Security update deployment information: April 11, 2017

April 11, 2017 support package deployment tables

Microsoft Windows Deployment Tables

Windows Vista (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file names	For all supported 32-bit editions of Windows Vista: Windows6.0-KB4014652-x86.msu Windows6.0-KB4014793-x86.msu Windows6.0-KB4014794-x86.msu Windows6.0-KB4015067-x86.msu Windows6.0-KB4015068-x86.msu Windows6.0-KB4015195-x86.msu Windows6.0-KB4015380-x86.msu Windows6.0-KB4015383-x86.msu
	For all supported x64-based editions of Windows Vista: Windows6.0-KB4014652-x64.msu Windows6.0-KB4014793-x64.msu Windows6.0-KB4014794-x64.msu Windows6.0-KB4015067-x64.msu Windows6.0-KB4015068-x64.msu Windows6.0-KB4015195-x64.msu Windows6.0-KB4015380-x64.msu Windows6.0-KB4015383-x64.msu
Installation switches	See Microsoft Knowledge Base Article 934307
Restart requirement	You must restart the system after you apply this security update.
Removal information	WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates. Then select from the list of updates.
File information	See Microsoft Knowledge Base Article 4014652 See Microsoft Knowledge Base Article 4014793 See Microsoft Knowledge Base Article 4014794 See Microsoft Knowledge Base Article 4015067 See Microsoft Knowledge Base Article 4015068 See Microsoft Knowledge Base Article 4015195 See Microsoft Knowledge Base Article 4015380 See Microsoft Knowledge Base Article 4015383
Registry key verification	Note This update does not add a registry key to validate its installation.

Windows Server 2008 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file names	For all supported 32-bit editions of Windows Server 2008: Windows6.0-KB4014652-x86.msu Windows6.0-KB4014793-x86.msu Windows6.0-KB4014794-x86.msu Windows6.0-KB4015068-x86.msu Windows6.0-KB4015195-x86.msu Windows6.0-KB4015380-x86.msu Windows6.0-KB4015383-x86.msu Windows6.0-KB4020535-x86.msu
	For all supported x64-based editions of Windows Server 2008: Windows6.0-KB3211308-x64.msu Windows6.0-KB3217841-x64.msu Windows6.0-KB4014652-x64.msu Windows6.0-KB4014793-x64.msu Windows6.0-KB4014794-x64.msu Windows6.0-KB4015067-x64.msu Windows6.0-KB4015068-x64.msu Windows6.0-KB4015195-x64.msu Windows6.0-KB4015380-x64.msu Windows6.0-KB4015383-x64.msu Windows6.0-KB4020535-x64.msu
	For all supported Itanium-based editions of Windows Server 2008: Windows6.0-KB4014652-ia64.msu Windows6.0-KB4014793-ia64.msu Windows6.0-KB4014794-ia64.msu Windows6.0-KB4015067-ia64.msu Windows6.0-KB4015068-ia64.msu Windows6.0-KB4015195-ia64.msu Windows6.0-KB4015380-ia64.msu Windows6.0-KB4015383-ia64.msu Windows6.0-KB4020535-ia64.msu
Installation switches	See Microsoft Knowledge Base Article 3211308 See Microsoft Knowledge Base Article 3217841 See Microsoft Knowledge Base Article 4014652 See Microsoft Knowledge Base Article 4014793 See Microsoft Knowledge Base Article 4014794 See Microsoft Knowledge Base Article 4015068 See Microsoft Knowledge Base Article 4015195 See Microsoft Knowledge Base Article 4015380 See Microsoft Knowledge Base Article 4015383 See Microsoft Knowledge Base Article 4020535
Restart requirement	You must restart the system after you apply this security update.
Removal information	WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates. Then select from the list of updates.
File information	See Microsoft Knowledge Base Article 4015195
Registry key verification	Note This update does not add a registry key to validate its installation.

Internet Explorer Deployment Tables

Windows Vista (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file names	For Internet Explorer 9 for all supported 32-bit editions of Windows Vista: IE9-Windows6.0-KB4015551-x86.msu
	For Internet Explorer 9 for all supported x64-based editions of Windows Vista: IE9-Windows6.0-KB4015551-x64.msu
Installation switches	See Microsoft Knowledge Base Article 934307
Restart requirement	You must restart the system after you apply this security update.
Removal information	WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates. Then select from the list of updates.
File information	See Microsoft Knowledge Base Article 4015551
Registry key verification	Note This update does not add a registry key to validate its installation.

