Sie sind zurzeit offline. Es wird auf die erneute Herstellung einer Internetverbindung gewartet.

Windows 98 Zweite Ausgabe Updates Setup.txt-Datei

Wichtig: Dieser Artikel wurde maschinell übersetzt und wird dann möglicherweise mithilfe des Community Translation Framework (CTF) von Mitgliedern unserer Microsoft Community nachbearbeitet. Weitere Informationen zu CTF finden Sie unter

Den englischen Originalartikel können Sie über folgenden Link abrufen: 232681
Disclaimer zu nicht mehr gepflegten KB-Inhalten
Dieser Artikel wurde für Produkte verfasst, für die Microsoft keinen Support mehr anbietet. Der Artikel wird deshalb in der vorliegenden Form bereitgestellt und nicht mehr weiter aktualisiert.
Dieser Artikel enthält eine Kopie der Datei Setup.txt mit Windows 98 Second Edition-Updates enthalten.
Weitere Informationen
------------------------------------------  Microsoft Windows 98 Second Edition           README for Setup      Special UPDATES Version             April 1999------------------------------------------(c) Copyright Microsoft Corporation, 1999This document provides complementary or late-breakinginformation to supplement the Microsoft Windows 98Second Edition documentation.CONTENTS1.  INSTALLATION NOTES *IMPORTANT*2.  QUICK TIPS FOR AN ERROR-FREE SETUP3.  TROUBLESHOOTING SETUP ISSUES4.  FINDING HARD-DISK PROBLEMS DURING SETUP USING SCANDISK 5.  ANTI-VIRUS SOFTWARE6.  CAB FILE ERRORS DURING WINDOWS 98 SECOND EDITION SETUP7.  REMOVING WINDOWS 98 SECOND EDITION FROM YOUR SYSTEM8.  INSTALLING WINDOWS 98 SECOND EDITION WITH WINDOWS NT9.  SETUP ERROR MESSAGES10. HARDWARE NOTES11. MEMORY MANAGERS12. DISK-CACHE PROGRAMS13. USING TERMINATE-AND-STAY-RESIDENT (TSR) PROGRAMS1. INSTALLATION NOTES *IMPORTANT*=================================The Windows 98 Second Edition Updates CD is intended as aWindows 98 upgrade only. You can install it only over anexisting version of Windows 98. Because of this limitation,you should be aware of several issues.MS-DOS installations are not supported--------------------------------------Because this version will only upgrade over Windows 98,installations from MS-DOS have been disabled. This means youmust be able to boot your current version of Windows 98 and runSetup from there.Cannot reinstall entire OS from the Updates CD----------------------------------------------If you want to do a clean installation to a new directory ornew drive letter, you must first install the originalWindows 98 released version, and then apply the Updates CD.You can not reinstall the entire Windows 98 Second Editiondirectly from the Updates CD. You should always keep youroriginal Windows 98 CD-ROM (or floppy disks) in case you mustreinstall.Troubleshooting failed installations------------------------------------If Setup fails part-way through installation, you may be leftwith a non-functioning Windows 98 system. If you cannot bootback into Windows 98, you will not be able to run Setup againfrom the Updates CD. This is why it is very important to shutdown all running programs and any extra items running in thesystem tray or taskbar, and to disable all anti-virus or scheduledtasks that may interfere with Setup. In the event of this typeof failure, you may need to uninstall back to Windows 98, orreinstall Windows 98 again and then try to upgrade again.If Setup does fail and you are unable to continue, see section 3,TROUBLESHOOTING SETUP ISSUES, for more information on how to recover from these situations.Disk-space requirements -----------------------Because many factors go into calculating the amount of free diskspace required for Windows 98 Second Edition, these figures areonly estimates based on typical Windows 98 Second Editioninstallations.A typical installation requires approximately 145 MB of free hard-disk space, but can range between 140 MB to 245 MB, depending onyour system configuration and the options you choose to install.For broadcast reception, you need a compatible TV tuner card, a Pentium or higher microprocessor, and an additional 65 MB of hard-disk space.If you are installing Windows 98 Second Edition to a drive otherthan C, Setup can require up to 35 MB of free disk space on driveC for the system and log files created during Setup.Uninstall---------We recommend creating uninstall information before upgrading. Todo this, select the Save Your System Files option during Setup.This will allow you to uninstall Windows 98 Second Edition ifyou have problems. The uninstall information can require up to110 MB or more