This article applies to Microsoft Dynamics NAV 2009 for all countries and all language locales.

Symptoms

Assume that you specify a value in the By Dimension field in Suggest Vendor Payments in Microsoft Dynamics NAV 2009 R2 and in Microsoft Dynamics NAV 2009 Service Pack 1 (SP1). When you run the Suggest Vendor Payments batch job, the system does not filter values according to the By Dimension value that you specified.

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:

  • The Modify permission for the object that you will be changing.

  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.



Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:

  1. Change the code in the MakeGenJnlLines function in the Suggest Vendor Payments report (393) as follows:
    Existing code 1

    ...
    LOCAL PROCEDURE MakeGenJnlLines@2();
    VAR
    GenJnlLine3@1000 : Record 81;
    LedgEntryDim@1001 : Record 355;
    TempDimBuf@1002 : Record 360;
    DimBufMgt@1003 : Codeunit 411;
    EntryNo@1004 : Integer;
    BEGIN
    TempPaymentBuffer.RESET;
    TempPaymentBuffer.DELETEALL;
    ...

    Replacement code 1

    ...
    LOCAL PROCEDURE MakeGenJnlLines@2();
    VAR
    GenJnlLine3@1000 : Record 81;
    LedgEntryDim@1001 : Record 355;
    TempDimBuf@1002 : Record 360;

    // Add the following line.
    GLSetup@1005 : Record 98;

    DimBufMgt@1003 : Codeunit 411;
    EntryNo@1004 : Integer;
    BEGIN
    TempPaymentBuffer.RESET;
    TempPaymentBuffer.DELETEALL;
    ...

    Existing code 2

    ...
    DimBufMgt@1003 : Codeunit 411;
    EntryNo@1004 : Integer;
    BEGIN
    TempPaymentBuffer.RESET;
    TempPaymentBuffer.DELETEALL;

    IF BalAccType = BalAccType::"Bank Account" THEN BEGIN
    CheckCurrencies(BalAccType,BalAccNo,PayableVendLedgEntry);
    SetBankAccCurrencyFilter(BalAccType,BalAccNo,PayableVendLedgEntry);
    END;
    ...

    Replacement code 2

    ...
    DimBufMgt@1003 : Codeunit 411;
    EntryNo@1004 : Integer;
    BEGIN
    TempPaymentBuffer.RESET;
    TempPaymentBuffer.DELETEALL;

    // Add the following line.
    GLSetup.GET;

    IF BalAccType = BalAccType::"Bank Account" THEN BEGIN
    CheckCurrencies(BalAccType,BalAccNo,PayableVendLedgEntry);
    SetBankAccCurrencyFilter(BalAccType,BalAccNo,PayableVendLedgEntry);
    END;
    ...

    Existing code 3

    ...
    UNTIL SelectedDim.NEXT = 0;
    EntryNo := DimBufMgt.FindDimensions(TempDimBuf);
    IF EntryNo = 0 THEN
    EntryNo := DimBufMgt.InsertDimensions(TempDimBuf);
    TempPaymentBuffer."Dimension Entry No." := EntryNo;

    // delete the following lines.
    TempPaymentBuffer."Global Dimension 1 Code" := VendLedgEntry."Global Dimension 1 Code";
    TempPaymentBuffer."Global Dimension 2 Code" := VendLedgEntry."Global Dimension 2 Code";
    // End of the lines.

    END ELSE BEGIN
    TempPaymentBuffer."Dimension Entry No." := 0;
    TempPaymentBuffer."Global Dimension 1 Code" := '';
    TempPaymentBuffer."Global Dimension 2 Code" := '';
    END;
    ...

    Replacement code 3

    ...
    UNTIL SelectedDim.NEXT = 0;
    EntryNo := DimBufMgt.FindDimensions(TempDimBuf);
    IF EntryNo = 0 THEN
    EntryNo := DimBufMgt.InsertDimensions(TempDimBuf);
    TempPaymentBuffer."Dimension Entry No." := EntryNo;

    / Add the following lines.
    IF TempPaymentBuffer."Dimension Entry No." <> 0 THEN BEGIN
    IF DimCodeIsInTempDimBuf(GLSetup."Global Dimension 1 Code",TempDimBuf) THEN
    TempPaymentBuffer."Global Dimension 1 Code" := VendLedgEntry."Global Dimension 1 Code";
    IF DimCodeIsInTempDimBuf(GLSetup."Global Dimension 2 Code",TempDimBuf) THEN
    TempPaymentBuffer."Global Dimension 2 Code" := VendLedgEntry."Global Dimension 2 Code";
    END ELSE BEGIN
    TempPaymentBuffer."Global Dimension 1 Code" := '';
    TempPaymentBuffer."Global Dimension 2 Code" := '';
    END;
    // End of the lines.

    END ELSE BEGIN
    TempPaymentBuffer."Dimension Entry No." := 0;
    TempPaymentBuffer."Global Dimension 1 Code" := '';
    TempPaymentBuffer."Global Dimension 2 Code" := '';
    END;
    ...
  2. Add a new function in the Suggest Vendor Payments report (393) as follows:

    LOCAL PROCEDURE DimCodeIsInTempDimBuf@1101(DimCode@1101 : Code[20];DimBuf@1102 : Record 360) : Boolean;
    BEGIN
    DimBuf.RESET;
    DimBuf.SETRANGE("Dimension Code",DimCode);
    EXIT(NOT DimBuf.ISEMPTY);
    END;

Prerequisites

You must have one of the following products installed to apply this hotfix:

  • Microsoft Dynamics NAV 2009 R2

  • Microsoft Dynamics NAV 2009 Service Pack 1

Removal information

You cannot remove this hotfix.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Need more help?

Expand your skills
Explore Training
Get new features first
Join Microsoft Insiders

Was this information helpful?

What affected your experience?

Thank you for your feedback!

×