Přihlásit se pomocí účtu Microsoft
Přihlaste se nebo si vytvořte účet.
Dobrý den,
Vyberte jiný účet.
Máte více účtů.
Zvolte účet, pomocí kterého se chcete přihlásit.
Angličtina
Omlouváme se, ale tento článek není dostupný ve vašem jazyce.

This article applies to Microsoft Dynamics NAV for the Italian (it) language locale.

Symptoms

Assume that you create a customer bill which has more than one occurrence for a customer invoice in the Italian version of Microsoft Dynamics NAV. When you try to post a payment for one of the occurrences, you receive the following error message:

Bank Receipt Issued must be No in Cust. Ledger Entry Entry No. ='entry number'.



This problem occurs in the following products:

  • The Italian version of Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

  • The Italian version of Microsoft Dynamics NAV 5.0 Service Pack 1 (SP1)

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:

  • The Modify permission for the object that you will be changing.

  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.



Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:

  1. Change the code in the ApplyCustLedgEntry function in the Gen. Jnl.-Post Line codeunit (12) as follow:
    Existing code

    ...
    IF (GenJnlLine."Applies-to Occurrence No." = 0) AND
    (OldCustLedgEntry.COUNT=1)
    THEN

    // Delete the following lines.
    GenJnlLine."Applies-to Occurrence No." := 1
    ELSE
    // End of the lines.

    OldCustLedgEntry.SETRANGE("Document Occurrence",GenJnlLine."Applies-to Occurrence No.");
    OldCustLedgEntry.SETRANGE(Open,TRUE);
    ...

    Replacement code

    ...
    IF (GenJnlLine."Applies-to Occurrence No." = 0) AND
    (OldCustLedgEntry.COUNT=1)
    THEN

    // Add the following lines.
    GenJnlLine."Applies-to Occurrence No." := 1;
    IF (GenJnlLine."Applies-to Occurrence No." <> 0) THEN
    // End of the lines.

    OldVendLedgEntry.SETRANGE("Document Occurrence",GenJnlLine."Applies-to Occurrence No.");
    OldCustLedgEntry.SETRANGE(Open,TRUE);
    ...
  2. Change the code in the ApplyVendLedgEntry function in the Gen. Jnl.-Post Line codeunit (12) as follow:
    Existing code

    ...
    IF (GenJnlLine."Applies-to Occurrence No." = 0) AND
    (OldVendLedgEntry.COUNT=1)
    THEN

    // Delete the following lines.
    GenJnlLine."Applies-to Occurrence No." := 1
    ELSE
    // End of the lines.

    OldVendLedgEntry.SETRANGE("Document Occurrence",GenJnlLine."Applies-to Occurrence No.");
    OldVendLedgEntry.SETRANGE(Open,TRUE);
    ...

    Replacement code

    ...
    IF (GenJnlLine."Applies-to Occurrence No." = 0) AND
    (OldVendLedgEntry.COUNT=1)
    THEN

    // Add the following lines.
    GenJnlLine."Applies-to Occurrence No." := 1;
    IF (GenJnlLine."Applies-to Occurrence No." <> 0) THEN
    // End of the lines.

    OldVendLedgEntry.SETRANGE("Document Occurrence",GenJnlLine."Applies-to Occurrence No.");
    OldVendLedgEntry.SETRANGE(Open,TRUE);
    ...
  3. Change the code in the OnRun trigger in the Sales-Post codeunit (80) as follow:
    Existing code

    ...
    IF SalesHeader."Currency Code" = '' THEN
    GenJnlLine."Currency Factor" := 1
    ELSE
    GenJnlLine."Currency Factor" := SalesHeader."Currency Factor";
    GenJnlLine."Applies-to Doc. Type" := GenJnlLineDocType;
    GenJnlLine."Applies-to Doc. No." := GenJnlLineDocNo;

    // Delete the following line.
    GenJnlLine."Applies-to Occurrence No." := 1;

    GenJnlLine."Source Type" := GenJnlLine."Source Type"::Customer;
    ...

    Replacement code

    ...
    IF SalesHeader."Currency Code" = '' THEN
    GenJnlLine."Currency Factor" := 1
    ELSE
    GenJnlLine."Currency Factor" := SalesHeader."Currency Factor";
    GenJnlLine."Applies-to Doc. Type" := GenJnlLineDocType;
    GenJnlLine."Applies-to Doc. No." := GenJnlLineDocNo;

    // Add the following line.
    GenJnlLine."Applies-to Occurrence No." := 0;

    GenJnlLine."Source Type" := GenJnlLine."Source Type"::Customer;
    ...
  4. Change the code in the OnRun trigger in the Purch.-Post codeunit (90) as follow:
    Existing code

    ...
    IF PurchHeader."Currency Code" = '' THEN
    GenJnlLine."Currency Factor" := 1
    ELSE
    GenJnlLine."Currency Factor" := PurchHeader."Currency Factor";
    GenJnlLine."Applies-to Doc. Type" := GenJnlLineDocType;
    GenJnlLine."Applies-to Doc. No." := GenJnlLineDocNo;

    // Delete the following line.
    GenJnlLine."Applies-to Occurrence No." := 1;

    GenJnlLine."Source Type" := GenJnlLine."Source Type"::Vendor;
    ...

    Replacement code

    ...
    IF PurchHeader."Currency Code" = '' THEN
    GenJnlLine."Currency Factor" := 1
    ELSE
    GenJnlLine."Currency Factor" := PurchHeader."Currency Factor";
    GenJnlLine."Applies-to Doc. Type" := GenJnlLineDocType;
    GenJnlLine."Applies-to Doc. No." := GenJnlLineDocNo;

    // Add the following line.
    GenJnlLine."Applies-to Occurrence No." := 0;

    GenJnlLine."Source Type" := GenJnlLine."Source Type"::Vendor;
    ...

Prerequisites

You must have the one of the following products installed to apply this hotfix:

  • The Italian version of Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

  • The Italian version of Microsoft Dynamics NAV 5.0 Service Pack 1 (SP1)

Removal information

You cannot remove this hotfix.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Potřebujete další pomoc?

Chcete další možnosti?

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Byly tyto informace užitečné?

Co ovlivnilo váš názor?
Po stisknutí tlačítka pro odeslání se vaše zpětná vazba použije k vylepšování produktů a služeb Microsoftu. Váš správce IT bude moci tato data shromažďovat. Prohlášení o zásadách ochrany osobních údajů.

Děkujeme vám za zpětnou vazbu.

×