The Ship-to Post Code, Ship-to City and Ship-to County values are missing when you select a new Ship-to Address Code value on a sales order in Microsoft Dynamics NAV 2013

Applies to: Dynamics NAV 2013

This article applies to Microsoft Dynamics NAV for all countries and all language locales.

Symptoms


When you enter a Ship-to Address Code value on a sales order in Microsoft Dynamics NAV 2013, the Post Code, City and County values are not transferred from the Ship-to Address card to the Ship-to Post Code field, the Ship-to City field and the Ship-to County field on the sales order. This problem only occurs if the Ship-to Country/Region Code value is already specified on the sales order and the value differs from the Country/Region Code value on the new ship-to address.

Resolution


Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2013 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.


Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure. However, they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
  • The Modify permission for the object that you will be changing.
  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.


Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:
  1. Change the code in Fields in the Location table (14) as follows:
    Existing code
    ...
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 5715; ;County ;Text30 }
    { 5718; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
    { 5719; ;Home Page ;Text90 ;ExtendedDatatype=URL }

    // Delete the following lines.
    { 5720; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND ("Country/Region Code" <> '') THEN
    Postcode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 5724; ;Use As In-Transit ;Boolean ;OnValidate=BEGIN
    IF "Use As In-Transit" THEN BEGIN
    TESTFIELD("Require Put-away",FALSE);
    TESTFIELD("Require Pick",FALSE);
    TESTFIELD("Use Cross-Docking",FALSE);
    ...
    Replacement code
    ...
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 5715; ;County ;Text30 }
    { 5718; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
    { 5719; ;Home Page ;Text90 ;ExtendedDatatype=URL }

    // Add the following line.
    { 5720; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 5724; ;Use As In-Transit ;Boolean ;OnValidate=BEGIN
    IF "Use As In-Transit" THEN BEGIN
    TESTFIELD("Require Put-away",FALSE);
    TESTFIELD("Require Pick",FALSE);
    TESTFIELD("Use Cross-Docking",FALSE);
    ...
  2. Change the code in Fields in the Customer table (18) as follows:
    Existing code
    ...
    { 32 ; ;Place of Export ;Code20 }
    { 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Customer;
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 34 ; ;Customer Disc. Group;Code20 ;TableRelation="Customer Discount Group" }

    // Delete the following lines.
    { 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 36 ; ;Collection Method ;Code20 }
    { 37 ; ;Amount ;Decimal ;AutoFormatType=1;
    AutoFormatExpr="Currency Code" }
    { 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
    CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Customer),
    ...
    Replacement code
    ...
    { 32 ; ;Place of Export ;Code20 }
    { 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Customer;
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 34 ; ;Customer Disc. Group;Code20 ;TableRelation="Customer Discount Group" }

    // Add the following line.
    { 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 36 ; ;Collection Method ;Code20 }
    { 37 ; ;Amount ;Decimal ;AutoFormatType=1;
    AutoFormatExpr="Currency Code" }
    { 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
    CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Customer),
    ...
  3. Change the code in Fields in the Vendor table (23) as follows:
    Existing code
    ...
    { 30 ; ;Shipment Method Code;Code10 ;TableRelation="Shipment Method" }
    { 31 ; ;Shipping Agent Code ;Code10 ;TableRelation="Shipping Agent" }
    { 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Vendor;
    ValidateTableRelation=No;
    TestTableRelation=No }

    // Delete the following lines.
    { 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
    CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Vendor),
    No.=FIELD(No.)));
    Editable=No }
    { 39 ; ;Blocked ;Option ;OptionString=[ ,Payment,All] }
    ...
    Replacement code
    ...
    { 30 ; ;Shipment Method Code;Code10 ;TableRelation="Shipment Method" }
    { 31 ; ;Shipping Agent Code ;Code10 ;TableRelation="Shipping Agent" }
    { 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Vendor;
    ValidateTableRelation=No;
    TestTableRelation=No }

    // Add the following line.
    { 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
    CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Vendor),
    No.=FIELD(No.)));
    Editable=No }
    { 39 ; ;Blocked ;Option ;OptionString=[ ,Payment,All] }
    ...
  4. Change the code in Fields in the Sales Header table (36) as follows:
    Existing code 1
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 86 ; ;Bill-to County ;Text30 }

    // Delete the following lines.
    { 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
    END;
    }
    // End of the lines.

