Only partial quantity of a component is reversed to the To Assemble Bin when you undo a shipment for an ATO item that contains the component in Microsoft Dynamics NAV 2013

Applies to: Dynamics NAV 2013

This article applies to Microsoft Dynamics NAV for all countries and all language locales.

Symptoms


Assume that you integrate the Assembly Management feature with Warehouse Management System (WMS) in Microsoft Dynamics NAV 2013. You run the Undo shipment function for an "Assemble to order" (ATO) item that contains a component that uses item tracking. In this situation, only partial quantity of the component is reversed to the To Assemble Bin.  Therefore, there is an imbalance between bin contents and Qty. on hand in the item ledger entries for the component.

Resolution


Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
  • The Modify permission for the object that you will be changing.
  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.


Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:
  1. Change the code in the PostItemConsumption function in the "Assembly-Post" codeunit (900) as follows:
    Existing code
    ...
    ItemJnlLine."Unit Cost" := "Unit Cost";
    ItemJnlLine.Correction := IsCorrection;
    END;
    IF IsCorrection THEN

    // Delete the following lines.
    PostCorrectionItemJnLine(ItemJnlLine,ItemJnlPostLine,DATABASE::"Posted Assembly Line",ApplyToEntryNo)
    ELSE BEGIN
    AssemblyLineReserve.TransferAsmLineToItemJnlLine(AssemblyLine,ItemJnlLine,ItemJnlLine."Quantity (Base)",FALSE);
    ItemJnlPostLine.RunWithCheck(ItemJnlLine);
    AssemblyLineReserve.UpdateItemTrackingAfterPosting(AssemblyLine);
    END;
    PostWhseJnlLine(AssemblyHeader,ItemJnlLine,ItemJnlPostLine,WhseJnlRegisterLine);
    // End of the lines.

    EXIT(ItemJnlLine."Item Shpt. Entry No.");
    END;
    LOCAL PROCEDURE PostItemOutput@4(VAR AssemblyHeader@1001 : Record 900;PostingNoSeries@1007 : Code[10];QtyToOutput@1004 : Decimal;QtyToOutputBase@1005 : Decimal;VAR ItemJnlPostLine@1002 : Codeunit 22;VAR WhseJnlRegisterLine@1003 : Codeunit 7301;DocumentNo@1010 : Code[20];IsCorrection@1011 : Boolean;ApplyToEntryNo@1008 : Integer) : Integer;
    VAR
    ...
    Replacement code
    ...
    ItemJnlLine."Unit Cost" := "Unit Cost";
    ItemJnlLine.Correction := IsCorrection;
    END;
    IF IsCorrection THEN

    // Add the following lines.
    PostCorrectionItemJnLine(ItemJnlLine,AssemblyHeader,ItemJnlPostLine,DATABASE::"Posted Assembly Line",ApplyToEntryNo)
    ELSE BEGIN
    AssemblyLineReserve.TransferAsmLineToItemJnlLine(AssemblyLine,ItemJnlLine,ItemJnlLine."Quantity (Base)",FALSE);
    ItemJnlPostLine.RunWithCheck(ItemJnlLine);
    AssemblyLineReserve.UpdateItemTrackingAfterPosting(AssemblyLine);
    PostWhseJnlLine(AssemblyHeader,ItemJnlLine,ItemJnlPostLine,WhseJnlRegisterLine);
    END;
    // End of the lines.

    EXIT(ItemJnlLine."Item Shpt. Entry No.");
    END;
    LOCAL PROCEDURE PostItemOutput@4(VAR AssemblyHeader@1001 : Record 900;PostingNoSeries@1007 : Code[10];QtyToOutput@1004 : Decimal;QtyToOutputBase@1005 : Decimal;VAR ItemJnlPostLine@1002 : Codeunit 22;VAR WhseJnlRegisterLine@1003 : Codeunit 7301;DocumentNo@1010 : Code[20];IsCorrection@1011 : Boolean;ApplyToEntryNo@1008 : Integer) : Integer;
    VAR
    ...
  2. Change the code in the PostItemOutput function in the "Assembly-Post" codeunit (900) as follows:
    Existing code
    ...
    GLSetup."Unit-Amount Rounding Precision"));
    ItemJnlLine.Correction := IsCorrection;
    END;
    IF IsCorrection THEN