depending upon your system configuration. However,you cannot do this if your current Windows 98 installation is ona compressed drive.2. QUICK TIPS FOR AN ERROR-FREE SETUP=====================================Disable all anti-virus programs running on your system. Ifthese utilities are running during Setup, your system may stopresponding. NOTE: Some systems have anti-virus capabilities built in. Ifthis option is left enabled in BIOS/CMOS settings, you may receivea warning about "virus-like activity" or "Master Boot Record"changes. You must allow these changes to take place for Setup tocomplete successfully. See your anti-virus software documentationfor more information.Run ScanDisk to check and fix any problems with your hard disk(s).Close all running programs. This includes disabling any screen savers, advanced power management settings, scheduled tasks, and any other programs that may cause Setup to stop responding. See "Performing a clean boot" in the next section.3. TROUBLESHOOTING SETUP ISSUES===============================Performing a clean boot-----------------------Third-party device drivers, utilities, or other programs can prevent a successful installation. Clean-booting your system can fix many of these problems. Windows 98 provides a tool forautomating many of the steps required to clean-boot a system.1. Click Start, click Run, and then type              msconfig2. Click the Selective startup button.3. Clear all the check boxes and click OK.4. When prompted to restart, click Yes.5. When Windows 98 reboots, you should be in a clean environment   to run Setup.If Setup fails and you cannot boot into Windows 98--------------------------------------------------If Windows 98 Second Edition Setup fails when upgrading overWindows 98 and you cannot boot back into your original Windows98 installation, you should try the following:1. Restart your computer and hold the CTRL key until you see the    Windows 98 boot menu.2. Choose Safe mode. If Safe mode works, see "Performing a clean    boot" in section 3, TROUBLESHOOTING SETUP ISSUES.3. Restart when prompted by Msconfig.4. If Windows 98 boots, try running Setup again.Reinstall your original version of Windows 98 over itself.This may allow you to try the Update CD again. We recommendperforming a clean boot before running Setup again. This mayresolve the problem that caused Setup to fail the first time.Uninstall Windows 98 Second Edition from MS-DOS. If you savedyour system files during the initial Setup wizard, you canuninstall the failed Setup back to your original Windows 98 system.To uninstall Windows 98 Second Edition from MS-DOS, follow thesesteps:1. Restart your computer and hold the CTRL key until you see the    Windows 98 boot menu.2. Choose Command Prompt Only.3. At the prompt, type               Uninstal4. After Uninstall has completed, restart your computer and allowWindows 98 to boot again. Before you try the upgrade again, see"Performing a clean boot" in section 3, TROUBLESHOOTING SETUP ISSUES.NOTE: For more information on uninstalling Windows 98, see section 7, REMOVING WINDOWS 98 SECOND EDITION FROM YOUR SYSTEM.4. FINDING HARD-DISK PROBLEMS DURING SETUP USING SCANDISK=========================================================The version of ScanDisk that runs during Windows 98 Second EditionSetup checks for errors but does not fix them. Setup cannot continueuntil errors are fixed. To do this, quit Setup and run ScanDiskfrom Windows 98 or MS-DOS. The below information has instructionsabout using ScanDisk to fix various problems.Fixing hard-disk problems-------------------------If a message appears during Setup stating that you must runScanDisk to fix problems on your hard disk, follow these steps:1. Quit Setup.2. Click Start, point to Programs, point to Accessories, point to   System Tools, and then click ScanDisk.3. Check your hard disks and host drives for errors and repair any   problems. Be sure to do a complete surface scan on all your   drives, or Setup may still find errors.If running ScanDisk from Windows 98 does not fix your hard-diskproblems, try running ScanDisk from MS-DOS:1. Click Start, click Shut Down, and then click Restart in   MS-DOS mode.2. At the MS-DOS command prompt, type:             scandisk.exe /all3. Follow the on-screen instructions and fix any problems that   ScanDisk finds.4. Restart Windows 98 and run Setup again.If you have other problems while Setup is running ScanDisk, youcan bypass ScanDisk in Setup by running Setup with the /IS option.To do