This article describes an issue when you apply a sales invoice that contains unrealized VAT and negative line to a credit memo in the Italian version of Microsoft Dynamics NAV 2009. This issue still occurs after implementing the correction of KB 2882952.
Follow the steps in the code changes section to solve this issue. This problem occurs in the following products:
-
The Italian version of Microsoft Dynamics NAV 2009 R2
-
The Italian version of Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)
Resolution
Hotfix information
A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.
Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.
Installation information
Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure. However, they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.
Note Before you install this hotfix, verify that all Microsoft Dynamics NAV client users are logged off the system. This includes Microsoft Dynamics NAV Application Server (NAS) services. You should be the only client user who is logged on when you implement this hotfix.
To implement this hotfix, you must have a developer license.
We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
-
The Modify permission for the object that you will be changing.
-
The Execute permission for the System Object ID 5210 object and for the System Object ID 9015
object.
Note You do not have to have rights to the data stores unless you have to perform data repair.
Code changes
Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:
-
Change the code in Keys in the VAT Entry table (254) as follows:
Existing code...
KeyGroups=SalesTax }
{ ;Type,Country/Region Code,VAT Registration No.,VAT Bus. Posting Group,VAT Prod. Posting Group,Posting Date;
SumIndexFields=Base,Additional-Currency Base;
KeyGroups=VIES_EC }
// Delete the following line.
{ ;Document No.,Posting Date }
// End of the deleted line.
{ ;Transaction No. }
{ ;Tax Jurisdiction Code,Tax Group Used,Tax Type,Use Tax,Posting Date;
KeyGroups=SalesTax }
{ ;Type,Closed,VAT Bus. Posting Group,VAT Prod. Posting Group,Tax Jurisdiction Code,Use Tax,Tax Liable,VAT Period,Operation Occurred Date,Activity Code;
...Replacement code
...
KeyGroups=SalesTax }
{ ;Type,Country/Region Code,VAT Registration No.,VAT Bus. Posting Group,VAT Prod. Posting Group,Posting Date;
SumIndexFields=Base,Additional-Currency Base;
KeyGroups=VIES_EC }
// Add the following line.
{ ;Document No.,Posting Date ;SumIndexFields=Remaining Unrealized Base,Remaining Unrealized Amount }
// End of the added line.
{ ;Transaction No. }
{ ;Tax Jurisdiction Code,Tax Group Used,Tax Type,Use Tax,Posting Date;
KeyGroups=SalesTax }
{ ;Type,Closed,VAT Bus. Posting Group,VAT Prod. Posting Group,Tax Jurisdiction Code,Use Tax,Tax Liable,VAT Period,Operation Occurred Date,Activity Code;
... -
Change the code in the GetUnRealizedVATPart function in the VAT Entry table (254) as follows:
Existing code 1...
END;
EXIT(GLSetup."Additional Reporting Currency");
END;
// Delete the following line.
PROCEDURE GetUnRealizedVATPart@2(SettledAmount@1003 : Decimal;Paid@1005 : Decimal;Full@1001 : Decimal;TotalUnrealVATAmountFirst@1006 : Decimal;TotalUnrealVATAmountLast@1007 : Decimal;Type2@1130000 : 'Sale,Purchase';DocType@1130001 : ' ,Payment,Invoice,Credit Memo,Finance Charge Memo,Reminder,Refund,,,,Dishonored';LedgEntryOpen@1130002 : Boolean;LedgEntryAmount@1130003 : Decimal;LedgEntryRemAmt@1130004 : Decimal;TotalPayments@1130005 : Decimal) : Decimal;
// End of the deleted line.
VAR
UnrealizedVatType@1000 : ' ,Percentage,First,Last,First (Fully Paid),Last (Fully Paid)';
BEGIN
IF (Type <> 0) AND
...Replacement code 1
...
END;
EXIT(GLSetup."Additional Reporting Currency");
END;
// Add the following line.
PROCEDURE GetUnRealizedVATPart@2(SettledAmount@1003 : Decimal;Paid@1005 : Decimal;Full@1001 : Decimal;TotalUnrealVATAmountFirst@1006 : Decimal;TotalUnrealVATAmountLast@1007 : Decimal;Type2@1130000 : 'Sale,Purchase';DocType@1130001 : ' ,Payment,Invoice,Credit Memo,Finance Charge Memo,Reminder,Refund,,,,Dishonored';LedgEntryOpen@1130002 : Boolean;LedgEntryAmount@1130003 : Decimal;LedgEntryRemAmt@1130004 : Decimal;TotalPayments@1130005 : Decimal;VATPart@1130006 : Decimal;VAR TransactionInclPrepmt@1130007 : Boolean) : Decimal;
// End of the added line.
