This article applies to Microsoft Dynamics NAV for all language locales.

Symptoms

In the RoleTailored client (RTC), the Rounding Factor in the Analysis View is not considered. For example, you set the Rounding Factor to "1000" in the Analysis View. However, the numbers are not displayed in thousands.
This problem occurs in the following products:

  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

  • Microsoft Dynamics NAV 2009 R2

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:

  • The Modify permission for the object that you will be changing.

  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.



Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps in the Sales Analysis by Dim Matrix form (9227):
Note The same changes need to be made to Sales Analysis by Dim Matrix Page (9227). If name differs it is specified for the Page.

  1. Change the Blank Zero Property from "No" to "Yes" in the TotalQuantity field (6).

  2. Change the code in the TotalQuantity - OnFormat form trigger as follows:
    Existing code

    ...
    // Delete the following lines.
    IF Quantity = 0 THEN
    Text := '';
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);

    CurrForm.TotalQuantity.UPDATEFONTBOLD("Show in Bold");
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  3. Change the code in the QuantityOnFormat page trigger as follows:
    Existing code

    ...
    // Delete the following lines.
    IF Quantity = 0 THEN
    "+QuantityHideValue" := TRUE;
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);

    TotalQuantityEmphasize := "Show in Bold";
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  4. Change the Blank Zero Property from "No" to "Yes" in the TotalInvtValue field (8).

  5. Change the code in the TotalInvtValue - OnFormat form trigger as follows:
    Existing code

    ...
    // Delete the following lines.
    IF Amount = 0 THEN
    Text := ''
    ELSE
    Text := FORMAT(Amount,0,NormalFormatString);
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    CurrForm.TotalInvtValue.UPDATEFONTBOLD("Show in Bold");
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  6. Change the code in the AmountOnFormat page trigger as follows:
    Existing code

    ...
    // Delete the following lines.
    IF Amount = 0 THEN
    Text := ''
    ELSE
    Text := FORMAT(Amount,0,NormalFormatString);
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    TotalInvtValueEmphasize := "Show in Bold";
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  7. Change the code in the Field1 - OnFormat form trigger and in the MatrixData1OnFormat page trigger in the Field1 field (13) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  8. Change the code in the Field2 - OnFormat form trigger and in the MatrixData2OnFormat page trigger in the Field2 field (15) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  9. Change the code in the Field3 - OnFormat form trigger and in the MatrixData3OnFormat page trigger in the Field3 field (17) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  10. Change the code in the Field4 - OnFormat form trigger and in the MatrixData4OnFormat page trigger in the Field4 field (25) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  11. Change the code in the Field5 - OnFormat form trigger and in the MatrixData5OnFormat page trigger in the Field5 field (23) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  12. Change the code in the Field6 - OnFormat form trigger and in the MatrixData6OnFormat page trigger in the Field6 field (21) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  13. Change the code in the Field7 - OnFormat form trigger and in the MatrixData7OnFormat page trigger in the Field7 field (19) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  14. Change the code in the Field8 - OnFormat form trigger and in the MatrixData8OnFormat page trigger in the Field8 field (31) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  15. Change the code in the Field9 - OnFormat form trigger and in the MatrixData9OnFormat page trigger in the Field9 field (39) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  16. Change the code in the Field10 - OnFormat form trigger and in the MatrixData10OnFormat page trigger in the Field10 field (41) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  17. Change the code in the Field11 - OnFormat form trigger and in the MatrixData11OnFormat page trigger in the Field11 field (45) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  18. Change the code in the Field12 - OnFormat form trigger and in the MatrixData12OnFormat page trigger in the Field12 field (27) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  19. Change the code in the Field13 - OnFormat form trigger and in the MatrixData13OnFormat page trigger in the Field13 field (29) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  20. Change the code in the Field14 - OnFormat form trigger and in the MatrixData14OnFormat page trigger in the Field14 field (33) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  21. Change the code in the Field15 - OnFormat form trigger and in the MatrixData15OnFormat page trigger in the Field15 field (35) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  22. Change the code in the Field16 - OnFormat form trigger and in the MatrixData16OnFormat page trigger in the Field16 field (37) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  23. Change the code in the Field17 - OnFormat form trigger and in the MatrixData17OnFormat page trigger in the Field17 field (43) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  24. Change the code in the Field18 - OnFormat form trigger and in the MatrixData18OnFormat page trigger in the Field18 field (47) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  25. Change the code in the Field19 - OnFormat form trigger and in the MatrixData19OnFormat page trigger in the Field19 field (49) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  26. Change the code in the Field20 - OnFormat form trigger and in the MatrixData20OnFormat page trigger in the Field20 field (51) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  27. Change the code in the Field21- OnFormat form trigger and in the MatrixData21OnFormat page trigger in the Field21 field (53) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  28. Change the code in the Field22- OnFormat form trigger and in the MatrixData22OnFormat page trigger in the Field22 field (55) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  29. Change the code in the Field23- OnFormat form trigger and in the MatrixData23OnFormat page trigger in the Field23 field (57) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  30. Change the code in the Field24- OnFormat form trigger and in the MatrixData24OnFormat page trigger in the Field24 field (59) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  31. Change the code in the Field25- OnFormat form trigger and in the MatrixData25OnFormat page trigger in the Field25 field (61) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  32. Change the code in the Field26- OnFormat form trigger and in the MatrixData26OnFormat page trigger in the Field26 field (63) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  33. Change the code in the Field27- OnFormat form trigger and in the MatrixData27OnFormat page trigger in the Field27 field (65) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  34. Change the code in the Field28- OnFormat form trigger and in the MatrixData28OnFormat page trigger in the Field28 field (67) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  35. Change the code in the Field29- OnFormat form trigger and in the MatrixData29OnFormat page trigger in the Field29 field (69) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  36. Change the code in the Field30- OnFormat form trigger and in the MatrixData30OnFormat page trigger in the Field30 field (71) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  37. Change the code in the Field31- OnFormat form trigger and in the MatrixData31OnFormat page trigger in the Field31 field (73) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  38. Change the code in the Field32- OnFormat form trigger and in the MatrixData32OnFormat page trigger in the Field32 field (75) as follows:
    Existing code

    ...
    // Delete the following lines.
    ItemAnalysisMgt.FormatAmount(Text,RoundingFactor);
    // End of the deleted lines.
    ...

    Replacement code

    ...

    ...
  39. Change the code in the CalcAmt function as follows:
    Existing code

    ...
    END;
    END;

    IF ShowOppositeSign THEN
    Amt := -Amt;
    EXIT(Amt);
    ...

    Replacement code

    ...
    END;
    END;

    IF ShowOppositeSign THEN
    Amt := -Amt;

    // Add the following lines.
    CASE RoundingFactor OF
    RoundingFactor::"1":
    Amt := ROUND(Amt,1);
    RoundingFactor::"1000":
    Amt := ROUND(Amt / 1000,0.1);
    RoundingFactor::"1000000":
    Amt := ROUND(Amt / 1000000,0.1);
    END;
    // End of the added lines.

    EXIT(Amt);
    ...


Prerequisites

You must have one of the following products installed to apply this hotfix:

  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

  • Microsoft Dynamics NAV 2009 R2



Removal information

You cannot remove this hotfix.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

References

VSTF DynamicsNAV SE: 256081

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Need more help?

Expand your skills
Explore Training
Get new features first
Join Microsoft Insiders

Was this information helpful?

What affected your experience?

Thank you for your feedback!

×