application   Specification (CAS) modem required (only Class 1 modems will support   binary file transfer). - Microsoft Windows-compatible network adapter card and cabling. NOTE: No   network hardware (network adapter card and cabling) is required if you   want to run WFW with networking turned off.Options------- - Microsoft Mouse or compatible pointing device (mouse recommended). - Hayes or compatible modem. - Audio board. - CD-ROM drive.Changes and New Features------------------------Microsoft Windows for Workgroups (WFW) version 3.11 contains all of thefeatures included in version 3.1 plus the following features:Network Features: - NDIS 3.0-specification network drivers: Protect-mode drivers, installed   as VXDs, using no conventional memory. - NWLink (and NWNBLink): 32-bit protect-mode protocol for the IPX/SPX   transport. Routable. NWNBLink adds a NetBIOS layer. - Novell NetWare ODI connectivity. Full support for IPXODI, monolithic   IPX, and MSIPX (from WFW 3.1). - Universal Client Support. Can be configured using Windows network   drivers to be a client only for all of the networks supported with   Windows 3.1. - ADMINCFG: A utility for network administrators. Configures security and   WFW 3.11 network settings for individual WFW 3.11 workstations remotely.   Documented primarily in the Windows Resource Kit. Allows the disabling   of file sharing, print sharing, and network DDE sharing. - Remote Access Service (RAS). Client software for dialing into a RAS   server on a Windows NT or LAN Manager server. A Point-to-Point server   for WFW computers was made available via download later. When a client   dials into a Windows NT or LAN Manager RAS server, he or she has full   connectivity into the network. If a client dials into the WFW Point-to-   Point RAS server, he or she has connectivity to that computer only. - Real Mode Server for Workgroup Add-On for MS-DOS. Allows 8088/8086-based   computers (and higher) to share their resources (usually as print   servers). NOTE: The real-mode server is available only in Workgroup Add-   On for MS-DOS.Non-Network Features: - No Network option. WFW can be installed with no network support, much   like Windows 3.1. Also, WFW 3.11 can be invoked without network   components (with the WIN /N command) even though installed for a   network. - Performance Enhancements (VFAT and VCACHE). WFW 3.11 includes VFAT, a   32-bit file system that processes INT21h calls for file I/O on local   disk volumes in protect mode. WFW 3.11 also includes a unified protect-   mode cache, VCACHE, for both network files accessed by the network   redirector and local files accessed through VFAT. - Microsoft At Work PC-Fax. Allows workstations to share fax modems to   send and receive fax messages using the Microsoft Mail MAPI engine. - Enhanced Communication Architecture. The architecture of the   communications interface is more modular. Its components are COMM.DRV,   *VCD, VCOMM.386, SERIAL.386, and LPT.386. With this new modular design,   vendors can write device-specific drivers for serial or LPT ports to   interface with VCOMM.386. It uses the 32-bit interface directly with   VCOMM.386. - New troubleshooting switches: WIN /D:C turns off 32-bit file access.   WIN /D:T skips the *.386 drivers in the [386Enh] section of the   SYSTEM.INI file.Available Packages (SKUs)------------------------- - Windows for Workgroups 3.11--full retail version (also used to upgrade   over Windows 2.x and 3.0). - Workgroup Add-On for Microsoft Windows--upgrade over Windows 3.1 or WFW   3.1 only. - Workgroup Add-On for MS-DOS--full retail version (also used to upgrade   over Workgroup Connection 1.0).Limitations----------- - Real-mode server capabilities available only in Workgroup Add-On for   MS-DOS, not in WFW 3.11. - VCACHE caches only local and network hard disks (no CD-ROM or floppy   drives). - Standard mode not supported.		
3.10 3.11 data změny

Upozornění: Tento článek je přeložený automaticky

Vlastnosti

ID článku: 126746 - Poslední kontrola: 12/04/2015 11:07:01 - Revize: 2.0

Microsoft Windows for Workgroups 3.1, Microsoft Windows for Workgroups 3.11, Microsoft Workgroup Add-On for MS-DOS 3.11

  • kbnosurvey kbarchive kbmt KB126746 KbMtcs
Váš názor