    { 88 ; ;Sell-to Post Code ;Code20 ;TableRelation="Post Code";
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    END;
    ...
    Replacement code 1
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 86 ; ;Bill-to County ;Text30 }

    // Add the following line.
    { 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 88 ; ;Sell-to Post Code ;Code20 ;TableRelation="Post Code";
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    END;
    ...
    Existing code 2
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 89 ; ;Sell-to County ;Text30 }

    // Delete the following lines.
    { 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Sell-to Country/Region Code" <> xRec."Sell-to Country/Region Code") AND (xRec."Sell-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Sell-to City","Sell-to Post Code","Sell-to County");
    END;
    }
    // End of the lines.

    { 91 ; ;Ship-to Post Code ;Code20 ;TableRelation="Post Code";
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    END;
    ...
    Replacement code 2
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 89 ; ;Sell-to County ;Text30 }

    // Add the following line.
    { 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 91 ; ;Ship-to Post Code ;Code20 ;TableRelation="Post Code";
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    END;
    ...
    Existing code 3
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 92 ; ;Ship-to County ;Text30 }

    // Delete the following lines.
    { 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
    END;
    }
    // End of the lines.

    { 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
    { 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point";
    OnValidate=BEGIN
    UpdateSalesLines(FIELDCAPTION("Exit Point"),FALSE);
    END;
    ...
    Replacement code 3
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 92 ; ;Ship-to County ;Text30 }

    // Add the following line.
    { 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
    { 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point";
    OnValidate=BEGIN
    UpdateSalesLines(FIELDCAPTION("Exit Point"),FALSE);
    END;
    ...
  5. Change the code in Fields in the Purchase Header table (38) as follows:
    Existing code 1
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 86 ; ;Pay-to County ;Text30 }

    // Delete the following lines.
    { 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Pay-to Country/Region Code" <> xRec."Pay-to Country/Region Code") AND (xRec."Pay-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Pay-to City","Pay-to Post Code","Pay-to County");
    END;
    }
    // End of the lines.

    { 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
    ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Replacement code 1
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 86 ; ;Pay-to County ;Text30 }

    // Add the following line.
    { 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
    ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Existing code 2
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 89 ; ;Buy-from County ;Text30 }

    // Delete the following lines.
    { 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Buy-from Country/Region Code" <> xRec."Buy-from Country/Region Code") AND (xRec."Buy-from Country/Region Code" <> '') THEN
    PostCode.ClearFields("Buy-from City","Buy-from Post Code","Buy-from County");
    END;
    }
    // End of the lines.

    { 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
    ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Replacement code 2
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 89 ; ;Buy-from County ;Text30 }

    // Add the following line.
    { 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region }

    { 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
    ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Existing code 3
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 92 ; ;Ship-to County ;Text30 }

    // Delete the following lines.
    { 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
    END;
    }
    // End of the lines.

    { 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
    { 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.));
    OnValidate=BEGIN
    IF "Order Address Code" <> '' THEN BEGIN
    OrderAddr.GET("Buy-from Vendor No.","Order Address Code");
    ...
    Replacement code 3
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 92 ; ;Ship-to County ;Text30 }

    // Add the following line.
    { 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
    { 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.));
    OnValidate=BEGIN
    IF "Order Address Code" <> '' THEN BEGIN
    OrderAddr.GET("Buy-from Vendor No.","Order Address Code");
    ...
  6. Change the code in Fields in the Company Information table (79) as follows:
    Existing code
    ...
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 33 ; ;Ship-to County ;Text30 }
    { 34 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
    { 35 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }

    // Delete the following lines.
    { 36 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    { 37 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
    END;
    }
    // End of the lines.

