Description of Update Rollup 2 for System Center 2012 R2 Virtual Machine Manager

Applies to: Microsoft System Center 2012 R2 Virtual Machine Manager

Summary


This article describes the issues that are fixed in Update Rollup 2 for Microsoft System Center 2012 R2 Virtual Machine Manager (VMM). There are two updates available for System Center 2012 R2 VMM. One update applies to the VMM management server, and the other applies to the VMM console. Additionally, this article contains installation instructions for Update Rollup 2 for System Center 2012 R2 Virtual Machine Manager.

Issues that this update fixes


Update Rollup 2 for System Center 2012 R2 Virtual Machine Manager resolves the following issues:
  • Files cannot be found on a network-attached storage device that uses NetApp storage and Server Message Block version 3 (SMBv3) protocol.
  • After an account's password is changed, the Scale-Out File Server provider goes into a "not responding" state.
  • VMM wipes the System Access Control List (SACL) configurations on ports.
  • When an uplink profile's name contains the "or" string, VMM console cannot show its details when it adds the uplink profile to a logical switch.
  • Dynamic disks cannot be used as pass-through disks.
  • When you create a standard virtual switch on a host without selecting the Allow management operating system to share this network adapter check box, the virtual switch is created. However, the virtual switch still binds to the host unexpectedly.
  • Network address translation (NAT) uses port number 49152 or a larger number, which Windows prohibits from being used by NAT.
  • When a virtual machine IP address type is static Out-of-Band and there is no IP address pool that is associated with the virtual machine network or the logical network, migration is complete with multiple errors.
  • If a highly available virtual machine is migrated from one node to another node by using Failover Cluster Manager, you receive an error message that indicates the absence of VHD files.
  • Some performance issues in VMM.
  • Connection with Operations Manager fails in a non-English environment.
  • After you upgrade VMM from System Center 2012 Service Pack 1 (SP1) to System Center 2012 R2, VLAN settings disappear and cannot be saved in the virtual machine.
  • Virtualization gateway could not be discovered by management packs.
  • The New-SCPhysicalComputerProfile Windows PowerShell cmdlet fails with a NullReferenceException exception.
  • Assume that you put a host into maintenance mode. When any highly available virtual machines cannot evacuate successfully, they are put into a saved state instead of into task failures.
  • Assume that you have a computer that is running VMware ESX Server to host virtual machines. Additionally, assume that cumulative progress for many applications, scripts or actions (that is reported by guest agent) becomes large. In this situation, all deployments time out, as the guest agent cannot communicate to the server successfully.
  • You cannot deploy a service template to VMware ESX 5.1 hosts. Additionally, you receive an error 22042 and a TimeoutWhileWaitingForVmToBootException (609) exception.
  • When you migrate a virtual machine together with Out-of-Band checkpoints, database corruption occurs.
  • Pass-through disks are not updated correctly in the database after they are refreshed from an Out-of-Band migration.
  • Assume that hosts establish a Common Information Model (CIM) session that can send policies to the host after the Hyper-V Network Virtualization initialization. Additionally, assume that a policy-sending activity is initiated before the CIM session creation is completed. In this situation, policies are stuck in the sending queue, and the host does not receive any Hyper-V Network Virtualization policies.
  • Communication is broken in Hyper-V Network Virtualization.
  • When you use a same user name for Run As Accounts in guest customization, a conflict occurs.
  • You cannot use a parameter together with .sql scripts for a Run As Account during a service installation.
  • You deploy a template that uses empty classification to a cloud. However, the template does not respect storage classifications that are set on the cloud.
  • When Windows Server fast file copy cannot deploy files successfully, the Background Intelligent Transfer Service (BITS) fallback task continues using the fast file copy credentials.

Resolution


Update packages are available from Microsoft Update or by manual download.

Microsoft Update

To obtain and install an update package from Microsoft Update, follow these steps on a computer that has an applicable System Center 2012 R2 component installed:
  1. Click Start, and then click Control Panel.
  2. In Control Panel, double-click Windows Update.
  3. In the Windows Update window, click Check Online for updates from Microsoft Update.
  4. Click Important updates are available.
  5. Select the update rollup packages that you want to install, and then click OK.
  6. Click Install updates to install the selected update packages.

Manual download of the update packages

Go to the following website to manually download the update packages from the Microsoft Update Catalog:
Download Download the server update package now.
Download Download the admin console update package now.

