The following file is available for download from the Microsoft Download Center:
For additional information about how to download Microsoft Support files, click the following article number to view the article in the Microsoft Knowledge Base:
- dnslint /d: This diagnoses potential causes of "lame delegation" and other related DNS problems.
- dnslint /ql: This verifies a user-defined set of DNS records on multiple DNS servers.
- dnslint /ad: This verifies DNS records specifically used for Active Directory replication.
[/c [smtp,pop,imap]] [/no_open] [/r report_name]
[/t] [/test_tcp] [/s DNS_IP_address] [/v] [/y]
You use the /d switch to request domain name tests. This switch is useful when you troubleshoot lame delegation issues.
- You must specify a domain name to test.
- You cannot use the /d switch with the /ad switch.
- The /ad switch resolves DNS records that are used for AD forest replication.
- By default, the local system's LDAP service is used.
- You can specify a remote LDAP server IP address (optional).
- Only valid IP addresses are accepted. Names are not accepted.
Typically, this is an Active Directory domain controller.
- You must use the /ad switch with the /s option, where /s specifies the IP address of a DNS server that is authoritative for the _msdcs zone in the AD forest root.
- You cannot use the /ad switch with /d or /c.
- The /ql switch sends the DNS queries specified in a text input file
- You must specify the path and name of the input file.
- the /ql switch supports A, PTR, CNAME, SRV and MX record queries.
- You create a sample input file by running the following:dnslint /ql autocreate
- You cannot use the /ql switch with /d, /ad, or /c.
- You cannot use /d, /ad, and /ql together.
- You cannot use /c together with /ad or /ql.
- When you use /ad, you must also specify /s.
Use /c to request connectivity tests on e-mail servers.
- The /c switch tests SMTP, POP, and IMAP ports on e-mail servers found.
- By default, all three (the SMTP, POP, and IMAP ports) are tested. You can specify one or a combination. To do this, use a comma-separated list: /c pop,imap,smtp.
Use the /r switch to specify the name of the report file that is created.
- The .htm file name extension is automatically added to report names.
- The report is created in HTML format. The default name is Dnslint.htm
- The default location is the current directory.
- You can specify DNS server IP address instead of querying InterNIC for one.
- The /s switch starts checking DNS records by using the supplied IP address.
- Only valid IP addresses are accepted. Names are not accepted.
- Use this option to check domain names that are not supported by InterNIC.
- When you use /ad, you must use /s to specify a DNS server that is authoritative for the _msdcs subdomain in the root domain of the AD forest.
- When you use /ad, you can run /s localhost to determine whether the local system can resolve records that are found in the AD tests.
- The text file shares the same name as the .htm report, but it has a .txt file name extension.
- The text file created in the same directory as the .htm report file.
- By default, only UDP port 53 is tested.
- The /test_tcp option checks whether TCP port 53 is responding to queries.
- The /test_tcp option cannot be used with /ql.
Use /y to overwrite an existing report file without being prompted. The /y switch is useful in scripts.
To run DNSLint, you must use one of the three following parameters:
- Use /d for domain name tests
- Use /ad for Active Directory replication tests.
- Use /ql for tests specified in a query list.
Use the /ad (Active Directory test) switch to test the DNS records responsible for Active Directory forest replication. After the /ad switch, specify the IP address of an LDAP server that is used for this test. Typically, this is an Active Directory domain controller. If DNSLint is running on a domain controller, no IP address is necessary because the default value for this switch is 127.0.0.1.
Use the /ql (query list test) switch to test the DNS records specified in a text input file. Specify the full path and name of the text input file immediately after the switch. Run dnslint /ql autocreate to generate a sample text input file called In-dnslint.txt. This file contains an explanation on the required format. You can use this file as a template to create other input files.
More optional switches
The /v (verbose) switch turns "verbose mode" on. With this switch on, DNSLint will output the steps it is taking to collect data to the screen. You can send this output to a file. For example, dnslint /v /d msn.com.
By default, the name of the report that DNSLint generates is Dnslint.htm. With the /r (report) switch, you can specify the name and location of the report file that DNSLint generates. You can give the report file the same name as the domain name or DNS server that was tested. The ".htm" file name extension is appended to the report name automatically because the report is in HTML format.
By default, DNSLint tries to automatically open the report file after it is generated, by using whatever program is associated with the report file's .htm file. Typically, Microsoft Internet Explorer is associated with the .htm extension. There is no way to change the report format to something other than HTML by using DNSLint.
To define the location to which the report file is written, specify the full path and name of the report file. DNSLint supports both local drives and Universal Naming Convention (UNC) paths. For example, the command dnslint /d msn.com /r c:\reports\reskit creates a report called Reskit.htm in the C:\Reports folder. The command dnslint /d mydom.local /r \\server1\reports\mydom creates a report on the remote system called server1 in the Reports share. The report name is Mydom.htm.
If you specify the /t (text) switch, DNSLint generates a text report and an HTML report. The text report uses the same name as the .htm report except that its file name extension is .txt. The file is created in the same folder as the .htm file. For example, the command dnslint /d msn.com /r c:\reports\reskit /t creates two reports in the C:\Reports folder. One report is called Reskit.htm and the other is called Reskit.txt.
By default, when DNSLint detects that a report file with the same name as the one that it is going to generate already exists in the target folder, DNSLint prompts you to overwrite the file. With the /y option, DNSLint can overwrite an existing report file without prompting you for permission. Both the .htm file and the optional .txt file are overwritten when you use this option.
