Introduction

A hotfix rollup package (build 4.0.3684.2) is available for Microsoft Forefront Identity Manager (FIM) 2010. This hotfix rollup package resolves the issues and adds the features that are described in the "More Information" section.

Update information

A supported update is available from Microsoft. We recommend that all customers apply this update to their production systems.

Microsoft Support

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the issues that are described in this article. Apply this hotfix only to systems that are experiencing the issues that are described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix Download Available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, go to the following Microsoft website:

http://support.microsoft.com/contactus/?ws=supportNote The "Hotfix Download Available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Component update packages

The following table contains the component update packages that are available for download from Microsoft Support.

Component

File name

FIM 2010 Add-ins and Extensions

FIMAddinsExtensions_x86_KB2819338.msp FIMAddinsExtensions_x64_KB2819338.msp

FIM 2010 Add-ins and Extensions Language Pack

FIMAddinsExtensionsLP_x86_KB2819338.msp FIMAddinsExtensionsLP_x64_KB2819338.msp

FIM 2010 Certificate Management

FIMCM_x86_KB2819338.msp
FIMCM_x64_KB2819338.msp

FIM 2010 Certificate Management Client

FIMCMClient_x86_KB2819338.msp
FIMCMClient_x64_KB2819338.msp

FIM 2010 Certificate Management Bulk Issuance Client

FIMCMBulkClient_x86_KB2819338.msp

FIM 2010 Service and Portal

FIMService_x64_KB2819338.msp

FIM 2010 Service Portal Language Pack

FIMServiceLP_x64_KB2819338.msp

FIM 2010 Synchronization Service

FIMSyncService_x64_KB2819338.msp

FIM 2010 Password Change Notification Service

FIMPCNS_x86_KB2819338.msp
FIMPCNS_x64_KB2819338.msp


Prerequisites

To apply this update, you must have Forefront Identity Manager 2010 build 4.0.2592.0 or a later build installed.

Restart requirement

You must restart the computer after you apply this update. Additionally, you may have to restart the server components.

Replacement information

This update replaces the following updates:

  • 2750673 A hotfix rollup package (build 4.0.3644.2) is available for Forefront Identity Manager 2010

  • 2737503 A hotfix rollup package (build 4.0.3627.2) is available for Forefront Identity Manager 2010

  • 2688078 A hotfix rollup package (build 4.0.3617.2) is available for Forefront Identity Manager 2010

  • 2635086 Update Rollup 2 (build 4.0.3606.2) is available for Forefront Identity Manager 2010

  • 2520954 A hotfix rollup package (build 4.0.3594.2) is available for Forefront Identity Manager 2010

  • 2502631 A hotfix rollup package (build 4.0.3576.2) is available for Forefront Identity Manager 2010

  • 2417774 A hotfix rollup package (build 4.0.3573.2) is available for Forefront Identity Manager 2010

  • 2272389 A hotfix rollup package (build 4.0.3558.2) is available for Microsoft Forefront Identity Manager (FIM) 2010

  • 2028634 A hotfix rollup package (build 4.0.3547.2) is available for Microsoft Forefront Identity Manager (FIM) 2010

  • 978864 Update Package 1 for Microsoft Forefront Identity Manager (FIM) 2010


File information

The global version of this update has the file attributes (or later file attributes) that are listed in the following table. The dates and the times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

