TPM Event Error 13 may be logged on Windows Server 2008 and Windows Server 2012

1) TPM Event Error 13 is logged in the Windows System Event Log occurs during boot.
Log Name: SystemSource: TPMDate: 11/9/2011 6:28:45 PMEvent ID: 13Task Category: NoneLevel: ErrorKeywords: ClassicUser: N/AComputer: 37L4247E20-11Description:The device driver for the Trusted Platform Module (TPM) encountered a non-recoverable error in the TPM hardware, which prevents TPM services (such as data encryption) from being used. For further help, please contact the computer manufacturer.
2) Device Manager still shows the TPM Security Device as present.

Example Scenarios where this might be reproduced:

NOTE: The TPM event 13 will occur regardless of whether the TPM is Enabled/Disabled or Activated/Deactivated and only at boot.

1) Enable Physical Presence via BIOS or Jumper (TPM Assert) within server chassis. 
2) Perform combination of Enable & Activate or Disabled & Deactivate within the UEFI BIOS Security configuration and install Windows.
3) Boot into Windows.
4) View Device Manager and verify if TPM Security Device instance is present.
5) Go to Windows Event Viewer and note if TPM Event 13 was logged after Disabling & Deactivating or Enabling & Activating the TPM Device from within UEFI setup.

You may also encounter a .NET Framework exception when loading a snap-in or other component from the MMC console.

This is a known issue with Windows Server 2008 SP2 and Windows Server 2012 on some IBM servers that cause a response code from the TPM which triggers the event error during boot. 

NOTE: Certain TPM commands are designed to be un-usable when the TPM is disabled or deactivated.
In this scenario the TPM Event Error 13 can be safely ignored.
More information
This has been known to occur on the following family of IBM xSeries of Servers: 366, 460, 3850, 3950 and possibly other models.

With Windows Server 2008 R2, when the TPM is Disabled & Deactivated or Enabled & Activated, Windows will not log an TPM Event 13 error.

In both versions of Windows i.e. Windows Server 2008 and Server 2008 R2, TPM presence will be shown in device manager even though it may be Disabled & Deactivated, this is by design.

It is not recommended to disable and prepare the TPM in succession.
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Article ID: 2679102 - Last Review: 04/16/2013 17:23:00 - Revision: 9.0

Windows Server 2008 Service Pack 2, Windows Server 2008 Standard, Windows Server 2008 Enterprise, Windows Server 2008 Datacenter, Windows Server 2012 Standard, Windows Server 2012 Datacenter

  • KB2679102