Windows Server 2008 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file names	For Internet Explorer 9 for all supported 32-bit editions of Windows Server 2008: IE9-Windows6.0-KB4015551-x86.msu
	For Internet Explorer 9 for all supported x64-based editions of Windows Server 2008: IE9-Windows6.0-KB4015551-x64.msu
Installation switches	See Microsoft Knowledge Base Article 934307
Restart requirement	You must restart the system after you apply this security update.
Removal information	WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates. Then select from the list of updates.
File information	See Microsoft Knowledge Base Article 4015551
Registry key verification	Note This update does not add a registry key to validate its installation.

Microsoft Office Deployment Tables

Microsoft Office 2007 (all editions) and Other Software

Reference Table

The following table contains the security update information for this software.

Security update file name	For Microsoft Office 2007 Service Pack 3 mso2007-kb3141529-fullfile-x86-glb.exe
	For Microsoft Excel 2007 Service Pack 3: excel2007-kb3191827-fullfile-x86-glb.exe
	For Microsoft OneNote 2007 Service Pack 3: wce2007-kb3191829-fullfile-x86-glb.exe
	For Microsoft Outlook 2007 Service Pack 3 outlook2007-kb3127890-fullfile-x86-glb.exe
	For Microsoft Office Compatibility Pack: xlconv2007-kb3191830-fullfile-x86-glb.exe
Installation switches	See Microsoft Knowledge Base Article 912203
Restart requirement	In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal information	Use the Add or Remove Programs item in Control Panel.
File information	See Microsoft Knowledge Base Article 3141529 See Microsoft Knowledge Base Article 3191827 See Microsoft Knowledge Base Article 3191829 See Microsoft Knowledge Base Article 3127890 See Microsoft Knowledge Base Article 3191830
Registry key verification	Not applicable

Microsoft Office 2010 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file name	For Microsoft Office 2010 Service Pack 2 (32-bit editions): mso2010-kb3141538-fullfile-x86-glb.exe
	For Microsoft Office 2010 Service Pack 2 (64-bit editions) mso2010-kb3141538-fullfile-x64-glb.exe
	For Microsoft Excel 2010 Service Pack 2 (32-bit editions): excel2010-kb3191847-fullfile-x86-glb.exe
	For Microsoft Excel 2010 Service Pack 2 (64-bit editions): excel2010-kb3191847-fullfile-x64-glb.exe
	For Microsoft OneNote 2010 Service Pack 2 (32-bit editions): wce2010-kb2589382-fullfile-x86-glb.exe
	For Microsoft OneNote 2010 Service Pack 2 (64-bit editions) wce2010-kb2589382-fullfile-x64-glb.exe
	For Microsoft Outlook 2010 Service Pack 2 (32-bit editions) outlookloc2010-kb3118388-fullfile-x86-glb.exe
	For Microsoft Outlook 2010 Service Pack 2 (64-bit editions) outlookloc2010-kb3118388-fullfile-x64-glb.exe
Installation switches	See Microsoft Knowledge Base Article 912203
Restart requirement	In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal information	Use the Add or Remove Programs item in Control Panel.
File information	See Microsoft Knowledge Base Article 3141538 See Microsoft Knowledge Base Article 3191847 See Microsoft Knowledge Base Article 2589382 See Microsoft Knowledge Base Article 3118388
Registry key verification	Not applicable

Microsoft Office 2013 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file name	For Microsoft Office 2013 Service Pack 1 (32-bit editions) mso2013-kb3178710-fullfile-x86-glb.exe
	For Microsoft Office 2013 Service Pack 1 (64-bit editions) mso2013-kb3178710-fullfile-x64-glb.exe
	For Microsoft Outlook 2013 Service Pack 1 (32-bit editions): outlook2013-kb3172519-fullfile-x86-glb.exe
	For Microsoft Outlook 2013 Service Pack 1 (64-bit editions): outlook2013-kb3172519-fullfile-x64-glb.exe
Installation switches	See Microsoft Knowledge Base Article 912203
Restart requirement	In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal information	Use the Add or Remove Programs item in Control Panel.
File information	See Microsoft Knowledge Base Article 3178710 See Microsoft Knowledge Base Article 3172519
Registry key verification	Not applicable