Installation instructions

To manually install the update packages, run the following command from an elevated command prompt:
msiexec.exe /update <packagename> 
For example, to install the Update Rollup 2 package for a System Center 2012 R2 Virtual Machine Manager server (KB2932926), run the following command:
msiexec.exe /update kb2932926_vmmserver_amd64.msp 
Important After you install the update package, you must apply the following SQL script on your Virtual Machine Manager Microsoft SQL Server database for Update Rollup 2 to function correctly.
/* script starts here */
ALTER Procedure [dbo].[prc_RBS_UserRoleSharedObjectRelation_Insert]
(
@ID uniqueidentifier,
@ObjectID uniqueidentifier,
@ObjectType int,
@RoleID uniqueidentifier,
@UserOrGroup varbinary (85),
@ForeignAccount nvarchar (256),
@IsADGroup bit,
@ExistingID uniqueidentifier = NULL OUTPUT
)
AS
SET NOCOUNT ON
SELECT @ExistingID = [ID] FROM [dbo].[tbl_RBS_UserRoleSharedObjectRelation]
WHERE [ObjectID] = @ObjectID AND [RoleID] = @RoleID
AND
-- Select owner OR Select all which matches ForeignAccount or UserOrGroup OR
-- both ForeignAccount and UserOrGroup is NULL
(([UserOrGroup] = @UserOrGroup OR [ForeignAccount] = @ForeignAccount) OR
([UserOrGroup] IS NULL AND @UserOrGroup IS NULL AND [ForeignAccount] IS NULL AND @ForeignAccount IS NULL))
/* Ignore duplicate entries */
IF (@ExistingID IS NULL)
BEGIN
INSERT [dbo].[tbl_RBS_UserRoleSharedObjectRelation]
([ID]
,[ObjectID]
,[ObjectType]
,[RoleID]
,[UserOrGroup]
,[ForeignAccount]
,[IsADGroup]
,[IsOwner]
)
VALUES
(
@ID,
@ObjectID,
@ObjectType,
@RoleID,
@UserOrGroup,
@ForeignAccount,
@IsADGroup,
0
)
END
SET NOCOUNT OFF
RETURN @@ERROR
GO


ALTER PROCEDURE [dbo].[prc_WLC_IsVHDSharedByAnotherVmOnHost]
@HostId [uniqueidentifier],
@VHDId [uniqueidentifier],
@VMId [uniqueidentifier]
AS
BEGIN
DECLARE @error int
SET @error = 0

SET NOCOUNT ON;

SELECT TOP 1 1 FROM dbo.[fn_WLC_GetParentChildRelationForVHD](@VHDId) vcr
JOIN dbo.tbl_WLC_VDrive vd ON
vcr.VHDId = vd.VHDId
JOIN dbo.tbl_WLC_VObject vo ON
vo.ObjectId = vd.ParentId
JOIN dbo.tbl_WLC_VMInstance vi ON
vo.ObjectId = vi.VMInstanceId
WHERE
vo.HostId = @HostId
AND
vo.ObjectId <> @VMId
AND
vi.RootVMInstanceId <> @VMId

SET @error = @@ERROR
SET NOCOUNT OFF
RETURN @error
END
GO


IF EXISTS (SELECT * FROM dbo.sysobjects
WHERE id = OBJECT_ID(N'prc_ADHC_HostDisk_GetByClusterDiskIdAndHostId')
AND OBJECTPROPERTY(id, N'IsProcedure') = 1)
DROP PROCEDURE dbo.prc_ADHC_HostDisk_GetByClusterDiskIdAndHostId
GO

CREATE PROCEDURE dbo.prc_ADHC_HostDisk_GetByClusterDiskIdAndHostId
(
@ClusterDiskID guid,
@HostID guid
)
AS

DECLARE @error int
SET @error = 0

SET NOCOUNT ON

SELECT
[DiskID],
[Signature],
[UniqueID],
[HostID],
[LibraryServerID],
[StArrayID],
[LastUpdatedDateTime],
[DeviceID],
[Index],
[Capacity],
[IsPassThroughCapable],
[IsSanAttached],
[ClusterDiskID],
[Location],
[StorageLUNID],
[SMLunId],
[SMLunIdFormat],
[SMLunIdNamespace],
[SANType],
[Bus],
[Lun],
[Target],
[Port],
[IsVHD],
[StClassificationId]
FROM dbo.tbl_ADHC_HostDisk
WHERE
[HostID] = @HostID
AND
[ClusterDiskID] = @ClusterDiskID

SELECT @error = @@ERROR

SET NOCOUNT OFF

RETURN @error
GO
/* script ends here */