this, type:              setup /isScanDisk reports out-of-memory------------------------------Some larger hard disks may be formatted in a way that does notallow ScanDisk to check them. Such hard disks are larger than18 GB and are usually in systems provided by OEMs.In such a case, you should run Setup with the /IS and /IQ switchesto bypass both ScanDisk and the crosslink file check by typing:                  Setup /is /iqNOTE: Bypassing ScanDisk during Setup is not recommended becausethere may be problems with your hard disk that could causeWindows 98 Second Edition not to install or run correctly.5. ANTI-VIRUS SOFTWARE======================Make sure that no anti-virus program is running while you setupWindows 98 Second Edition. If the program is a terminate-and-stay-resident program, remove any references to it in your Autoexec.bat,Config.sys, and Win.ini files.If your BIOS has built-in virus protection, disable it beforerunning Setup. To do this, you must use the CMOS setup programfor your BIOS. For more information, see the documentation foryour computer.The below information discusses specific anti-virus programs.CMOS/BIOS-enabled virus protection:Some systems come with virus protection built-in. If this isleft enabled, you may be warned with "Virus-like Activity" or"Master Boot Record Changed" messages. You must allow thesechanges to take place. If you choose to restore the previoussettings, your system may no longer boot.Norton AntiVirus:If Norton AntiVirus is installed, you may see the following warningat the end of the initial file-copy procedure:      Application Wininst0.400\Suwin.exe is     attempting to update the Master Boot RecordChoose Continue (C) to allow Setup to finish. If you do not allowthese changes to take place, Setup may stop responding.Dr. Solomon's Anti-Virus:If you are running Dr. Solomon's Anti-Virus utility, you mayreceive a blue-screen fatal exception error in Ios.vxd while tryingto create a Startup disk during Setup. You should click Cancel onthe Startup disk screen when the progress bar is at 20%. This willallow Setup to continue. Look for an update to Dr. Solomon'sAnti-Virus software on their Web site to resolve this issue.6. CAB FILE ERRORS DURING WINDOWS 98 SECOND EDITION SETUP=========================================================When you try to install Windows 98 Second Edition or a componentthat requires copying files from the original Windows disks orCD-ROM, you may receive one of the following messages: - "Setup has detected the following decoding error:   Could not decode this setup (.CAB) file. Setup will   attempt to recover from this situation, click OK to   continue." - "Setup cannot copy all of the files from your Windows   98 CD. Clean the Windows 98 CD with a soft cloth,   return it to the CD-ROM drive, and then click OK. If   you receive this message again, read the CAB Errors   section of the Setup.txt file. This file is in the   Win98 directory of your Windows 98 CD."These errors can occur for any of the following reasons: - Your Windows 98 CD-ROM may be damaged, dirty from smudges or   fingerprints, or may be scratched. - Your CD-ROM drive is not functioning properly. The CD-ROM may   vibrate too much for the laser to accurately read the data. - Your computer is over-clocked. Extracting files from the   Windows 98 Second Edition cabinet files is memory-intensive.   If your computer is over-clocked beyond the default settings,   it can contribute to decoding errors. Computers that are not   over-clocked but have a cooling problem can also experience   decoding errors. - Your computer has bad or mismatched RAM or cache. For example,   you are using EDO and non-EDO RAM, or you are using different   RAM speeds. Even if Windows 98 seems to run without problems,   the additional stress of extracting files and accessing the disk   may contribute to decoding errors. - Your computer has Bus Mastering or Ultra DMA enabled in the BIOS   and in Device Manager. The data may be moving too quickly for   the system to keep up. - You are using a third-party memory manager. - There is a virus on your computer.To resolve such error messages, follow these steps: 1. Remove the CD-ROM from the CD-ROM drive, rotate it one-quarter   to one-half a turn, reinsert the CD-ROM into the drive, and then   click OK.2. Remove the CD-ROM from the CD-ROM drive. Clean the CD-ROM with   a soft cloth, reinsert it into the drive, and then click OK.3. Check your computer for a virus using virus-detection software.4. On one