Microsoft Office 2013 RT (all editions)

Deployment	The 3178710 update for Microsoft Excel 2013 RT is available via Windows Update.
	The 3172519 update for Microsoft Word 2013 RT is available via Windows Update.
Restart requirement	In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal information	Click Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates. Then select from the list of updates.
File information	See Microsoft Knowledge Base Article 3172542 See Microsoft Knowledge Base Article 3172464

Microsoft Office 2016 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file name	For Microsoft Office 2016 (32-bit edition) msodll302016-kb3178703-fullfile-x86-glb.exe mso2016-kb3178702-fullfile-x86-glb.exe
	For Microsoft Office 2016 (64-bit edition) msodll302016-kb3178703-fullfile-x64-glb.exe mso2016-kb3178702-fullfile-x64-glb.exe
	For Microsoft Outlook 2016 (32-bit edition): outlook2016-kb3178664-fullfile-x86-glb.exe
	For Microsoft Outlook 2016 (64-bit edition): outlook2016-kb3178664-fullfile-x64-glb.exe
Installation switches	See Microsoft Knowledge Base Article 912203
Restart requirement	In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal information	Use the Add or Remove Programs item in Control Panel.
File information	See Microsoft Knowledge Base Article 3178703 See Microsoft Knowledge Base Article 3178702 See Microsoft Knowledge Base Article 3178664
Registry key verification	Not applicable

Microsoft SharePoint Server 2010 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file name	For Excel Services on supported editions of Microsoft SharePoint Server 2010 Service Pack 2: xlsrv2010-kb3191840-fullfile-x64-glb.exe
Installation switches	See Microsoft Knowledge Base Article 912203
Restart requirement	After you install this security update on all SharePoint servers, you must run the PSconfig tool to complete the installation process. You may have to restart the computer after you install this security update. In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message is displayed that advises you to restart the computer. To help reduce the possibility that a restart will be required, stop all affected services and close all applications that may use the affected files before you install this security update. See Why you may be prompted to restart your computer after you install a security update on a Windows-based computer for more information.
Removal information	This security update cannot be removed.
File Information	See Microsoft Knowledge Base Article 3191840
Registry key verification	Not applicable

Microsoft SharePoint Server 2013 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file name	For Excel Services on supported editions of Microsoft SharePoint Server 2013 Service Pack 2: xlsrvloc2013-kb3178724-fullfile-x64-glb.exe
Installation switches	See Microsoft Knowledge Base Article 912203
Restart requirement	In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal information	This security update cannot be removed.
File Information	See Microsoft Knowledge Base Article 3178724
Registry key verification	Not applicable

Microsoft Office Web Apps 2010 (all versions)

Reference Table

The following table contains the security update information for this software.

Security update file name	For Microsoft Excel Web App 2010 Service Pack 2: xlwac2010-kb3101522-fullfile-x64-glb.exe
	For Microsoft Offices Web App 2010 Service Pack 2: wac2010-kb3191845-fullfile-x64-glb.exe
Installation switches	See Microsoft Knowledge Base Article 912203
Restart requirement	In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal information	This security update cannot be removed.
File Information	See Microsoft Knowledge Base Article 3101522 See Microsoft Knowledge Base Article 3191845
Registry key verification	Not applicable

Microsoft Office Web Apps 2013 (all versions)

Reference Table

The following table contains the security update information for this software.

Security update file name	For all supported editions of Microsoft Office Web Apps Server 2013 Service Pack 2: wacserver2013-kb3178725-fullfile-x64-glb.exe
Installation switches	See Microsoft Knowledge Base Article 912203
Restart requirement	In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal information	This security update cannot be removed.
File Information	See Microsoft Knowledge Base Article 3178725
Registry key verification	Not applicable

Office for Mac 2011

Prerequisites

Before you install the Office for Mac 2011 14.7.3 update on your computer, you must uninstall any version of Office for Mac 2011 that's earlier than Office for Mac 2011 14.0.4. Additionally, you must make sure that the computer is running Mac OS X 10.5 or a later version of the Mac OS X operating system.

To verify that the computer meets the operating system version prerequisite, click About This Mac on the Apple menu.

To determine the version of Office for Mac 2011 that's installed on your computer, follow these steps:

1. On the Go menu, click Applications.
2. Start Office for Mac 2011.
3. On the Office menu, click About Office.

The version number of Office for Mac 2011 is displayed in the About Office dialog box.