VAR
UnrealizedVatType@1000 : ' ,Percentage,First,Last,First (Fully Paid),Last (Fully Paid)';
BEGIN
IF (Type <> 0) AND
...Existing code 2
...
(("Remaining Unrealized Amount" = 0) AND
("Remaining Unrealized Base" = 0))
THEN
EXIT(0);
// Delete the following lines.
//IF ABS(Paid) = ABS(Full) THEN
// EXIT(1);
CASE UnrealizedVatType OF
UnrealizedVatType::Percentage:
BEGIN
IF Type2 = Type2::Purchase THEN BEGIN
IF (DocType = DocType::"Credit Memo") THEN BEGIN
IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
EXIT(1)
END ELSE BEGIN
IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
EXIT(CalcVatPart(GetCurrencyCode(), 1.0, TotalPayments,
("Remaining Unrealized Amount" + "Remaining Unrealized Base")))
ELSE
EXIT(1)
END;
END
ELSE BEGIN
IF (DocType = DocType::"Credit Memo") THEN BEGIN
IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
EXIT(1)
END ELSE BEGIN
IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
EXIT(CalcVatPart(GetCurrencyCode(), 1.0, TotalPayments,
("Remaining Unrealized Amount" + "Remaining Unrealized Base")))
ELSE
EXIT(1)
END;
END;
// End of the deleted lines.
END;
UnrealizedVatType::First,UnrealizedVatType::"First (Fully Paid)":
BEGIN
IF NOT LedgEntryOpen OR ("VAT Calculation Type" = "VAT Calculation Type"::"Reverse Charge VAT") THEN
...Replacement code 2
...
(("Remaining Unrealized Amount" = 0) AND
("Remaining Unrealized Base" = 0))
THEN
EXIT(0);
// Add the following lines.
IF (ABS(GetRemainingUnrealizedAmount("Document No.","Posting Date")) = ABS(Paid)) AND
NOT IsPrepaymentIncluded(Type2,DocType,"Document No.")
THEN BEGIN
VATPart := 1;
EXIT(VATPart);
END;
CASE UnrealizedVatType OF
UnrealizedVatType::Percentage:
IF Type2 = Type2::Purchase THEN BEGIN
TransactionInclPrepmt := FALSE;
IF DocType = DocType::"Credit Memo" THEN BEGIN
IF PurchCrMemoInclPrepmt("Document No.") THEN BEGIN
TransactionInclPrepmt := TRUE;
IF VATPart = 0 THEN BEGIN
IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
(ABS(Paid) = ABS(Full))
THEN
VATPart := 1
ELSE
VATPart :=
CalcVatPart(
GetCurrencyCode,1.0,TotalPayments,
GetTransactionRemainingAmount("Transaction No."));
END;
EXIT(VATPart);
END ELSE
IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
EXIT(1)
END ELSE BEGIN
IF PurchInvInclPrepmt("Document No.") THEN BEGIN
TransactionInclPrepmt := TRUE;
IF VATPart = 0 THEN BEGIN
IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
(ABS(Paid) = ABS(Full))
THEN
VATPart := 1
ELSE
VATPart :=
CalcVatPart(
GetCurrencyCode,1.0,TotalPayments,
GetTransactionRemainingAmount("Transaction No."));
END;
EXIT(VATPart);
END ELSE
IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
EXIT(
CalcVatPart(
GetCurrencyCode,1.0,TotalPayments,
("Remaining Unrealized Amount" + "Remaining Unrealized Base")));
EXIT(1);
END;
END ELSE BEGIN
TransactionInclPrepmt := FALSE;
IF DocType = DocType::"Credit Memo" THEN BEGIN
IF SalesInvInclPrepmt("Document No.") THEN BEGIN
TransactionInclPrepmt := TRUE;
IF VATPart = 0 THEN BEGIN
IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
(ABS(Paid) = ABS(Full))
THEN
VATPart := 1
ELSE
VATPart :=
CalcVatPart(
GetCurrencyCode,1.0,TotalPayments,
GetTransactionRemainingAmount("Transaction No."));
END;
EXIT(VATPart);
END;
IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
EXIT(1);
EXIT(TotalPayments / ("Remaining Unrealized Amount" + "Remaining Unrealized Base"));
END;
IF SalesInvInclPrepmt("Document No.") THEN BEGIN
TransactionInclPrepmt := TRUE;
IF VATPart = 0 THEN BEGIN
IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
(ABS(Paid) = ABS(Full))
THEN
VATPart := 1
ELSE
VATPart :=
CalcVatPart(
GetCurrencyCode,1.0,TotalPayments,
GetTransactionRemainingAmount("Transaction No."));
END;
EXIT(VATPart);
END ELSE
IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
EXIT(
CalcVatPart(
GetCurrencyCode,1.0,TotalPayments,
("Remaining Unrealized Amount" + "Remaining Unrealized Base")));
EXIT(1);
// End of the added lines.