    { 38 ; ;IBAN ;Code50 ;OnValidate=BEGIN
    CheckIBAN(IBAN);
    END;
    }
    { 39 ; ;SWIFT Code ;Code20 }
    ...
    Replacement code
    ...
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 33 ; ;Ship-to County ;Text30 }
    { 34 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
    { 35 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }

    // Add the following lines.
    { 36 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
    { 37 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
    // End of the lines.

    { 38 ; ;IBAN ;Code50 ;OnValidate=BEGIN
    CheckIBAN(IBAN);
    END;
    }
    { 39 ; ;SWIFT Code ;Code20 }
    ...
  7. Change the code in Fields in the Resource table (156) as follows:
    Existing code
    ...
    { 55 ; ;Automatic Ext. Texts;Boolean }
    { 56 ; ;No. Series ;Code10 ;TableRelation="No. Series";
    Editable=No }
    { 57 ; ;Tax Group Code ;Code10 ;TableRelation="Tax Group" }
    { 58 ; ;VAT Prod. Posting Group;Code10 ;TableRelation="VAT Product Posting Group" }

    // Delete the following lines.
    { 59 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 60 ; ;IC Partner Purch. G/L Acc. No.;Code20;
    TableRelation="IC G/L Account" }
    { 900 ; ;Qty. on Assembly Order;Decimal ;FieldClass=FlowField;
    CalcFormula=Sum("Assembly Line"."Remaining Quantity (Base)" WHERE (Document Type=CONST(Order),
    Type=CONST(Resource),
    ...
    Replacement code
    ...
    { 55 ; ;Automatic Ext. Texts;Boolean }
    { 56 ; ;No. Series ;Code10 ;TableRelation="No. Series";
    Editable=No }
    { 57 ; ;Tax Group Code ;Code10 ;TableRelation="Tax Group" }
    { 58 ; ;VAT Prod. Posting Group;Code10 ;TableRelation="VAT Product Posting Group" }

    // Add the following line.
    { 59 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 60 ; ;IC Partner Purch. G/L Acc. No.;Code20;
    TableRelation="IC G/L Account" }
    { 900 ; ;Qty. on Assembly Order;Decimal ;FieldClass=FlowField;
    CalcFormula=Sum("Assembly Line"."Remaining Quantity (Base)" WHERE (Document Type=CONST(Order),
    Type=CONST(Resource),
    ...
  8. Change the code in Fields in the Job table (167) as follows:
    Existing code
    ...
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 66 ; ;No. Series ;Code10 ;TableRelation="No. Series";
    Editable=No }
    { 67 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;

    // Delete the following lines.
    OnValidate=BEGIN
    IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
    END;

    // End of the lines.

    Editable=Yes }
    { 68 ; ;Bill-to Name 2 ;Text50 }
    { 117 ; ;Reserve ;Option ;OptionString=Never,Optional,Always }
    { 1000; ;WIP Method ;Code20 ;TableRelation="Job WIP Method".Code WHERE (Valid=CONST(Yes));
    OnValidate=VAR
    ...
    Replacement code
    ...
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 66 ; ;No. Series ;Code10 ;TableRelation="No. Series";
    Editable=No }
    { 67 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    Editable=Yes }
    { 68 ; ;Bill-to Name 2 ;Text50 }
    { 117 ; ;Reserve ;Option ;OptionString=Never,Optional,Always }
    { 1000; ;WIP Method ;Code20 ;TableRelation="Job WIP Method".Code WHERE (Valid=CONST(Yes));
    OnValidate=VAR
    ...
  9. Change the code in Fields in the Ship-to Address table (222) as follows:
    Existing code
    ...
    IF "Shipping Agent Code" <> xRec."Shipping Agent Code" THEN
    VALIDATE("Shipping Agent Service Code",'');
    END;
    }
    { 32 ; ;Place of Export ;Code20 }

