In this situation, the following event may be written to the System log:
Additionally, when you go to the Details tab in this event and then select friendly view, you may notice the following:
0000: 00000000 00000001 00000000 C004002D
0010: 00002005 C0000034 00000000 00000000
0020: 00000000 00000000
C0000034 - means STATUS_OBJECT_NAME_NOT_FOUND
C004002D - means IO_DUMP_DRIVER_LOAD_FAILURE
To resolve this issue, check whether event ID 45 is logged in the System log. If you see this event, verify the contents under the DumpFilters registry value:
- Open the Run box. To do this, press the Windows logo key +R.
- Type regedit, and then press Enter.
- Locate and click the following registry entry:HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\CrashControl\
- From the pane on the right, verify the contents under the DumpFilters registry value.
- Remove everything and make sure that "dumpfve.sys" is the only value listed.
- Exit Registry editor.
- Restart the computer to enable Fast Startup.
WorkaroundIf you want to shut down the computer without using the Hybrid Shutdown behavior, you can use Shutdown.exe instead. Full shutdown is the default when you use Shutdown.exe, as follows:
Shutdown /s /t 0
The Shutdown.exe command also includes an optional /hybrid parameter that can be used if you want to use the new method:
Shutdown /s /hybrid /t 0
- The Fast Startup setting doesn’t apply to Restart.
- Fast Startup is enabled by default in Windows.
- Disabling Fast Startup is not recommended.
When you restart the computer, this typically means that you want a completely new Windows state, either because you have installed a driver or replaced Windows elements that cannot be replaced without a full restart.
Therefore, the restart process in Windows continues to perform a full boot cycle, without the hibernation performance improvement that's described in this article.
Article ID: 3211190 - Last Review: 14 Dec 2016 - Revision: 1