END;
UnrealizedVatType::First,UnrealizedVatType::"First (Fully Paid)":
BEGIN
IF NOT LedgEntryOpen OR ("VAT Calculation Type" = "VAT Calculation Type"::"Reverse Charge VAT") THEN
... -
Change the code in the SalesInvInclPrepmt function in the VAT Entry table (254) as follows:
Existing code...
EXIT(RemainingAmount - SettledAmount);
EXIT(RemainingAmount - (SettledAmount / CurrencyFactor));
END;
BEGIN
END.
}
}
...Replacement code
...
EXIT(RemainingAmount - SettledAmount);
EXIT(RemainingAmount - (SettledAmount / CurrencyFactor));
END;
// Add the following lines.
LOCAL PROCEDURE SalesInvInclPrepmt@1130019(DocNo@1130000 : Code[20]) : Boolean;
VAR
SalesInvLine@1130001 : Record 113;
BEGIN
SalesInvLine.SETRANGE("Document No.",DocNo);
SalesInvLine.SETRANGE("Prepayment Line",TRUE);
EXIT(NOT SalesInvLine.ISEMPTY);
END;
LOCAL PROCEDURE SalesCrMemoInclPrepmt@1130101(DocNo@1130000 : Code[20]) : Boolean;
VAR
SalesCrMemoLine@1130001 : Record 115;
BEGIN
SalesCrMemoLine.SETRANGE("Document No.",DocNo);
SalesCrMemoLine.SETRANGE("Prepayment Line",TRUE);
EXIT(NOT SalesCrMemoLine.ISEMPTY);
END;
LOCAL PROCEDURE PurchInvInclPrepmt@1130021(DocNo@1130000 : Code[20]) : Boolean;
VAR
PurchInvLine@1130001 : Record 123;
BEGIN
PurchInvLine.SETRANGE("Document No.",DocNo);
PurchInvLine.SETRANGE("Prepayment Line",TRUE);
EXIT(NOT PurchInvLine.ISEMPTY);
END;
LOCAL PROCEDURE PurchCrMemoInclPrepmt@1130020(DocNo@1130000 : Code[20]) : Boolean;
VAR
PurchCrMemoLine@1130001 : Record 125;
BEGIN
PurchCrMemoLine.SETRANGE("Document No.",DocNo);
PurchCrMemoLine.SETRANGE("Prepayment Line",TRUE);
EXIT(NOT PurchCrMemoLine.ISEMPTY);
END;
LOCAL PROCEDURE GetTransactionRemainingAmount@1130016(TransactionNo@1130000 : Integer) TransactionAmount : Decimal;
VAR
VATEntry@1130001 : Record 254;
BEGIN
WITH VATEntry DO BEGIN
SETRANGE("Transaction No.",TransactionNo);
IF FINDSET THEN
REPEAT
TransactionAmount += "Remaining Unrealized Base" + "Remaining Unrealized Amount";
UNTIL NEXT = 0;
END;
END;
LOCAL PROCEDURE GetRemainingUnrealizedAmount@1130017(DocumentNo@1130000 : Code[20];PostingDate@1130001 : Date) : Decimal;
VAR
VATEntry@1130002 : Record 254;
BEGIN
VATEntry.SETCURRENTKEY("Document No.","Posting Date");
VATEntry.SETRANGE("Document No.",DocumentNo);
VATEntry.SETRANGE("Posting Date",PostingDate);
VATEntry.CALCSUMS("Remaining Unrealized Base","Remaining Unrealized Amount");
EXIT(VATEntry."Remaining Unrealized Base" + VATEntry."Remaining Unrealized Amount");
END;
LOCAL PROCEDURE IsPrepaymentIncluded@1130023(VATType@1130002 : 'Sale,Purchase';DocumentType@1130000 : ' ,Payment,Invoice,Credit Memo,Finance Charge Memo,Reminder,Refund,,,,Dishonored';DocumentNo@1130001 : Code[20]) : Boolean;
BEGIN
CASE VATType OF
VATType::Purchase:
IF DocumentType = DocumentType::"Credit Memo" THEN
EXIT(PurchCrMemoInclPrepmt(DocumentNo))
ELSE
EXIT(PurchInvInclPrepmt(DocumentNo));
VATType::Sale:
IF DocumentType = DocumentType::"Credit Memo" THEN
EXIT(SalesInvInclPrepmt(DocumentNo))
ELSE
EXIT(SalesCrMemoInclPrepmt(DocumentNo));
END;
END;
// End of the added lines.