File name

File size

Date

Time

Fimaddinsextensionslp_x64_kb2819338.msp

5,563,904

24-Feb-2013

1:15

Fimaddinsextensionslp_x86_kb2819338.msp

4,441,088

24-Feb-2013

1:03

Fimaddinsextensions_x64_kb2819338.msp

3,619,328

24-Feb-2013

1:15

Fimaddinsextensions_x86_kb2819338.msp

3,005,440

24-Feb-2013

1:03

Fimcmbulkclient_x86_kb2819338.msp

5,180,416

24-Feb-2013

1:03

Fimcmclient_x64_kb2819338.msp

5,828,608

24-Feb-2013

1:15

Fimcmclient_x86_kb2819338.msp

5,166,080

24-Feb-2013

1:03

Fimcm_x64_kb2819338.msp

21,659,648

24-Feb-2013

1:15

Fimcm_x86_kb2819338.msp

21,491,712

24-Feb-2013

1:03

Fimpcns_x64_kb2819338.msp

198,656

24-Feb-2013

1:15

Fimpcns_x86_kb2819338.msp

163,328

24-Feb-2013

1:03

Fimservicelp_x64_kb2819338.msp

4,858,880

24-Feb-2013

1:15

Fimservice_x64_kb2819338.msp

18,580,992

24-Feb-2013

1:15

Fimsyncservice_x64_kb2819338.msp

118,285,824

24-Feb-2013

1:15


More Information

Known issues in this update

After you install this update, rules extensions and custom management agents (MAs) that are based on Extensible MA (ECMA1 or ECMA 2.0) may not run and may produce a run status of "stopped-extension-dll-load." This issue occurs when you run such rules extensions or custom MAs after you change the configuration file for MIISServer.exe, Mmsscrpt.exe.config, or Dllhost.exe.config. For example, you edited the MIISServer.exe.config file to change the default batch size for processing sync entries for the FIM Service MA.

In this case, the synchronization engine installer for this update intentionally does not replace the configuration file to avoid deleting your previous changes. Because the configuration file is not replaced, entries that are required by this update will not be present in the files, and the synchronization engine will not load any rules extension DLLs when the engine runs a Full Import or Delta Sync run profile.

To resolve this issue, follow these steps:

  1. Make a backup copy of the MIIServer.exe.config file.

  2. Open the MIIServer.exe.config file in a text editor or in Microsoft Visual Studio.

    • Make sure that you open the text editor by using the Run as Administrator option so that Windows will let you save the changes.

    • If you do not open the text editor by using the Run as Administrator option and if the UserAccountControl option is enabled, Windows will not let the file be saved to the \bin folder.

  3. Find the <runtime> section in the MIIServer.exe.config file. Replace the content of the <dependentAssembly> section with the following:

    <dependentAssembly>
    <assemblyIdentity name="Microsoft.MetadirectoryServicesEx" publicKeyToken="31bf3856ad364e35" />
    <bindingRedirect oldVersion="3.3.0.0" newVersion="4.0.2.0" />
    <bindingRedirect oldVersion="4.0.0.0" newVersion="4.0.2.0" />
    <bindingRedirect oldVersion="4.0.1.0" newVersion="4.0.2.0" />
    </dependentAssembly>

  4. Save the changes to the file.

  5. Find the Mmsscrpt.exe.config file in the same directory and the Dllhost.exe.config in the parent directory. Repeat steps 1 through 4 for these two files.

    Note You might not have a file that is named "Dllhost.exe.config" in the parent directory. It is needed only for ECMA1 and ECMA 2.0 management agents that are running out-of-process. If you are running management agents in this mode, copy the MIIServer.exe.config file to the parent folder (..\Synchronization Service), and then rename it "Dllhost.exe.config."

  6. Restart the Forefront Identity Manager Synchronization Service (FIMSynchronizationService).

  7. Verify that the rules extensions and custom management agents now work as expected.


Included in this update

Included in this hotfix package is a new version of the Microsoft.MetadirectoryServicesEx.dll file (also known as the interface DLL). This new version is 4.0.2.0. If you have MA extensions for ECMA1/XMA, ECMA 2.0, or rules extensions, you might have to take additional actions for these extensions to continue working. This is because your DLL will have references to an earlier version (4.0.x.0). There are three files that have binding redirect information. They are used as follows:

  • MIIServer.exe.config: All ECMA1 and ECMA 2.0 management agents and all rules extensions that are running in-process

  • Mmsscrpt.exe.config: All rules extensions that are running out-of-process

  • Dllhost.exe.config: All ECMA1 and ECMA 2.0 management agents that are running out-of-process


Issues that are fixed by this update

FIM Synchronization Service

Issue

In some cases, the Exchange configuration options on the Active Directory Management Agent do not appear. These options will now always be visible even if Exchange is not detected in the source directory.

References

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:

824684 Description of the standard terminology that is used to describe Microsoft software updates

Need more help?

Expand your skills
Explore Training
Get new features first
Join Microsoft Insiders

Was this information helpful?

What affected your experience?

Thank you for your feedback!

×