Installing the Update

Download and install the Microsoft Office for Mac 2011 14.7.3 Update from the Microsoft Download Center.

1. Quit any applications that are running, including all Office applications, Microsoft Messenger, and Office Notifications, because they might interfere with the installation.
2. Make sure that your computer meets the minimum system requirements.
3. Click Download, or click the link for the language version that you want.
4. Follow the instructions on the screen to save the file to your hard disk. If you are using Safari, the downloaded file is saved to the desktop unless you specified a different location in the Preferences dialog box of Safari. To check your preferences, on the Safari menu, click Preferences, and then click General.
5. Double-click the file that you downloaded in step 5 to place the Microsoft Office for Mac 2011 Update volume on your desktop, and then double-click the volume to open it. This step might have been performed for you.
6. In the Microsoft Office for Mac 2011 Update volume window, double-click the Office for Mac 2011 Update application to start the update process, and then follow the instructions on the screen.
7. If the installation finishes successfully, you can remove the update installer from your hard disk. To remove the update installer, first drag the Microsoft Office for Mac 2011 update volume to the Trash, and then drag the file that you downloaded to the Trash.

Note: This update is also available from Microsoft AutoUpdate, an application that can automatically keep your Microsoft software up to date. To use AutoUpdate, open Microsoft Office, and then on the Help menu, click Check for Updates.

Verifying Update Installation

To verify that a security update is installed on an affected system, follow these steps:

1. On the Go menu, click Applications.
2. Start Office for Mac 2011.
3. On the Office menu, click About Office.

The version number of Office for Mac 2011 is displayed in the About Office dialog box. If the Latest Installed Update Version number is 2011 14.7.3, the update has been successfully installed.

Restart Requirement

After you install the Office for Mac 2011 14.7.3 update, we recommend that you restart the computer before you sign in to Office for Mac 2011.

Removing the Update

To uninstall the update drag the Office for Mac 2011 file that you downloaded to the Trash.

Additional Information

If you have technical questions or problems downloading or using this update, see Microsoft for Mac Support to learn about the support options that are available to you.

.NET Deployment Tables – Security Only Release

Windows Vista (all editions)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Vista Service Pack 2 for the Security Only Release.

Security update file names	For Microsoft .NET Framework 2.0 Service Pack 2 on all supported 32-bit editions of Windows Vista: Windows6.0-KB4014571-x86.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Vista: NDP45-KB4014566-x86.exe
	For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Vista: NDP46-KB4014558-x86.exe
	For Microsoft .NET Framework 2.0 Service Pack 2 on all supported x64-based editions of Windows Vista: Windows6.0-KB4014571-x64.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Vista: NDP45-KB4014566-x64.exe
	For Microsoft .NET Framework 4.6 when installed on all supported x64-based editions of Windows Vista: NDP46-KB4014558-x64.exe
Installation switches	For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Update log file	For Microsoft .NET Framework 2.0 Service Pack 2: Not applicable
	For Microsoft .NET Framework 4.5.2: KB4014566__-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014566__.html
	For Microsoft .NET Framework 4.6: KB4014558__-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014558__.html
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, and then click Security. Under Windows Update, click View installed updates. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	For Microsoft .NET Framework 2.0 Service Pack 2 (4014571): This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.
	For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014566 ”ThisVersionInstalled” = “Y”
	For Microsoft .NET Framework 4.6: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014558 "ThisVersionInstalled" = "Y"

Windows Server 2008 (all editions)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 Service Pack 2 for the Security Only Release.

Security update file names	For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2: Windows6.0-KB4014571-x86.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: NDP45-KB4014566-x86.exe
	For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: NDP46-KB4014558-x86.exe
	For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2: Windows6.0-KB4014571-x64.msu
	For Microsoft .NET Framework 4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2: NDP45-KB4014566-x64.exe
	For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows Server 2008 Service Pack 2: NDP46-KB4014558-x64.exe
	For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for Itanium-based Systems Service Pack 2: Windows6.0-KB4014571-ia64.msu
Installation switches	See Microsoft Knowledge Base Article 2844699
Update log file	For Microsoft .NET Framework 2.0 Service Pack 2: Not applicable
	For Microsoft .NET Framework 4.5.2: KB4014566__-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014566__.html
	For Microsoft .NET Framework 4.6: KB4014558__-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014558__.html
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, and then click Security. Under Windows Update, click View installed updates. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	For Microsoft .NET Framework 2.0 Service Pack 2 (4014571): This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.
	For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014566 ”ThisVersionInstalled” = “Y”
	For Microsoft .NET Framework 4.6: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014558 "ThisVersionInstalled" = "Y"

Windows 7 Service Pack 1 (.NET Framework Installations)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 7 Service Pack 1 for the Security Only Release.