BEGIN
END.
}
}
... -
Change the code in the CustUnrealizedVAT function in the Gen. Jnl.-Post Line Codeunit (12) as follows:
Existing code 1...
SalesVATUnrealAccount@1010 : Code[20];
LastConnectionNo@1011 : Integer;
TotalPayments@1130000 : Decimal;
Type2@1130001 : 'Sale,Purchase';
BEGIN
PaidAmount := CustLedgEntry2."Amount (LCY)" - CustLedgEntry2."Remaining Amt. (LCY)";
VATEntry2.RESET;
VATEntry2.SETCURRENTKEY("Transaction No.");
...Replacement code 1
...
SalesVATUnrealAccount@1010 : Code[20];
LastConnectionNo@1011 : Integer;
TotalPayments@1130000 : Decimal;
Type2@1130001 : 'Sale,Purchase';
// Add the following line.
TransactionInclPrepmt@1130002 : Boolean;
// End of the added line.
BEGIN
PaidAmount := CustLedgEntry2."Amount (LCY)" - CustLedgEntry2."Remaining Amt. (LCY)";
VATEntry2.RESET;
VATEntry2.SETCURRENTKEY("Transaction No.");
...Existing code 2
...
InsertSummarizedVAT;
LastConnectionNo := VATEntry2."Sales Tax Connection No.";
END;
// Delete the following lines.
VATPart := VATEntry2.GetUnRealizedVATPart(
ROUND(SettledAmount / CustLedgEntry2.GetOriginalCurrencyFactor),
PaidAmount,
CustLedgEntry2."Original Amt. (LCY)",
TotalUnrealVATAmountFirst,
TotalUnrealVATAmountLast,
Type2::Sale,
CustLedgEntry2."Document Type",
CustLedgEntry2.Open,
CustLedgEntry2.Amount,
CustLedgEntry2."Remaining Amount",
TotalPayments);
// End of the deleted lines.
IF VATPart > 0 THEN BEGIN
CASE VATEntry2."VAT Calculation Type" OF
VATEntry2."VAT Calculation Type"::"Normal VAT",
...Replacement code 2
...
InsertSummarizedVAT;
LastConnectionNo := VATEntry2."Sales Tax Connection No.";
END;
// Add the following lines.
VATPart :=
VATEntry2.GetUnRealizedVATPart(
ROUND(SettledAmount / CustLedgEntry2.GetOriginalCurrencyFactor),
PaidAmount,
CustLedgEntry2."Original Amt. (LCY)",
TotalUnrealVATAmountFirst,
TotalUnrealVATAmountLast,
Type2::Sale,
CustLedgEntry2."Document Type",
CustLedgEntry2.Open,
CustLedgEntry2.Amount,
CustLedgEntry2."Remaining Amount",
TotalPayments,
VATPart,
TransactionInclPrepmt);
// End of the added lines.
IF VATPart > 0 THEN BEGIN
CASE VATEntry2."VAT Calculation Type" OF
VATEntry2."VAT Calculation Type"::"Normal VAT",
...Existing code 3
...
VATEntry2."Add.-Curr. Rem. Unreal. Base" * VATPart,
AddCurrency."Amount Rounding Precision");
END;
// Delete the following line.
TotalPayments := TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
// End of the deleted line.
IF VATAmount <> 0 THEN BEGIN
InitGLEntry(SalesVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
...Replacement code 3
...
VATEntry2."Add.-Curr. Rem. Unreal. Base" * VATPart,
AddCurrency."Amount Rounding Precision");
END;
// Add the following lines.
IF TransactionInclPrepmt THEN
TotalPayments := TotalPayments - ROUND(TotalPayments * VATPart)
ELSE
TotalPayments :=
TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
// End of the added lines.
IF VATAmount <> 0 THEN BEGIN
InitGLEntry(SalesVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
... -
Change the code in the VendUnrealizedVAT function in the Gen. Jnl.-Post Line Codeunit (12) as follows:
Existing code 1...
PurchReverseUnrealAccount@1012 : Code[20];
LastConnectionNo@1013 : Integer;
Type2@1130000 : 'Sale,Purchase';
TotalPayments@1130001 : Decimal;
BEGIN
VATEntry2.RESET;
VATEntry2.SETCURRENTKEY("Transaction No.");
VATEntry2.SETRANGE("Transaction No.",VendLedgEntry2."Transaction No.");
...Replacement code 1
...