    // Delete the following lines.
    { 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 54 ; ;Last Date Modified ;Date ;Editable=No }
    { 83 ; ;Location Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No)) }
    { 84 ; ;Fax No. ;Text30 }
    { 85 ; ;Telex Answer Back ;Text20 }
    { 91 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
    ...
    Replacement code
    ...
    IF "Shipping Agent Code" <> xRec."Shipping Agent Code" THEN
    VALIDATE("Shipping Agent Service Code",'');
    END;
    }
    { 32 ; ;Place of Export ;Code20 }

    // Add the following line.
    { 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 54 ; ;Last Date Modified ;Date ;Editable=No }
    { 83 ; ;Location Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No)) }
    { 84 ; ;Fax No. ;Text30 }
    { 85 ; ;Telex Answer Back ;Text20 }
    { 91 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
    ...
  10. Change the code in the ClearFields function in the Post Code table (225) as follows:
    Existing code
    ...
    CountryCode := PostCodeRec."Country/Region Code";
    County := PostCodeRec.County;
    END;
    END;

    // Delete the following lines.
    PROCEDURE ClearFields@1(VAR City@1000 : Text[30];VAR PostCode@1001 : Code[20];VAR County@1002 : Text[30]);
    BEGIN
    City := '';
    PostCode := '';
    County := '';
    END;

    // End of the lines.

    BEGIN
    END.
    }
    }
    ...
    Replacement code
    ...
    CountryCode := PostCodeRec."Country/Region Code";
    County := PostCodeRec.County;
    END;
    END;

    BEGIN
    END.
    }
    }
    ...
  11. Change the code in Fields in the Bank Account table (270) as follows:
    Existing code
    ...
    END;
    }
    { 24 ; ;Language Code ;Code10 ;TableRelation=Language }
    { 26 ; ;Statistics Group ;Integer }
    { 29 ; ;Our Contact Code ;Code10 ;TableRelation=Salesperson/Purchaser }

    // Delete the following lines.
    { 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 37 ; ;Amount ;Decimal ;AutoFormatType=1;
    AutoFormatExpr="Currency Code" }
    { 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
    CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Bank Account),
    No.=FIELD(No.)));
    ...
    Replacement code
    ...
    END;
    }
    { 24 ; ;Language Code ;Code10 ;TableRelation=Language }
    { 26 ; ;Statistics Group ;Integer }
    { 29 ; ;Our Contact Code ;Code10 ;TableRelation=Salesperson/Purchaser }

    // Add the following line.
    { 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 37 ; ;Amount ;Decimal ;AutoFormatType=1;
    AutoFormatExpr="Currency Code" }
    { 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
    CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Bank Account),
    No.=FIELD(No.)));
    ...
  12. Change the code in Fields in the Reminder Header table (295) as follows:
    Existing code
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 9 ; ;County ;Text30 }

    // Delete the following line.
    { 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 11 ; ;Language Code ;Code10 ;TableRelation=Language }
    { 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
    OnValidate=BEGIN
    IF CurrFieldNo = FIELDNO("Currency Code") THEN
    IF Undo THEN BEGIN
    ...
    Replacement code
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 9 ; ;County ;Text30 }

    // Add the following line.
    { 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 11 ; ;Language Code ;Code10 ;TableRelation=Language }
    { 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
    OnValidate=BEGIN
    IF CurrFieldNo = FIELDNO("Currency Code") THEN
    IF Undo THEN BEGIN
    ...
  13. Change the code in Fields in the Finance Charge Memo Header table (302) as follows:
    Existing code
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 9 ; ;County ;Text30 }