The command dnslint /y /d msn.com /r c:\reports\reskit /t creates two reports in the C:\Reports folder. One report is called Reskit.htm and the other is called Reskit.txt. Existing report files are overwritten without prompting you.
The /no_open switch prevents DNSLint from automatically opening the report after it is generated. This option is useful when you use DNSLint in scripts when you do not want to review the reports immediately or review the reports from the system that DNSLint was run from. For example, the command dnslint /y /d msn.com /no_open generates a report called Dnslint.htm that overwrites a pre-existing report with the same name, without prompting the user. DNSLint does not automatically open the report when it is completed.
Use the /test_tcp (test TCP port 53) option to request that TCP port 53 be tested when /d is used. Many DNS servers on the Internet today do not accept DNS queries on TCP port 53, to avoid possible attacks on that port. By default, only UDP port 53 is tested when DNSLint is run. Specifying the /test_tcp option will get DNSLint to send a single DNS query by TCP and report whether a response was received.
You can use the /test_tcp option with /d and /ad. However, you cannot use the /test_tcp option with /ql or the /ad /s localhost combination. With the /ql function, TCP port 53 can be tested directly from the input file. The /ad /s localhost function tests whether the locally configured DNS servers can resolve DNS records used for Active Directory Forest replication. You can test TCP port 53 connectivity by using /ad /s ip_addr instead, where ip_addr is the IP address of a DNS server that is authoritative for the _msdcs zone in the root of the Active Directory domain.
DNSLint reports the state that each port is in: "Listening", "Not Listening", or "No Response." If DNSLint finds that a port is Listening, it also returns the response from the port if any is returned. For example, if an SMTP port is listening, it typically returns a response that is consistent with the SMTP protocol specification, such as the following:
220 mailsrv.reskit.com Microsoft ESMTP MAIL Service, Version: 5.0.2195.3705 ready at Mon, 13 May 2002 17:08:36 -0700
When a port is reported as "Not Listening", this indicates that the e-mail server being queried has responded with a TCP packet with the Reset flag set. This indicates that there is no service or program listening on the port.
"No Response" is reported when the target e-mail server does not respond to the connection attempt. Assuming that the target server is operational and running, this indicates that the port is being filtered on the target server or somewhere between the client that is running DNSLint and target server.
The command dnslint /y /v /c /d msn.com generates a report called Dnslint.htm that overwrites a pre-existing report with the same name, without prompting the user. Because the
/c option is specified, an extra section is appended to the bottom of the standard DNSLint report:
E-mail server: smtp-gw-4.msn.com
IP address: 184.108.40.206
220 cpimssmtpa18.msn.com Microsoft ESMTP MAIL Service, Version:
5.0.2195.4905 ready at Tue, 14 May 2002 09:26:06 -0700
POP response: NO RESPONSE (possibly filtered)
IMAP response: NO RESPONSE (possibly filtered)
One or more POP servers did not respond.
One or more IMAP servers did not respond.
When a target e-mail server does not respond to a connection attempt on one of its e-mail ports, DNSLint retries the connection three times. This is standard behavior for a TCP client. Because DNSLint waits for three separate TCP connection attempts to time out before DNSLint indicates that there was "No Response", this process can slow down the completion of the report. To optimize DNSLint operation, you can specify which e-mail port or ports you want to check instead of checking all three all the time.
By default, when the /c option is specified, all three TCP ports (25, 110, 143) are checked. But you can specify which ports to check after the /c option. Specify a comma-delimited list immediately after the /c option. Specify valid ports only: smtp,pop,imap. Any combination of these three ports works. For example, the command dnslint /d reskit.com /c smtp specifies that only the SMTP port (TCP port 25) should be checked.
The command dnslint /d reskit.com /c pop,smtp specifies that only the SMTP port (TCP port 25) and POP port (TCP port 110) should be checked.
The command dnslint /d reskit.com /c imap,pop specifies that only the IMAP port (TCP port 143) and POP port (TCP port 110) should be checked.
You can use the /s (server) switch with the /d and /ad functions. The /s switch has several purposes, but it only takes one type of data, a valid IP address of a DNS server (with one exception).
When you specify /d, the /s option bypasses the InterNIC Whois lookup that DNSLint performs by default. As a result, DNSLint can run tests on private networks and on domain names that are deeper than the second-level domains on the Internet. DNSLint can also test domain names that are not supported by InterNIC. At the time this article was written, InterNIC supported Whois lookups for the following domains: .biz, .com, .coop, .edu, .info, .int, .museum, .net, and .org.
When you use /ad, the /s switch is used to specify the IP address of a DNS server that is authoritative for the subdomain where DNS records used for Active Directory forest replication are registered. Typically, this is the _msdcs subdomain under the root of the Active Directory forest. For example, if the root of the Active Directory forest is called myad.reskit.com, the DNS server that hosts this domain may also be authoritative for the _msdcs.myad.reskit.com zone, where the DNS records used in Active directory replication are registered. Alternatively, the _msdcs.myad.reskit.com zone may be delegated to a different DNS server. However the DNS infrastructure has been designed, the /s option is used to specify a DNS server that is authoritative for the _msdcs.myad.reskit.com zone.
The /s option must specify a valid IP address. The only exception to this rule is the following combination:
Typically, not all of the local system's configured DNS servers are queried during this process. Default DNS client resolver behavior is observed, so if the DNS server at the top of the local system's DNS Server list does not respond, the next server in the list is used.
For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
Article ID: 321045 - Last Review: Jan 7, 2008 - Revision: 1