of your hard drives, create an empty folder and name it   "W98flat". Copy the contents of the Win98 folder on the CD-ROM to   the W98flat folder. If you are unable to copy the contents of the   Win98 folder on the CD-ROM to you hard disk, the CD-ROM may be   damaged.5. If you are still receiving CAB errors in Windows 98, you can   manually extract all the Setup files from the Windows 98 Second   Edition CD-ROM to your hard disk and run Setup from there. It   requires approximately 300 MB of free hard-disk space to extract   the Windows 98 files. You can use the Ext.exe utility to extract   the Windows 98 files. This utility is located on the Windows 98   Startup disk and in the \Oldmsdos folder on the Windows 98 CD-ROM.   To manually extract the Windows 98 files, follow these steps:   a. Insert the Windows 98 Startup disk into the floppy      disk drive, and then restart your computer.   b. At the command prompt, type:                   ext   c. When prompted for the location of the cabinet files,      type the path to the W98flat folder that you created in      step 4 above.   d. When prompted for the files to extract, type:                                        *.*   e. When prompted for the location where the files are to be      extracted, type the path to the W98flat folder.       NOTE: This does not extract the files in the      and cabinet files.   f. After all the files have been extracted, reboot into       Windows 98 and run Setup from the W98flat folder on your       hard disk.6. If the above steps do not fix the problem, you can try to slow   down your computer by changing your computer's CMOS settings.   Bus mastering, external/internal cache, RAM settings/timings,   and other settings contribute to the speed at which your computer   runs. For information about how to change these settings, consult   the documentation for your computer.7. REMOVING WINDOWS 98 SECOND EDITION FROM YOUR SYSTEM======================================================Saving System Files:Windows 98 Second Edition Setup offers the option of backing upthe previous version of Windows in case you need to uninstallWindows 98 Second Edition. To enable this option, select the SaveYour System Files option when prompted during Setup. Setup willthen create the following hidden files necessary to uninstall backto Windows 98:-W98undo.dat-W98undo.ini-Winlfn.iniNOTE: Deleting these files will prevent Windows 98 Second Editionfrom being uninstalled.If your current Windows installation is on a compressed drive,you will not be able to uninstall Windows 98 Second Edition andSetup will not prompt you to Save System Files.NOTE: You must save the files needed to uninstall Windows 98 SecondEdition on a local hard drive. You cannot save the files on anetwork drive or a floppy disk. As long as two or more drives haveadequate free space, you can select the drive on which you want tosave the files.There are also several actions that can prevent Windows 98 SecondEdition from being uninstalled after Setup is complete. The followingactions will cause the uninstall information to be removed fromyour system:-Converting your hard disk to FAT32-Compressing your hard disk with DriveSpaceNOTE: These utilities should warn you that the uninstall informationwill be lost before they perform conversion or compression.Removing Windows 98 Second Edition:To remove Windows 98 Second Edition and completely restore yoursystem to Windows 98:1. Click Start, point to Settings, and then click Control Panel.2. Double-click Add/Remove Programs.3. On the Install/Uninstall tab, click Uninstall Windows 98 Second   Edition, and then click Add/Remove.NOTE: UNINSTAL needs to shut down Windows 98 Second Edition. Ifthis causes a problem, restart your computer and press the CTRLkey until you see the Windows 98 Second Edition boot menu. Thenclick Command Prompt Only and run UNINSTAL from the command prompt.If Setup did not complete successfully and you want to restore yourprevious version of Windows 98, you can run UNINSTAL from the\Windows\Command directory on your hard disk.If you saved your files on a drive other than C, you can use the/w option to specify the drive where the files are located. Forexample:        uninstal /w e:where e: is the drive containing your previous system files.If Windows 98 Second Edition is running and you want to remove the uninstall files to free disk space, follow these steps:1. Click Start, point to Settings, and then click Control Panel.2. Double-click Add/Remove Programs.3. On