    // Delete the folloiwng lines.
    { 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '')THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 11 ; ;Language Code ;Code10 ;TableRelation=Language }
    { 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
    OnValidate=BEGIN
    IF CurrFieldNo = FIELDNO("Currency Code") THEN
    IF Undo THEN BEGIN
    ...
    Replacement code
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 9 ; ;County ;Text30 }

    // Add the following line.
    { 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 11 ; ;Language Code ;Code10 ;TableRelation=Language }
    { 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
    OnValidate=BEGIN
    IF CurrFieldNo = FIELDNO("Currency Code") THEN
    IF Undo THEN BEGIN
    ...
  14. Change the code in Fields in the Contact table (5050) as follows:
    Existing code
    ...
    { 10 ; ;Telex No. ;Text20 }
    { 15 ; ;Territory Code ;Code10 ;TableRelation=Territory }
    { 22 ; ;Currency Code ;Code10 ;TableRelation=Currency }
    { 24 ; ;Language Code ;Code10 ;TableRelation=Language }
    { 29 ; ;Salesperson Code ;Code10 ;TableRelation=Salesperson/Purchaser }

    // Delete the following lines.
    { 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
    CalcFormula=Exist("Rlshp. Mgt. Comment Line" WHERE (Table Name=CONST(Contact),
    No.=FIELD(No.),
    Sub No.=CONST(0)));
    Editable=No }
    ...
    Replacement code
    ...
    { 10 ; ;Telex No. ;Text20 }
    { 15 ; ;Territory Code ;Code10 ;TableRelation=Territory }
    { 22 ; ;Currency Code ;Code10 ;TableRelation=Currency }
    { 24 ; ;Language Code ;Code10 ;TableRelation=Language }
    { 29 ; ;Salesperson Code ;Code10 ;TableRelation=Salesperson/Purchaser }

    // Add the following line.
    { 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
    CalcFormula=Exist("Rlshp. Mgt. Comment Line" WHERE (Table Name=CONST(Contact),
    No.=FIELD(No.),
    Sub No.=CONST(0)));
    Editable=No }
    ...
  15. Change the code in Fields in the Contact Alt. Address table (5051) as follows:
    Existing code
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 9 ; ;County ;Text30 }

    // Delete the following lines.
    { 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 12 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
    { 13 ; ;Telex No. ;Text20 }
    { 14 ; ;Extension No. ;Text30 }
    { 15 ; ;Mobile Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
    { 16 ; ;Pager ;Text30 }
    ...
    Replacement code
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 9 ; ;County ;Text30 }

    // Add the following line.
    { 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 12 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
    { 13 ; ;Telex No. ;Text20 }
    { 14 ; ;Extension No. ;Text30 }
    { 15 ; ;Mobile Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
    { 16 ; ;Pager ;Text30 }
    ...
  16. Change the code in Fields in the Employee table (5200) as follows:
    Existing code
    ...
    { 20 ; ;Birth Date ;Date }
    { 21 ; ;Social Security No. ;Text30 }
    { 22 ; ;Union Code ;Code10 ;TableRelation=Union }
    { 23 ; ;Union Membership No.;Text30 }
    { 24 ; ;Gender ;Option ;OptionString=[ ,Female,Male] }

    // Delete the following lines.
    { 25 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 26 ; ;Manager No. ;Code20 ;TableRelation=Employee }
    { 27 ; ;Emplymt. Contract Code;Code10 ;TableRelation="Employment Contract" }
    { 28 ; ;Statistics Group Code;Code10 ;TableRelation="Employee Statistics Group" }
    { 29 ; ;Employment Date ;Date }
    { 31 ; ;Status ;Option ;OnValidate=BEGIN
    ...
    Replacement code
    ...
    { 20 ; ;Birth Date ;Date }
    { 21 ; ;Social Security No. ;Text30 }
    { 22 ; ;Union Code ;Code10 ;TableRelation=Union }
    { 23 ; ;Union Membership No.;Text30 }
    { 24 ; ;Gender ;Option ;OptionString=[ ,Female,Male] }