Security update file name	For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1: Windows6.1-KB4014573-x86.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP45-KB4014566-x86.exe
	For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014558-x86.exe
	For Microsoft .NET Framework 4.6.2 on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014552-x86.exe
	For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1: Windows6.1-KB4014573-x64.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows 7 Service Pack 1: NDP45-KB4014566-x64.exe
	For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported x64-based editions of Windows 7 Service Pack 1: NDP46-KB4014558-x64.exe
	For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows 7 Service Pack 1: NDP46-KB4014552-x64.exe
Installation switches	See Microsoft Knowledge Base Article 2844699
Update log file	For Microsoft .NET Framework 3.5.1: Not applicable.
	For Microsoft .NET Framework 4.5.2: KB4014566__-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014566__.html
	For Microsoft .NET Framework 4.6/4.6.1: KB4014558__-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014558__.html
	Not applicable
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, click System and Security, and then under Windows Update, click View installed updates. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.
	For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014566 ”ThisVersionInstalled” = “Y”
	For Microsoft .NET Framework 4.6/4.6.1: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014558 "ThisVersionInstalled" = "Y"
	This update does not add a registry key to validate its installation. Use WMI to detect this update.

Windows Server 2008 R2 (.NET Framework Installations)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 R2 for the Security Only Release.

Security update file name	For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: Windows6.1-KB4014573-x64.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: NDP45-KB4014566-x64.exe
	For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014558-x64.exe
	For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: NDP46-KB4014552-x64.exe
	For Microsoft .NET Framework 3.5.1 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1: Windows6.1-KB4014573-ia64.msu
Installation switches	See Microsoft Knowledge Base Article 2844699
Update log file	For Microsoft .NET Framework 3.5.1: Not applicable
	For Microsoft .NET Framework 4.5.2: KB4014566__-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014566__.html
	For Microsoft .NET Framework 4.6/4.6.1: KB4014558__-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014558__.html
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, click System and Security, and then under Windows Update, click View installed updates. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	For Microsoft .NET Framework 3.5.1: This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.
	For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014566 ”ThisVersionInstalled” = “Y”
	For Microsoft .NET Framework 4.6/4.6.1: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014558 "ThisVersionInstalled" = "Y"

Windows 8.1 (.NET Framework Installations)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 8.1 for the Security Only Release.

Security update file name	For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014574-x86.msu
	For Microsoft .NET Framework 4.5.2 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014562-x86.msu
	For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014556-x86.msu
	For Microsoft .NET Framework 4.6.2 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014550-x86.msu
	For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014574-x64.msu
	For Microsoft .NET Framework 4.5.2 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014562-x64.msu
	For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014556-x64.msu
	For Microsoft .NET Framework 4.6.2 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014550-x64.msu
Installation switches	See Microsoft Knowledge Base Article 2844699
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, click System and Security, and then under Windows Update, click View update history. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

Windows Server 2012 and Windows Server 2012 R2 (.NET Framework Installations)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2012 and Windows Server 2012 R2 for the Security Only Release.

Security update file name	For Microsoft .NET Framework 3.5 on Windows Server 2012: Windows8-RT-KB4014572-x64.msu
	For Microsoft .NET Framework 4.5.2 on Windows Server 2012: Windows8-RT-KB4014564-x86.msu
	For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012: Windows8-RT-KB4014560-x64.msu
	For Microsoft .NET Framework 4.6.2 on Windows Server 2012: Windows8-RT-KB4014549-x64.msu
	For Microsoft .NET Framework 3.5 on Windows Server 2012 R2: Windows8.1-KB4014574-x64.msu
	For Microsoft .NET Framework 4.5.2 on Windows Server 2012 R2: Windows8.1-KB4014562-x64.msu
	For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012 R2: Windows8.1-KB4014556-x64.msu
	For Microsoft .NET Framework 4.6.2 on Windows Server 2012 R2: Windows8.1-KB4014550-x64.msu
Installation switches	See Microsoft Knowledge Base Article 2844699
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, click System and Security, and then under Windows Update, click View update history. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

Windows 10 (.NET Framework Installations)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 10.

