To configure Windows Firewall, use Security Center in Control Panel, or open the firewall itself from Control Panel. Windows Firewall has three modes:
- On (recommended)
- Off (not recommended)
- Don't allow exceptions
- Don't allow exceptions
Don't allow exceptionsAfter you select Don't allow exceptions, Windows Firewall blocks all requests to connect to your computer. Blocked requests include requests to connect from programs or services that are listed on the
Exceptions tab. Windows Firewall also blocks file and printer sharing and the discovery of network devices.
You may find it useful to use Windows Firewall with no exceptions when you connect to a public network, such as a public network at an airport or hotel. This setting can help protect your computer because it blocks all attempts to connect to your computer. When you use Windows Firewall with no exceptions, you can still view Web pages, send and receive e-mail messages, or use an instant messaging program. You can manually set the Don't allow exceptions mode. However, Windows or a program can also configure this automatically if a security issue is encountered with a service or program that is listening on the computer.
ExceptionsYou can add program and port exceptions on the
Exceptions tab. This makes it possible for the program or port that you list to receive certain types of inbound traffic.
For each exception, you can set a scope for the exception. For home and small office networks, we recommend that you set the scope to the local network only where you can do this. If you set the scope to the local network only, computers on the same subnet can connect to the program on the computer. However, traffic that originates from a remote network is dropped.
Note To use exceptions in large networks, you may have to add an address in your list of exceptions. You can also use the Any Computer setting if a corporate firewall is in effect. The exception settings specify the set of computers that this port or program is open for. The following lists the settings and a description of the mode of access:
|Any computer (including those on the Internet)||The program can communicate with anyone that initiates a connection|
|My network (subnet) only||Local Subnet Only -The program can communicate only with those requests generated on the computers local subnet|
|Custom list||Specify address based on the mask that is provided.|
If you want to add a network, add it with the correct subnet mask. For example, 192.168.100.0/255.255.255.0
If you want to add a single address, use the whole address, and an all 255 subnet mask. For example, 192.168.100.7/255.255.255.255
This indicates to the firewall that all the address represents the network Therefore, only this single IP address will be permitted.
AdvancedBy using the Advanced tab for the Windows Firewall properties, you can configure the following settings:
- Network Connection Settings - This setting configures specific rules that apply to each network interface.
- Security Logging - This setting configures security logging.
- ICMP - This setting configures rules that apply to Internet Control Message Protocol (ICMP) traffic and that are used for error and status information transmission.
- Default settings - This setting can be used to restore Windows Firewall to a default configuration.
- Right-click My Computer, and then click
- Expand Services and Applications, and then click Services.
- In the right pane, right-click Windows Firewall/Internet Connection Sharing (ICS) service, and then click
- To restart the Windows Firewall/Internet Connection Sharing (ICS) service, right-click the service, and then click Start.