PurchReverseUnrealAccount@1012 : Code[20];
LastConnectionNo@1013 : Integer;
Type2@1130000 : 'Sale,Purchase';
TotalPayments@1130001 : Decimal;
// Add the following line.
TransactionInclPrepmt@1130002 : Boolean;
// End of the added line.
BEGIN
VATEntry2.RESET;
VATEntry2.SETCURRENTKEY("Transaction No.");
VATEntry2.SETRANGE("Transaction No.",VendLedgEntry2."Transaction No.");
...Existing code 2
...
IF LastConnectionNo <> VATEntry2."Sales Tax Connection No." THEN BEGIN
InsertSummarizedVAT;
LastConnectionNo := VATEntry2."Sales Tax Connection No.";
END;
// Delete the following lines.
IF (TotalPayments <= 0) AND (VendLedgEntry2."Document Type" = VendLedgEntry2."Document Type"::Invoice) THEN
EXIT;
VATPart := VATEntry2.GetUnRealizedVATPart(
ROUND(SettledAmount / VendLedgEntry2.GetOriginalCurrencyFactor),
PaidAmount,
VendLedgEntry2."Original Amt. (LCY)",
TotalUnrealVATAmountFirst,
TotalUnrealVATAmountLast,
Type2::Purchase,
VendLedgEntry2."Document Type",
VendLedgEntry2.Open,
VendLedgEntry2.Amount,
VendLedgEntry2."Remaining Amount",
TotalPayments);
// End of the deleted lines.
IF VATPart >= 0 THEN BEGIN
IF VATPart <> 0 THEN BEGIN
CASE VATEntry2."VAT Calculation Type" OF
...Replacement code 2
...
IF LastConnectionNo <> VATEntry2."Sales Tax Connection No." THEN BEGIN
InsertSummarizedVAT;
LastConnectionNo := VATEntry2."Sales Tax Connection No.";
END;
// Add the following lines.
IF ((TotalPayments <= 0) AND (NOT TransactionInclPrepmt)) AND
(VendLedgEntry2."Document Type" = VendLedgEntry2."Document Type"::Invoice)
THEN
EXIT;
VATPart :=
VATEntry2.GetUnRealizedVATPart(
ROUND(SettledAmount / VendLedgEntry2.GetOriginalCurrencyFactor),
PaidAmount,
VendLedgEntry2."Original Amt. (LCY)",
TotalUnrealVATAmountFirst,
TotalUnrealVATAmountLast,
Type2::Purchase,
VendLedgEntry2."Document Type",
VendLedgEntry2.Open,
VendLedgEntry2.Amount,
VendLedgEntry2."Remaining Amount",
TotalPayments,
VATPart,
TransactionInclPrepmt);
// End of the added lines.
IF VATPart >= 0 THEN BEGIN
IF VATPart <> 0 THEN BEGIN
CASE VATEntry2."VAT Calculation Type" OF
...Existing code 3
...
PurchVATUnrealAccount := TaxJurisdiction."Unreal. Tax Acc. (Purchases)";
END;
END;
// Delete the following lines.
VATAmount := ROUND((VATEntry2."Remaining Unrealized Amount" * VATPart),GLSetup."Amount Rounding Precision");
VATBase := ROUND((VATEntry2."Remaining Unrealized Base"* VATPart),GLSetup."Amount Rounding Precision");
TotalPayments := TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
// End of the deleted lines.
IF VATAmount <> 0 THEN BEGIN
InitGLEntry(PurchVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
...Replacement code 3
...
PurchVATUnrealAccount := TaxJurisdiction."Unreal. Tax Acc. (Purchases)";
END;
END;
// Add the following lines.
VATAmount := ROUND(VATEntry2."Remaining Unrealized Amount" * VATPart,GLSetup."Amount Rounding Precision");
VATBase := ROUND(VATEntry2."Remaining Unrealized Base" * VATPart,GLSetup."Amount Rounding Precision");
IF TransactionInclPrepmt THEN
TotalPayments := TotalPayments - ROUND(TotalPayments * VATPart)
ELSE
TotalPayments :=
TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
// End of the added lines.
IF VATAmount <> 0 THEN BEGIN
InitGLEntry(PurchVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
...
Prerequisites
You must have one of the following products installed to apply this hotfix:
-
The Italian localization of Microsoft Dynamics NAV 2009 R2
-
The Italian localization of Microsoft Dynamics NAV 2009 SP1
Removal information
You cannot remove this hotfix.
Status
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Usefor other considerations.
