How to automate Microsoft Word to perform a mail merge using Visual C++ and MFC


This article demonstrates how to create and manipulate a Microsoft Word document using Automation from Microsoft Visual C++ and Microsoft Foundation Classes (MFC).

More Information

This article parallels a Microsoft Knowledge Base article that describes the same process using Microsoft Visual Basic. For more information about automation of Word from Visual Basic, click the following article number to view the article in the Microsoft Knowledge Base:

220607 How to automate Microsoft Word to perform mail merge from Visual Basic

Building the automation sample

  1. Follow steps 1 through 12 in the following Microsoft Knowledge Base article:
    178749 How to create an automation project using MFC and a type library

    Note In step 9, choose the correct type library for the version of Word you are automating. See the references section below for information on finding the correctly type library.
  2. Add the include statement for the header file that was created above (either msword8.h, msword9.h or msword.h) in AutoProjectDlg.cpp after the include statement for stdafx.h. An example for Word 97 would be:
       #include "stdafx.h"
    #include "msword8.h"
  3. Add Automation code to the CAutoProjectDlg::OnRun method so that it appears as shown below:
    void CAutoProjectDlg::OnRun()
    _Application oWord;
    Documents oDocs;
    _Document oDoc;
    Selection oSelection;
    Paragraphs oParagraphs;
    Tables oTables;
    Table oTable;
    Range oRange;
    Columns oColumns;
    Column oColumn;
    Rows oRows;
    Row oRow;

    Cells oCells;
    Cell oCell;
    Shading oShading;
    Hyperlinks oHyperlinks;
    MailMerge oMailMerge;
    MailMergeFields oMailMergeFields;
    COleVariant vtOptional((long)DISP_E_PARAMNOTFOUND,VT_ERROR),
    CString StrToAdd;

    // Create an instance of Word
    if (!oWord.CreateDispatch("Word.Application")) {
    AfxMessageBox("Word failed to start!");
    } else {
    // Set the visible property
    // Add a new document
    oDocs = oWord.GetDocuments();
    oDoc = oDocs.Add(vtOptional,vtOptional);

    // Add the address header

    StrToAdd = "State University\r\nElectrical Engineering " \
    oSelection = oWord.GetSelection();

    oParagraphs = oSelection.GetParagraphs();
    oParagraphs.SetAlignment(1); // 1 = wdAlignParagraphCenter


    oParagraphs.SetAlignment(0); // 0 = wdAlignParagraphLeft
    oMailMerge = oDoc.GetMailMerge();
    oMailMergeFields = oMailMerge.GetFields();
    oSelection.TypeText(" ");

    // Set the paragraph alignment to Right justified
    oParagraphs = oSelection.GetParagraphs();

    oParagraphs.SetAlignment(2); // 2 = wdAlignParagraphRight
    // Insert the current date
    oSelection.InsertDateTime(COleVariant("dddd, MMMM dd, yyyy"),\


    // Reset the justification to Justify

    oParagraphs = oSelection.GetParagraphs();
    oParagraphs.SetAlignment(3); // 3 = wdAlignParagraphJustify

    oSelection.TypeText("Dear ");


    // Add the body of the message
    StrToAdd = "Thank you for your recent request for next " \
    "semester's class schedule for the Electrical " \
    "Engineering Department. Enclosed with this letter " \
    "is a booklet containing all the classes offered " \
    "next semester at State University. Several new " \
    "classes will be offered in the Electrical " \
    "Engineering Department next semester. These " \
    "classes are listed below.";


    // Add a new table with 9 rows and 4 columns
    oRange = oSelection.GetRange();
    oTables = oDoc.GetTables();
    oTable = oTables.Add(oRange,9,4);

    // Set the width of each column
    oColumns = oTable.GetColumns();
    oColumn = oColumns.Item(1);
    oColumn.SetWidth(51.0,0); // 0 = wdAdjustNone
    oColumn = oColumns.Item(2);
    oColumn.SetWidth(198.0,0); // 0 = wdAdjustNone
    oColumn = oColumns.Item(3);
    oColumn.SetWidth(100.0,0); // 0 = wdAdjustNone
    oColumn = oColumns.Item(4);
    oColumn.SetWidth(111.0,0); // 0 = wdAdjustNone

    // Set the shading for row 1 to wdGray25
    oRows = oTable.GetRows();
    oRow = oRows.Item(1);
    oCells = oRow.GetCells();
    oShading = oCells.GetShading();
    oShading.SetBackgroundPatternColorIndex(16); // 16 = wdGray25

    // Turn on BOLD for the first row
    oRange = oRow.GetRange();

    // Set the alignment for cell (1,1) to center
    oCell = oTable.Cell(1,1);
    oRange = oCell.GetRange();
    oParagraphs = oRange.GetParagraphs();
    oParagraphs.SetAlignment(1); // 1 = wdAlignParagraphCenter