    // Add the following line.
    { 25 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 26 ; ;Manager No. ;Code20 ;TableRelation=Employee }
    { 27 ; ;Emplymt. Contract Code;Code10 ;TableRelation="Employment Contract" }
    { 28 ; ;Statistics Group Code;Code10 ;TableRelation="Employee Statistics Group" }
    { 29 ; ;Employment Date ;Date }
    { 31 ; ;Status ;Option ;OnValidate=BEGIN
    ...
  17. Change the code in Fields in the Alternative Address table (5201) as follows:
    Existing code
    ...
    { 13 ; ;Comment ;Boolean ;FieldClass=FlowField;
    CalcFormula=Exist("Human Resource Comment Line" WHERE (Table Name=CONST(Alternative Address),
    No.=FIELD(Employee No.),
    Alternative Address Code=FIELD(Code)));
    Editable=No }

    // Delete the following lines.
    { 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    }
    KEYS
    {
    { ;Employee No.,Code ;Clustered=Yes }
    }
    ...
    Replacement code
    ...
    { 13 ; ;Comment ;Boolean ;FieldClass=FlowField;
    CalcFormula=Exist("Human Resource Comment Line" WHERE (Table Name=CONST(Alternative Address),
    No.=FIELD(Employee No.),
    Alternative Address Code=FIELD(Code)));
    Editable=No }

    // Add the following line.
    { 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    }
    KEYS
    {
    { ;Employee No.,Code ;Clustered=Yes }
    }
    ...
  18. Change the code in Fields in the Union table (5209) as follows:
    Existing code
    ...
    { 9 ; ;Address 2 ;Text50 }
    { 10 ; ;County ;Text30 }
    { 11 ; ;Fax No. ;Text30 }
    { 12 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
    { 13 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }

    // Delete the following lines.
    { 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    }
    KEYS
    {
    { ;Code ;Clustered=Yes }
    }
    ...
    Replacement code
    ...
    { 9 ; ;Address 2 ;Text50 }
    { 10 ; ;County ;Text30 }
    { 11 ; ;Fax No. ;Text30 }
    { 12 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
    { 13 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }

    // Add the following line.
    { 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    }
    KEYS
    {
    { ;Code ;Clustered=Yes }
    }
    ...
  19. Change the code in Fields in the Responsibility Center table (5714) as follows:
    Existing code
    ...
    PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }

    // Delete the folloiwng lines.
    { 7 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    END;
    }
    // End of the lines.

    { 8 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
    { 9 ; ;Fax No. ;Text30 }
    { 10 ; ;Name 2 ;Text50 }
    { 11 ; ;Contact ;Text50 }
    { 12 ; ;Global Dimension 1 Code;Code20 ;TableRelation="Dimension Value".Code WHERE (Global Dimension No.=CONST(1));
    ...
    Replacement code
    ...
    PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }

    // Add the following line.
    { 7 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }

    { 8 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
    { 9 ; ;Fax No. ;Text30 }
    { 10 ; ;Name 2 ;Text50 }
    { 11 ; ;Contact ;Text50 }
    { 12 ; ;Global Dimension 1 Code;Code20 ;TableRelation="Dimension Value".Code WHERE (Global Dimension No.=CONST(1));
    ...
  20. Change the code in Fields in the Transfer Header table (5740) as follows:
    Existing code 1
    ...
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 9 ; ;Transfer-from County;Text30 }
    { 10 ; ;Trsf.-from Country/Region Code;Code10;

    // Delete the following lines.
    TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Trsf.-from Country/Region Code" <> xRec."Trsf.-from Country/Region Code") AND
    (xRec."Trsf.-from Country/Region Code" <> '')
    THEN
    PostCode.ClearFields("Transfer-from City","Transfer-from Post Code","Transfer-from County");
    END;
    }
    // End of the lines.