the Install/Uninstall tab, click Remove Windows 98 system    files (Uninstall Info).You can no longer remove Windows 98 Second Edition.8. INSTALLING WINDOWS 98 SECOND EDITION WITH WINDOWS NT=======================================================You cannot install Windows 98 Second Edition over any version ofWindows NT, but they can exist together on a single system. However,for compatibility it is recommended that you install each to aseparate hard disk or partition. If Windows NT is already installed, Windows 98 Second Edition Setup will add itself to the Windows NT bootmenu to allow the user to multi-boot between Windows 98 Second Editionand Windows NT.If you can no longer boot Windows NT, you should boot from theWindows NT recovery disks and choose the Repair option to restorethe Windows NT boot files.When installing Windows 98 Second Edition on a system with drivescreated with Windows NT, you may receive the following error:"Setup has detected that your hard disk has a 64K-cluster FAT partition. Because ScanDisk does not work on disks withthis cluster size, Setup cannot continue. To complete Setup,you must repartition your hard disk, format the partition witha FAT file system that has a cluster size of 32K or less, andthen restart Setup."You can avoid this problem and bypass ScanDisk by runningSetup with the /is parameter. To do this, type:              Setup /is 9. SETUP ERROR MESSAGES=======================This section lists specific messages that you may encounter duringSetup and provides information about what to do.Message SU0018:"Setup cannot create files on your startup drive and cannot set upWindows 98. There may be too many files in the root directory of yourstartup drive, or your startup drive letter may have been remapped."The root folder of a drive holds a maximum of 512 entries (files orfolders). This message indicates that Setup has detected too manydirectory entries in the root folder of your computer, and Setupcannot create the files it needs to set up Windows 98 Second Edition.Move or delete some files from the root folder of your drive, andthen run Setup again.Long File Names Error Messages:"Setup has detected that the program, Long File Names, is installedin this directory. Setup cannot continue." If you receive thismessage, you should quit Setup and then remove Long File Namesfrom your computer by using the Uninstall feature in Long FileNames. See "View Software" for more information.Not Enough Disk Space Messages:You can recover disk space by completing any or all of thefollowing steps:-Right-click Recycle Bin, and then click Empty Recycle Bin.-Delete the contents of your Internet browser cache folder.-Delete files with the extensions .bak and .tmp.-Delete unused program folders. Be sure to back-up data first.-Delete the old MS-DOS folder, unless you intend to configure your computer to run both Windows 98 Second Edition and MS-DOS. Be sure you have a start disk that supports access to the CD-ROM drive.-Delete the hidden file Winundo.dat from the previous Windows installation.-Delete the old Windows 3.1 folder, unless you intend to configure your computer to run both Windows 3.1 and Windows 98 Second Edition.Setup Cannot Write to the Temporary Directory:This message may appear because there is insufficient disk spacefor the temporary directory. If space is available on another drive,type the following command to change the temporary directory location:          Setup /T:<drive letter>:\TEMPIf you do not have space available on another drive, free some diskspace and then run Setup again. See the "Not Enough Disk Space"Messages section for files that you can delete.Message SU0010, SU0012, SU0015, or SU0016:If you receive one of these messages during Setup, see section 8,INSTALLING WINDOWS 98 SECOND EDITION WITH WINDOWS NT.Message SU0011:If your hard disk is password-protected, Setup will not completesuccessfully. You must first remove the password protection. Formore information, see the documentation for your computer.Standard Mode Messages:If you get any of the following error messages, remove any memorymanagers (such as EMM386.exe, QEMM, or 386Max) from your Config.sysfile, and then run Setup again.        Standard Mode: Invalid DPMI return.        Standard Mode: Fault in MS-DOS Extender.        Standard Mode: Bad Fault in MS-DOS Extender.        Standard Mode: Unknown stack in fault dispatcher.        