    // Fill in the class schedule data
    FillRow(&oTable,1,"Class Number","Class Name",\
    "Class Time","Instructor");
    FillRow(&oTable,2, "EE220", "Introduction to Electronics II", \
    "1:00-2:00 M,W,F", "Dr. Jensen");
    FillRow(&oTable,3, "EE230", "Electromagnetic Field Theory I", \
    "10:00-11:30 T,T", "Dr. Crump");
    FillRow(&oTable,4, "EE300", "Feedback Control Systems", \
    "9:00-10:00 M,W,F", "Dr. Murdy");
    FillRow(&oTable,5, "EE325", "Advanced Digital Design", \
    "9:00-10:30 T,T", "Dr. Alley");
    FillRow(&oTable,6, "EE350", "Advanced Communication Systems", \
    "9:00-10:30 T,T", "Dr. Taylor");
    FillRow(&oTable,7, "EE400", "Advanced Microwave Theory", \
    "1:00-2:30 T,T", "Dr. Lee");
    FillRow(&oTable,8, "EE450", "Plasma Theory", \
    "1:00-2:00 M,W,F", "Dr. Davis");
    FillRow(&oTable,9, "EE500", "Principles of VLSI Design", \
    "3:00-4:00 M,W,F", "Dr. Ellison");

    // Go to the end of the document
    oSelection.GoTo(COleVariant((short)3), // 3 = wdGoToLine
    COleVariant((short)-1),vtOptional,vtOptional); // -1 = wdGoToLast


    // Add closing text
    StrToAdd = "For additional information regarding the " \
    "Department of Electrical Engineering, " \
    "you can visit our website at ";

    // Add a hyperlink to the homepage
    oHyperlinks = oSelection.GetHyperlinks();

    // Finish adding closing text
    StrToAdd = ". Thank you for your interest in the classes " \
    "offered in the Department of Electrical " \
    "Engineering. If you have any other questions, " \
    "please feel free to give us a call at (999) " \
    "555-1212.\r\n\r\n" \
    "Sincerely,\r\n\r\n" \
    "Kathryn M. Hinsch\r\n" \
    "Department of Electrical Engineering\r\n";

    // Perform mail merge
    oMailMerge.SetDestination(0); // 0 = wdSendToNewDocument

    // Close the original form document

  4. Insert the following code above in the code that is given in step 3:
    void InsertLines(Selection *pSelection, int NumLines)
    int iCount;

    // Insert NumLines blank lines
    for (iCount = 1; iCount <= NumLines; iCount++)

    void FillRow(Table *pTable,int Row, CString Text1,
    CString Text2, CString Text3, CString Text4)
    Cell oCell;
    Range oRange;

    // Insert data into the specific cell
    oCell = pTable->Cell(Row,1);
    oRange = oCell.GetRange();
    oCell = pTable->Cell(Row,2);
    oRange = oCell.GetRange();
    oCell = pTable->Cell(Row,3);
    oRange = oCell.GetRange();
    oCell = pTable->Cell(Row,4);
    oRange = oCell.GetRange();


    void CreateMailMergeDataFile(_Application *pApp,_Document *pDoc)
    _Document oDataDoc;
    MailMerge oMailMerge;
    Documents oDocs;
    Tables oTables;
    Table oTable;
    Rows oRows;
    int iCount;
    COleVariant vtOptional((long)DISP_E_PARAMNOTFOUND,VT_ERROR),

    // Create a data source at C:\DataDoc.doc containing the field data
    oMailMerge = pDoc->GetMailMerge();
    oMailMerge.CreateDataSource(COleVariant("C:\\DataDoc.doc"), \
    vtOptional,vtOptional, \
    COleVariant("FirstName, LastName, Address,CityStateZip"),\
    vtOptional, vtOptional,vtOptional,vtOptional,vtOptional);
    // Open the file to insert data
    oDocs = pApp->GetDocuments();
    oDataDoc = oDocs.Open(COleVariant("C:\\DataDoc.doc"), \
    oTables = oDataDoc.GetTables();
    oTable = oTables.Item(1);
    oRows = oTable.GetRows();
    for (iCount=1; iCount<=2; iCount++)

    // Fill in the data
    FillRow(&oTable, 2, "Steve", "DeBroux", \
    "4567 Main Street", "Buffalo, NY 98052");
    FillRow(&oTable, 3, "Jan", "Miksovsky", \
    "1234 5th Street", "Charlotte, NC 98765");
    FillRow(&oTable, 4, "Brian", "Valentine", \
    "12348 78th Street Apt. 214", "Lubbock, TX 25874");
    // Save and close the file
  5. Compile and run your program. Click the Run button, and Microsoft Word should start and display a sample letter. Note that some methods have changed with Word 2000 and Word 2002. For more information on these changes, see the "References" section.


Notes for automating Microsoft Word 2000 and Microsoft Word 2002

Some methods and properties have changed for Microsoft Word 2000 and Microsoft Word 2002. For more information about how to use the sample code in this article together with the Word type library, click the following article number to view the article in the Microsoft Knowledge Base:

224925 Type libraries for Office may change with new release

For more information about Office Automation, visit the Microsoft Office Development support site at:

Αναγνωριστικό άρθρου: 220911 - Τελευταία αναθεώρηση: 23 Μαρ 2009 - Αναθεώρηση: 1