    { 11 ; ;Transfer-to Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No));
    OnValidate=VAR
    Location@1000 : Record 14;
    Confirmed@1001 : Boolean;
    BEGIN
    ...
    Replacement code 1
    ...
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 9 ; ;Transfer-from County;Text30 }
    { 10 ; ;Trsf.-from Country/Region Code;Code10;

    // Add the folloiwng line.
    TableRelation=Country/Region }

    { 11 ; ;Transfer-to Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No));
    OnValidate=VAR
    Location@1000 : Record 14;
    Confirmed@1001 : Boolean;
    BEGIN
    ...
    Existing code 2
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 18 ; ;Transfer-to County ;Text30 }

    // Delete the following lines.
    { 19 ; ;Trsf.-to Country/Region Code;Code10;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Trsf.-to Country/Region Code" <> xRec."Trsf.-to Country/Region Code") AND (xRec."Trsf.-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Transfer-to City","Transfer-to Post Code","Transfer-to County");
    END;
    }
    // End of the lines.

    { 20 ; ;Posting Date ;Date }
    { 21 ; ;Shipment Date ;Date ;OnValidate=BEGIN
    TestStatusOpen;
    TransferRoute.CalcReceiptDate(
    "Shipment Date",
    ...
    Replacement code 2
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 18 ; ;Transfer-to County ;Text30 }

    // Add the following line.
    { 19 ; ;Trsf.-to Country/Region Code;Code10;TableRelation=Country/Region }

    { 20 ; ;Posting Date ;Date }
    { 21 ; ;Shipment Date ;Date ;OnValidate=BEGIN
    TestStatusOpen;
    TransferRoute.CalcReceiptDate(
    "Shipment Date",
    ...
  21. Change the code in Fields in the Service Header table (5900) as follows:
    Existing code 1
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 86 ; ;Bill-to County ;Text30 }

    // Delete the following lines.
    { 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
    END;
    }
    // End of the lines.

    { 88 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
    ELSE IF (Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    END;
    ...
    Replacement code 1
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 86 ; ;Bill-to County ;Text30 }

    // Add the following line.
    { 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 88 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
    ELSE IF (Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    END;
    ...
    Existing code 2
    ...
    TestTableRelation=No }
    { 89 ; ;County ;Text30 }
    { 90 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    VALIDATE("Ship-to Country/Region Code");

    // Delete the following lines.
    IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
    PostCode.ClearFields(City,"Post Code",County);
    // End of the lines.

    END;
    }
    { 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
    ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
    OnValidate=BEGIN
    ...
    Replacement code 2
    ...
    TestTableRelation=No }
    { 89 ; ;County ;Text30 }
    { 90 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    VALIDATE("Ship-to Country/Region Code");
    END;
    }
    { 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
    ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
    OnValidate=BEGIN
    ...
    Existing code 3
    ...
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 92 ; ;Ship-to County ;Text30 }
    { 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN

    // Delete the following lines.
    IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");

    // End of the lines.

    IF "Ship-to Country/Region Code" <> '' THEN
    "VAT Country/Region Code" := "Ship-to Country/Region Code"
    ELSE
    "VAT Country/Region Code" := "Country/Region Code"
    END;
    ...
    Replacement code 3
    ...
    ValidateTableRelation=No;
    TestTableRelation=No }
    { 92 ; ;Ship-to County ;Text30 }
    { 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF "Ship-to Country/Region Code" <> '' THEN
    "VAT Country/Region Code" := "Ship-to Country/Region Code"
    ELSE
    "VAT Country/Region Code" := "Country/Region Code"
    END;
    ...
  22. Change the code in Fields in the Return Shipment Header table (6650) as follows:
    Existing code 1
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 86 ; ;Pay-to County ;Text30 }

    // Delete the following lines.
    { 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Pay-to Country/Region Code" <> xRec."Pay-to Country/Region Code") AND (xRec."Pay-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Pay-to City","Pay-to Post Code","Pay-to County");
    END;
    }
    // End of the lines.