Security update file name	For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for 32-bit Systems: Windows10.0-KB4015221-x86.msu
	For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for x64-based Systems: Windows10.0-KB4015221-x64.msu
	For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for 32-bit Systems: Windows10.0-KB4015221-x86.msu
	For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for x64-based Systems: Windows10.0-KB4015221-x64.msu
	For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1511: Windows10.0-KB4015219-x86.msu
	For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1511: Windows10.0-KB4015219-x64.msu
	For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1511: Windows10.0-KB4015219-x86.msu
	For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1511: Windows10.0-KB4015219-x64.msu
	For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1607: Windows10.0-KB4015217-x86.msu
	For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1607: Windows10.0-KB4015217-x64.msu
	For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1607: Windows10.0-KB4015217-x86.msu
	For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1607: Windows10.0-KB4015217-x64.msu
	For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1703: Windows10.0-KB4018483-x86.msu
	For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1703: Windows10.0-KB4018483-x64.msu
	For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1703: Windows10.0-KB4018483-x86.msu
	For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1703: Windows10.0-KB4018483-x64.msu
Installation switches	For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Restart requirement	Yes, you must restart your system after you apply this security update.
Removal information	To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates. Then select from the list of updates.
File information	See Microsoft Knowledge Base Article 4015221 See Microsoft Knowledge Base Article 4015219 See Microsoft Knowledge Base Article 4015217 See Microsoft Knowledge Base Article 4018483
Registry key verification	These updates do not add a registry key to validate their installation.

.NET Deployment Tables – Monthly Rollup

Windows Vista (all editions)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Vista Service Pack 2 for the Monthly Rollup.

Security update file names	For Microsoft .NET Framework 2.0 Service Pack 2 on all supported 32-bit editions of Windows Vista: Windows6.0-KB4014561-x86.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Vista: NDP45-KB4014559-x86.exe
	For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Vista: NDP46-KB4014553-x86.exe
	For Microsoft .NET Framework 2.0 Service Pack 2 on all supported x64-based editions of Windows Vista: Windows6.0-KB4014561-x64.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Vista: NDP45-KB4014559-x64.exe
	For Microsoft .NET Framework 4.6 when installed on all supported x64-based editions of Windows Vista: NDP46-KB4014553-x64.exe
Installation switches	For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Update log file	For Microsoft .NET Framework 2.0 Service Pack 2: Not applicable
	For Microsoft .NET Framework 4.5.2: KB4014559__-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014559__.html
	For Microsoft .NET Framework 4.6: KB4014553__-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014553__.html
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, and then click Security. Under Windows Update, click View installed updates. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	For Microsoft .NET Framework 2.0 Service Pack 2 (4014561): This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.
	For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014559 ”ThisVersionInstalled” = “Y”
	For Microsoft .NET Framework 4.6: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014553 "ThisVersionInstalled" = "Y"

Windows Server 2008 (all editions)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 Service Pack 2 for the Monthly Rollup.

Security update file names	For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2: Windows6.0-KB4014561-x86.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: NDP45-KB4014559-x86.exe
	For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: NDP46-KB4014553-x86.exe
	For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2: Windows6.0-KB4014561-x64.msu
	For Microsoft .NET Framework 4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2: NDP45-KB4014559-x64.exe
	For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows Server 2008 Service Pack 2: NDP46-KB4014553-x64.exe
	For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for Itanium-based Systems Service Pack 2: Windows6.0-KB4014561-ia64.msu
Installation switches	See Microsoft Knowledge Base Article 2844699
Update log file	For Microsoft .NET Framework 2.0 Service Pack 2: Not applicable
	For Microsoft .NET Framework 4.5.2: KB4014559__-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014559__.html
	For Microsoft .NET Framework 4.6: KB4014553__-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014553__.html
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, and then click Security. Under Windows Update, click View installed updates. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	For Microsoft .NET Framework 2.0 Service Pack 2 (4014561): This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.
	For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014559 ”ThisVersionInstalled” = “Y”
	For Microsoft .NET Framework 4.6: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014553 "ThisVersionInstalled" = "Y"

Windows 7 Service Pack 1 (.NET Framework Installations)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 7 Service Pack 1 for the Monthly Rollup.