Standard Mode: Stack Overflow.NOTE: If you still have problems, add EMM386.EXE back into yourConfig.sys file and exclude all ranges. For example:        device=c:\windows\emm386.exe x=A000-FFFFIf you encounter these messages or if your computer stopsresponding during Setup, turn on double-buffering in SmartDrive.Several SCSI hard drives and some ESDI drives require double-buffering.To turn on double buffering, add the following line to thebeginning of your Config.sys file:        device=c:\windows\smartdrv.exe /double_buffer+where "c:\windows" is the path to your Windows directory.Setup Could Not Back Up Your System Files message:If you see this error message while Setup is saving your systemfiles, you may not have enough disk space, particularly oncompressed disks. Free up space on the drive that you are savingyour system files on (the default drive is C) by removing unneededfiles.Uninstall can require up to 110 MB on many systems. If Setup is notoffering you the choice of saving your system files, you may be verylow on free disk space.Cannot Continue on This System Configuration:If you get this message, you may have an older, incompatible diskpartition. Before you run Setup, you must back-up your data andthen repartition your disk.Message SU0167:A file or folder called Desktop exists on your computer. Rename ormove your current Desktop folder, and then run Setup again.SU99xxxx Messages:SU99 is a prefix that is added to all errors that Setup does nothave a specific error message for. These errors are often causedby low conventional memory. If you have already created a Startupdisk, quit Setup, shut down your computer, insert the Startup disk,and restart the computer.Setup does not have enough conventional memory to check your computer's hard disks -or-Setup could not check the hard drives on your computer:If you receive either of these errors, Setup was unable to runScanDisk to check your hard drives. This can be caused by lowconventional memory, or by errors on your disk that ScanDisk cannotfix when run from Setup. To fix these errors, reboot your systemto MS-DOS mode and run:       ScanDisk /allThen run Setup again. If Setup still fails, reboot to MS-DOS modeand run:       ScanDisk /all /surfaceThis will take a little longer but will ensure your hard disks arein good shape. If Setup still won't continue after running ScanDiskwith these options, you should run:       Setup /isto bypass ScanDisk.NOTE: Bypassing ScanDisk is not recommended and should be used onlyif you are positive your disk(s) contain no errors. If there arestill errors, Setup may fail and your system may no longer boot.10. HARDWARE NOTES==================Plug and play network cards and 16-bit real-mode drivers--------------------------------------------------------When you need to run the 16-bit real-mode driver for your networkinterface card (NIC) (this is common if you use DLC or anotherreal-mode protocol), your Plug and Play card may appear not tofunction because the 16-bit NIC drivers load before Windows 98Second Edition has a chance to turn on Plug and Play cards. Inaddition, some 16-bit NIC drivers do not recognize Plug and Playcards (most NE2000 Plug and Play clones fall into this category).To use your Plug and Play card with a 16-bit NIC driver:1. Run the Softset utility that comes with your Plug and Play card,   and then set the card to non-Plug and Play mode.2. In Control Panel, double-click Network and then remove the   network card.3. In Control Panel, double-click Add New Hardware and follow the   on-screen instructions. Windows 98 Second Edition will detect   your network card.If you change to a 32-bit protected-mode NIC driver in the future,you can run Softset again to turn on Plug and Play for your card.Intel EtherExpress 16 NICs and PCI Computers:Your system may not respond or you may experience initializationproblems if you are using an Intel EtherExpress 16 NIC in a PCIcomputer with certain Diamond Speed Star PCI video cards. Theseproblems are not related to Windows 98 Second Edition; they occuron a variety of operating-system platforms. If you experience otherproblems with your EtherExpress 16 in a PCI computer, replace thecard before you report the problem to Microsoft.If you have one of these video cards, contact your vendor aboutgetting a new video BIOS update:-Diamond Speed Star PCI video card with BIOS version 1.01-Diamond Viper PCI VGA Video Adapter-Diamond Stealth video card, Bios v1.03IBM Thinkpad Model 750x/755x/360x:If you have one of these models (including submodels such as C, CE,CX, CS, and CSE), before you install Windows 98 Second Edition,check