    // Delete the following lines.
    PostCorrectionItemJnLine(ItemJnlLine,ItemJnlPostLine,DATABASE::"Posted Assembly Header",ApplyToEntryNo)
    ELSE BEGIN
    AssemblyHeaderReserve.TransferAsmHeaderToItemJnlLine(AssemblyHeader,ItemJnlLine,ItemJnlLine."Quantity (Base)",FALSE);
    ItemJnlPostLine.RunWithCheck(ItemJnlLine);
    AssemblyHeaderReserve.UpdateItemTrackingAfterPosting(AssemblyHeader);
    END;
    PostWhseJnlLine(AssemblyHeader,ItemJnlLine,ItemJnlPostLine,WhseJnlRegisterLine);
    EXIT(ItemJnlLine."Item Shpt. Entry No.");
    END;
    LOCAL PROCEDURE PostCorrectionItemJnLine@37(VAR ItemJnlLine@1001 : Record 83;VAR ItemJnlPostLine@1008 : Codeunit 22;SourceType@1002 : Integer;ApplyToEntry@1005 : Integer);
    // End of the lines.

    VAR
    TempItemLedgEntry2@1000 : TEMPORARY Record 32;
    ATOLink@1003 : Record 904;
    TempItemLedgEntryInChain@1006 : TEMPORARY Record 32;
    ItemApplnEntry@1004 : Record 339;
    ...
    Replacement code
    ...
    GLSetup."Unit-Amount Rounding Precision"));
    ItemJnlLine.Correction := IsCorrection;
    END;
    IF IsCorrection THEN

    // Add the following lines.
    PostCorrectionItemJnLine(ItemJnlLine,AssemblyHeader,ItemJnlPostLine,DATABASE::"Posted Assembly Header",ApplyToEntryNo)
    ELSE BEGIN
    AssemblyHeaderReserve.TransferAsmHeaderToItemJnlLine(AssemblyHeader,ItemJnlLine,ItemJnlLine."Quantity (Base)",FALSE);
    ItemJnlPostLine.RunWithCheck(ItemJnlLine);
    AssemblyHeaderReserve.UpdateItemTrackingAfterPosting(AssemblyHeader);
    PostWhseJnlLine(AssemblyHeader,ItemJnlLine,ItemJnlPostLine,WhseJnlRegisterLine);
    END;
    EXIT(ItemJnlLine."Item Shpt. Entry No.");
    END;
    LOCAL PROCEDURE PostCorrectionItemJnLine@37(VAR ItemJnlLine@1001 : Record 83;AssemblyHeader@1007 : Record 900;VAR ItemJnlPostLine@1008 : Codeunit 22;SourceType@1002 : Integer;ApplyToEntry@1005 : Integer);
    // End of the lines.

    VAR
    TempItemLedgEntry2@1000 : TEMPORARY Record 32;
    ATOLink@1003 : Record 904;
    TempItemLedgEntryInChain@1006 : TEMPORARY Record 32;
    ItemApplnEntry@1004 : Record 339;
    ...
  3. Change the code in the PostCorrectionItemJnLine function in the "Assembly-Post" codeunit (900) as follows:
    Existing code
    ...
    ItemJnlLine."Warranty Date" := TempItemLedgEntry."Warranty Date";
    ItemJnlLine."Expiration Date" := TempItemLedgEntry."Expiration Date";
    ItemJnlLine."Item Shpt. Entry No." := 0;
    ItemJnlPostLine.RunWithCheck(ItemJnlLine);
    UNTIL TempItemLedgEntry2.NEXT = 0;
    END;
    LOCAL PROCEDURE FindAppliesToATOUndoEntry@46(VAR ItemLedgEntryInChain@1000 : Record 32) : Integer;
    BEGIN
    ...
    Replacement code
    ...
    ItemJnlLine."Warranty Date" := TempItemLedgEntry."Warranty Date";
    ItemJnlLine."Expiration Date" := TempItemLedgEntry."Expiration Date";
    ItemJnlLine."Item Shpt. Entry No." := 0;
    ItemJnlPostLine.RunWithCheck(ItemJnlLine);

    // Add the following line.
    PostWhseJnlLine(AssemblyHeader,ItemJnlLine,ItemJnlPostLine,WhseJnlRegisterLine);

    UNTIL TempItemLedgEntry2.NEXT = 0;
    END;
    LOCAL PROCEDURE FindAppliesToATOUndoEntry@46(VAR ItemLedgEntryInChain@1000 : Record 32) : Integer;
    BEGIN
    ...

Prerequisites

You must have Microsoft Dynamics NAV 2013 installed to apply this hotfix.

Removal information

You cannot remove this hotfix.

Status


Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.