Security update file name	For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1: Windows6.1-KB4014565-x86.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP45-KB4014559-x86.exe
	For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014553-x86.exe
	For Microsoft .NET Framework 4.6.2 on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014547-x86.exe
	For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1: Windows6.1-KB4014565-x64.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows 7 Service Pack 1: NDP45-KB4014559-x64.exe
	For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported x64-based editions of Windows 7 Service Pack 1: NDP46-KB4014553-x64.exe
	For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows 7 Service Pack 1: NDP46-KB4014547-x64.exe
Installation switches	See Microsoft Knowledge Base Article 2844699
Update log file	For Microsoft .NET Framework 3.5.1: Not applicable.
	For Microsoft .NET Framework 4.5.2: KB4014559__-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014559__.html
	For Microsoft .NET Framework 4.6/4.6.1: KB4014553__-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014553__.html
	Not applicable
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, click System and Security, and then under Windows Update, click View installed updates. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.
	For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014559 ”ThisVersionInstalled” = “Y”
	For Microsoft .NET Framework 4.6/4.6.1: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\ KB401455 "ThisVersionInstalled" = "Y"
	This update does not add a registry key to validate its installation. Use WMI to detect this update.

Windows Server 2008 R2 (.NET Framework Installations)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 for the Monthly Rollup.

Security update file name	For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: Windows6.1-KB4014565-x64.msu
	For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: NDP45-KB4014559-x64.exe
	For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014553-x64.exe
	For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: NDP46-KB4014547-x64.exe
	For Microsoft .NET Framework 3.5.1 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1: Windows6.1-KB4014565-ia64.msu
Installation switches	See Microsoft Knowledge Base Article 2844699
Update log file	For Microsoft .NET Framework 3.5.1: Not applicable
	For Microsoft .NET Framework 4.5.2: KB4014559__-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014559__.html
	For Microsoft .NET Framework 4.6/4.6.1: KB4014553__-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014553__.html
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, click System and Security, and then under Windows Update, click View installed updates. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	For Microsoft .NET Framework 3.5.1: This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.
	For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014566 ”ThisVersionInstalled” = “Y”
	For Microsoft .NET Framework 4.6/4.6.1: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014558 "ThisVersionInstalled" = "Y"

Windows 8.1 (.NET Framework Installations)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 8.1 for the Monthly Rollup.

Security update file name	For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014567-x86.msu
	For Microsoft .NET Framework 4.5.2 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014555-x86.msu
	For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014551-x86.msu
	For Microsoft .NET Framework 4.6.2 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014546-x86.msu
	For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014567-x64.msu
	For Microsoft .NET Framework 4.5.2 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014555-x64.msu
	For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014551-x64.msu
	For Microsoft .NET Framework 4.6.2 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014546-x64.msu
Installation switches	See Microsoft Knowledge Base Article 2844699
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, click System and Security, and then under Windows Update, click View update history. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

Windows Server 2012 and Windows Server 2012 R2 (.NET Framework Installations)

Reference Table

Security update file name	For Microsoft .NET Framework 3.5 on Windows Server 2012: Windows8-RT-KB4014563-x64.msu
	For Microsoft .NET Framework 4.5.2 on Windows Server 2012: Windows8-RT-KB4014557-x64.msu
	For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012: Windows8-RT-KB4014548-x64.msu
	For Microsoft .NET Framework 4.6.2 on Windows Server 2012: Windows8-RT-KB4014545-x64.msu
	For Microsoft .NET Framework 3.5 on Windows Server 2012 R2: Windows8.1-KB4014567-x64.msu
	For Microsoft .NET Framework 4.5.2 on Windows Server 2012 R2: Windows8.1-KB4014555-x64.msu
	For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012 R2: Windows8.1-KB4014551-x64.msu
	For Microsoft .NET Framework 4.6.2 on Windows Server 2012 R2: Windows8.1-KB4014546-x64.msu
Installation switches	See Microsoft Knowledge Base Article 2844699
Restart requirement	This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
Removal information	Click Control Panel, click System and Security, and then under Windows Update, click View update history. Then select from the list of updates.
File information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.
Registry key verification	These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

Windows RT 8.1 (all editions)

Reference Table

The following table contains the security update information for .NET Framework installations running on Windows RT 8.1 for the Monthly Rollup.