the IBM bulletin board or the THINKPAD forum on CompuServefor updated BIOS and/or Mwave drivers for your computer.If you don't upgrade your BIOS, you may have problems if you movethe mouse while your computer is turning suspend mode on or off.Toshiba Computers:The ltmodem driver, version 2.16 and earlier, and the ToshibaWindows 95 Utilities must be upgraded prior to installing Windows98 Second Edition.Contact the following sites for additional information:US - Canada - - & New Zealand: - access the Toshiba Bulletin Board at:+49-941-7807 999 Analog+49-941-7810 500 ISDN 1+49-941-7813 131 ISDN 2For additional support, refer to your User Manual to find thenearest Toshiba support contact.11. MEMORY MANAGERS===================If you have QEMM installed on your computer, it is recommended thatyou remove it from your Config.sys file before you set up Windows98 Second Edition. You can add it back after Windows 98 Second Editionis installed.The following memory managers are incompatible with or may causeproblems with Windows 98 Second Edition. It is recommended that youremove all references to them from your Config.sys and Autoexec.batfiles and use Emm386.exe and Himem.sys, which are provided withWindows 98, to manage memory instead.-Allemm4.sys - All Charge 386 Version 3.1-HPemm386.sys and HPemm486.sys-HPmm.sys - HP Memory Manager (must remove before Setup)-Iemm.sys Memory Manager-Intel(R) Expanded-Memory Emulator (Ilim386.sys)-Maximizer Memory Manager ( Memory Manager (RM386.sys)-QMAPS Memory Manager Version 5.16-UMB PRO Version 1.07NOTE: The documentation for 386MAX recommends that you not setthe EXT parameter below 64. If you set this parameter to 0,Setup will fail.NOTE: If you remove the line containing Rm386.sys from yourConfig.sys file, you may need to install Himem.sys, which comeswith Windows or MS-DOS. You can do this by adding the followingline to your Config.sys file:         device=<path>\himem.sys The <path> is the location of your Windows or MS-DOS files(for example, C:\Windows).12. DISK-CACHE PROGRAMS=======================Before you run Setup, it is recommended that you remove anythird-party disk-cache programs and replace them with Smartdrv.exe,which is provided with Windows 98 Second Edition.If you are running one of the following disk-cache utilities,remove it. In some cases, Setup will remove it for you.-386MAX disk-cache utility (Qcache.exe) (Do not use with SmartDrive.)-Cache.exe disk-cache utility-Cache.sys disk-cache utility-Flash disk-cache utility (Flash.exe) (do not use with SmartDrive.)-Hyperdisk disk-cache utility (do not use with SmartDrive.)-Icache.sys disk-cache utility-IBMcache.sys disk-cache utility-Mace disk-cache utility (Mcache.sys)-Norton Speed Drive Disk utility (SPEEDRV)-Norton Utilities Version 5.0 and 6.1 (DISKREET, NCACHE)-PC-Cache (PC Tools disk-cache utility) (must remove before Setup)-PC-Kwik disk-cache utility (Pc-kwik.exe)-PC_Kwik Disk Accelerator-PC-Kwik Version 1.59 (Pck.exe, Pskscrn.exe, Tools(TM) disk-cache utility ( II disk-cache utility (Fast512.sys) (Do not  use with SmartDrive.)-Super PC-Kwik disk-cache utility (Superpck.exe)13. USING TERMINATE-AND-STAY-RESIDENT (TSR) PROGRAMS====================================================APPEND (MS-DOS):Do not use the APPEND utility with Windows 98 Second Edition. Itprevents Windows and Windows-based programs from creating validWell-Formed-Path (WFP) names for the files they are using. (A WFPis the complete name of a file, including the drive letter andfull path specification, starting from the root directory.)Autocon Version 2.0e, Bootcon Version 1.60, and Boot.sys:These programs enable you to select from different configurationswhen you start your computer. Because Windows 98 Second EditionSetup modifies only the first sections in your Config.sys andAutoexec.bat files, you may need to modify these files manuallyafter Setup. For more information, see the program documentation.Cubit Version 3.01:When you are using Cubit with Windows 98 Second Edition, do notcompress the Windows System folder or any file that is loadedfrom your Config.sys file.Before you upgrade to Windows 98 Second Edition, make sure that theearlier version of Windows is decompressed on your hard disk. Youmay recompress the files after you have successfully set up Windows98 Second Edition.Doubledisk Version 2.5:Windows 98 Second Edition may try to access "phantom" disk drives ifyou use it with Doubledisk. Phantom drives occur when you useDoubledisk to create a compressed drive. For