    { 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
    ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Replacement code 1
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 86 ; ;Pay-to County ;Text30 }

    // Add the following line.
    { 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
    ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Existing code 2
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 89 ; ;Buy-from County ;Text30 }

    // Delete the following lines.
    { 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Buy-from Country/Region Code" <> xRec."Buy-from Country/Region Code") AND (xRec."Buy-from Country/Region Code" <> '') THEN
    PostCode.ClearFields("Buy-from City","Buy-from Post Code","Buy-from County");
    END;
    }
    // End of the lines.

    { 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
    ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Replacement code 2
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 89 ; ;Buy-from County ;Text30 }

    // Add the following line.
    { 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region }

    { 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
    ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Existing code 3
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 92 ; ;Ship-to County ;Text30 }

    // Delete the following lines.
    { 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
    END;
    }
    // End of the lines.

    { 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
    { 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.)) }
    { 97 ; ;Entry Point ;Code10 ;TableRelation="Entry/Exit Point" }
    { 98 ; ;Correction ;Boolean }
    { 99 ; ;Document Date ;Date }
    ...
    Replacement code 3
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 92 ; ;Ship-to County ;Text30 }

    // Add the following line.
    { 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
    { 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.)) }
    { 97 ; ;Entry Point ;Code10 ;TableRelation="Entry/Exit Point" }
    { 98 ; ;Correction ;Boolean }
    { 99 ; ;Document Date ;Date }
    ...
  23. Change the code in Fields in the Return Receipt Header table (6660) as follows:
    Existing code 1
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 86 ; ;Bill-to County ;Text30 }

    // Delete the following lines.
    { 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
    END;
    }
    // End of the lines.

    { 88 ; ;Sell-to Post Code ;Code20 ;TableRelation=IF (Sell-to Country/Region Code=CONST()) "Post Code"
    ELSE IF (Sell-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Sell-to Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Replacement code 1
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 86 ; ;Bill-to County ;Text30 }

    // Add the following line.
    { 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 88 ; ;Sell-to Post Code ;Code20 ;TableRelation=IF (Sell-to Country/Region Code=CONST()) "Post Code"
    ELSE IF (Sell-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Sell-to Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Existing code 2
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 89 ; ;Sell-to County ;Text30 }

    // Delete the following lines.
    { 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Sell-to Country/Region Code" <> xRec."Sell-to Country/Region Code") AND (xRec."Sell-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Sell-to City","Sell-to Post Code","Sell-to County");
    END;
    }
    // End of the lines.

    { 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
    ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Replacement code 2
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 89 ; ;Sell-to County ;Text30 }

    // Add the following line.
    { 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
    ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
    OnValidate=BEGIN
    PostCode.ValidatePostCode(
    "Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
    ...
    Existing code 3
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 92 ; ;Ship-to County ;Text30 }

    // Delete the following lines.
    { 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
    OnValidate=BEGIN
    IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
    PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
    END;
    }
    // End of the lines.

    { 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
    { 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point" }
    { 98 ; ;Correction ;Boolean }
    { 99 ; ;Document Date ;Date }
    { 100 ; ;External Document No.;Code35 }
    ...
    Replacement code 3
    ...
    END;

    ValidateTableRelation=No;
    TestTableRelation=No }
    { 92 ; ;Ship-to County ;Text30 }

    // Add the following line.
    { 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }

    { 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
    { 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point" }
    { 98 ; ;Correction ;Boolean }
    { 99 ; ;Document Date ;Date }
    { 100 ; ;External Document No.;Code35 }
    ...

Prerequisites

You must have Microsoft Dynamics NAV 2013 installed to apply this hotfix.

Removal information

You cannot remove this hotfix.

Status


Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.