Deployment	The 4014555 update is available via Windows Update only. The 4014551 update is available via Windows Update only. The 4014546 update is available via Windows Update only.
Restart Requirement	You must restart the system after applying this security update.
Removal Information	Click Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates. Then select from the list of updates.
File Information	See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.

Windows 10 (.NET Framework Installations)

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 10.

Security update file name	For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for 32-bit Systems: Windows10.0-KB4015221-x86.msu
	For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for x64-based Systems: Windows10.0-KB4015221-x64.msu
	For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for 32-bit Systems: Windows10.0-KB4015221-x86.msu
	For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for x64-based Systems: Windows10.0-KB4015221-x64.msu
	For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1511: Windows10.0-KB4015219-x86.msu
	For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1511: Windows10.0-KB4015219-x64.msu
	For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1511: Windows10.0-KB4015219-x86.msu
	For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1511: Windows10.0-KB4015219-x64.msu
	For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1607: Windows10.0-KB4015217-x86.msu
	For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1607: Windows10.0-KB4015217-x64.msu
	For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1607: Windows10.0-KB4015217-x86.msu
	For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1607: Windows10.0-KB4015217-x64.msu
	For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1703: Windows10.0-KB4018483-x86.msu
	For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1703: Windows10.0-KB4018483-x64.msu
	For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1703: Windows10.0-KB4018483-x86.msu
	For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1703: Windows10.0-KB4018483-x64.msu
Installation switches	For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Restart requirement	Yes, you must restart your system after you apply this security update.
Removal information	To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates. Then select from the list of updates.
File information	See Microsoft Knowledge Base Article 4015221 See Microsoft Knowledge Base Article 4015219 See Microsoft Knowledge Base Article 4015217 See Microsoft Knowledge Base Article 4018483
Registry key verification	These updates do not add a registry key to validate their installation.

Windows Server 2016

Reference Table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 10.

Security update file name	For Microsoft .NET Framework 3.5 on Windows Server 2016: Windows10.0-KB4015217-x64.msu
	For Microsoft .NET Framework 4.6.2 on Windows Server 2016: Windows10.0-KB4015217-x64.msu
Installation switches	For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Restart requirement	Yes, you must restart your system after you apply this security update.
Removal information	To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates. Then select from the list of updates.
File information	See Microsoft Knowledge Base Article 4015217
Registry key verification	These updates do not add a registry key to validate their installation.

April 11, 2017 support package deployment tables

Microsoft Windows Deployment Tables

Windows Vista (all editions)

Windows Server 2008 (all editions)

Internet Explorer Deployment Tables

Windows Vista (all editions)

Windows Server 2008 (all editions)

Microsoft Office Deployment Tables

Microsoft Office 2007 (all editions) and Other Software

Microsoft Office 2010 (all editions)

Microsoft Office 2013 (all editions)

Microsoft Office 2013 RT (all editions)

Microsoft Office 2016 (all editions)

Microsoft SharePoint Server 2010 (all editions)

Microsoft SharePoint Server 2013 (all editions)

Microsoft Office Web Apps 2010 (all versions)

Microsoft Office Web Apps 2013 (all versions)

Office for Mac 2011

.NET Deployment Tables – Security Only Release

Windows Vista (all editions)

Windows Server 2008 (all editions)

Windows 7 Service Pack 1 (.NET Framework Installations)

Windows Server 2008 R2 (.NET Framework Installations)

Windows 8.1 (.NET Framework Installations)

Windows Server 2012 and Windows Server 2012 R2 (.NET Framework Installations)

Windows 10 (.NET Framework Installations)

.NET Deployment Tables – Monthly Rollup

Windows Vista (all editions)

Windows Server 2008 (all editions)

Windows 7 Service Pack 1 (.NET Framework Installations)

Windows Server 2008 R2 (.NET Framework Installations)

Windows 8.1 (.NET Framework Installations)

Windows Server 2012 and Windows Server 2012 R2 (.NET Framework Installations)

Windows RT 8.1 (all editions)

Windows 10 (.NET Framework Installations)

Windows Server 2016

Need more help?

Want more options?

Was this information helpful?

Thank you for your feedback!