example, if you havedrives A, B, and C on your computer and you use Doubledisk tocreate drive F, Windows 98 Second Edition and MS-DOS recognizedrives D and E as valid drives, even though they do not exist. Youcan use the DRVOFF utility to prevent Windows from recognizingphantom drives. To order a copy of the DRVOFF utility, contactVertisoft.Infinite Disk Version 2.1:Infinite Disk version 2.1 does not work properly with Windows 98Second Edition. Either remove Infinite Disk software from yourcomputer before you run Setup, or contact your software dealerfor a version of Infinite Disk software that is compatible withWindows 98 Second Edition.To remove Infinite Disk from your computer:1. Decompress any compressed files.2. Remove the following lines from your Config.sys    and Autoexec.bat files:         iddrv.sys         idres.exe         protect /c3. Restart your computer, and then run Setup again.NetWare(R) NetBIOS:In many configurations, the NetWare NetBIOS TSR is incompatiblewith Windows 98 Second Edition. In most cases, Setup will detectNetWare NetBIOS and remove the startup command from your computer.However, if you have NetWare NetBIOS set up to start from a locationother than your Autoexec.bat file (for example, from a differentbatch file), Setup cannot detect it. In this case, you need toremove NetWare NetBIOS manually. Windows 98 Second Edition includesan IPX/SPX-compatible protocol that you can use instead of NetBIOS.For information about configuring Windows 98 Second Edition to workwith it, see the file Networks.txt.Newspace Version 1.07:Windows 98 Second Edition is incompatible with this disk-compressionutility.Norton Desktop for Windows (Ep.exe):If the data-recovery program Erase Protect (Ep.exe) is loaded fromyour Autoexec.bat file, disable it when you set up Windows 98Second Edition, especially if you are upgrading over a previousversion of Windows. Because Erase Protect tries to save copies ofall deleted files, you can run out of disk space while running Setup.It is recommended that you run Erase Protect with a permanent swapfile. If you are using a temporary swap file, exclude files thathave a .tmp or .swp extension from erase protection.Norton Disklock versions 3.01 and 3.5 do not work correctly withWindows 98 Second Edition. Either remove this software from yourcomputer before you run Setup, or contact Symantec product supportfor a version of Disklock that is compatible with Windows 98Second Edition.For information about how to remove Disklock from your computer,see the Norton Disklock documentation.PC Tools Deluxe(TM) Version 7.1 (DATAMON):If you load PC Tools DATAMON using the \SENTRY+ option, Setup mayfail if you are low on disk space. Do not use the \SENTRY+ optionwhen you are loading DATAMON.Do not load DATAMON after loading SmartDrive. If DATAMON is loadedafter SmartDrive, your computer may fail. See the PC Toolsdocumentation for information about how to remove DATAMON.PC Tools Deluxe Version 6.0 (DESKTOP):If you try to start PC Tools from the command prompt within Windows,your computer may fail or restart itself. These problems also occurif you use MS-DOS commands from a command prompt within Windows.Version 7.0 of PC Tools may correct these problems. However, do notload DESKTOP from a command prompt if it was loaded before youstarted Windows. If you do, your computer may fail when you quitWindows. It is recommended that you run DESKTOP from its PIF,provided with Windows 98 Second Edition.SUBST (MS-DOS):You may encounter problems with SUBST during Setup, but you cansafely add it back after you have installed Windows 98 Second Edition.UNDELETE:If you are running UNDELETE with the SENTRY option, Setup mayhave problems and you may run out of disk space during Setup.It is recommended that you remove UNDELETE from your Config.sysand Autoexec.bat files before running Setup.NOTE: The SENTRY option creates a hidden directory named Sentry.When you delete a file, UNDELETE moves the file from its currentlocation to the Sentry directory. Before you remove UNDELETE fromyour Config.sys or Autoexec.bat file, free disk space by using theUNDELETE/PURGE command on all drives.If you do not remove Undelete, Setup will disable this command.NOTE: Refer to the file Intl.txt for information aboutinstalling Pan European settings.				

Warnung: Dieser Artikel wurde automatisch übersetzt.


Artikelnummer: 232681 – Letzte Überarbeitung: 07/25/2015 09:22:00 – Revision: 3.0

  • kbinfo kbreadme kbmt KB232681 KbMtde
/html>html>"> rc="">=1&t=">