In addition, this article can help you troubleshoot some common error messages that you may receive when you install Windows XP SP3.
Prerequisites to install Windows XP SP3Before you start to install Windows XP SP3, make sure that your computer meets the following prerequisites:
- Before you download or install Windows XP SP3, first check hard-disk space
Depending on where you obtain Windows XP SP3, you will have to have a minimum amount of space free on the system disk.
947311 The hard disk space requirements for Windows XP Service Pack 3
- To install Windows XP SP3 from the Microsoft Download Center, we recommend that you have a minimum of 1,500 megabytes (MB) of free space on the system disk.
- To install Windows XP SP3 from a shared network folder, we recommend that you have about 1,100 MB of free space.
- To install Windows XP SP3 from a CD, we recommend that you have about 1,765 MB of free space.
- If you have the following updates on your computer, remove them
Windows XP SP3 cannot be installed if you have the following updates installed on your computer:
- Microsoft Shared Computer Toolkit
- Remote Desktop Connection (RDP) 6.0 MUI pack (Update 925877 for Windows XP)
949388 Windows XP Service Pack 3 installation fails with an error message, and the following error is logged in the service pack installation log: "8007F0F4 - STATUS_PREREQUISITE_FAILED"
- Click Start, and then click Run.
- In the Open box, type appwiz.cpl.
- Click Microsoft Shared Computer Toolkit or Remote Desktop Connection.
- Click Remove.
- If you have a third-party wireless network adapter, make sure that it is supported
If you have a third-party wireless network adapter, make sure that the device is supported by Windows XP SP3, or make sure that the manufacturer of your wireless network adapter has new drivers available that support Windows XP SP3 before you perform the installation. If you are not sure, contact the manufacturer of your wireless network adapter.
- If you are running antivirus software, disable it
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
Although disabling your antivirus software is not usually recommended, some antivirus software prevents certain system files from being changed. This may cause the Windows XP SP3 installation to fail. To make sure that you can successfully install Windows XP SP3, temporarily disable your antivirus software including any antispyware and third-party firewall programs. To do this, right-click your antivirus program icon, and then click Disable. The antivirus program icon typically appears in the lower-right corner of the computer screen.
Important Make sure that you enable the antivirus software after Windows XP SP3 is installed.
Note An antivirus program is designed to help protect your computer from viruses. You must not download or open files from sources that you do not trust, visit Web sites that you do not trust, or open e-mail attachments when your antivirus program is disabled. For more information about computer viruses, click the following article number to view the article in the Microsoft Knowledge Base:129972 Computer viruses: description, prevention, and recovery
Recommended steps before you install Windows XP SP3Before you start to install Windows XP SP3, we recommend that you also take the following steps:
- Perform a full backup of the files that you have on your computer to an external location
We recommend that you perform a full backup of the files that you have on your computer to an external location, such as an external hard disk, DVD, CD, USB flash drive, or network folder. You can use the Backup and Restore Wizard to back up documents, pictures, and other files. For more information, visit the Microsoft Help and Support Center Web site, and see the "Backing up files and folders" section or view the following knowledge base article:308422 How to use the Backup utility to back up files and folders in Windows XP Home Edition
- If you are running Windows XP Professional, create an Automated System Recovery (ASR) set
Note If your computer is running Windows XP Home Edition, ignore this step. ASR is not available for Windows XP Home Edition.
If your computer is running Windows XP Professional, we recommend that you create an Automated System Recovery (ASR) set before you start the installation. This helps you repair your setup if the installation fails. To create an Automated System Recovery set by using Backup, follow these steps:
- Open Backup.
By default, the Backup or Restore Wizard starts, unless it is disabled. You can use the Backup or Restore Wizard to create an Automated System Recovery (ASR) set.
- Click the Advanced Mode link on the Backup or Restore Wizard.
- On the Tools menu, click ASR Wizard.
- Follow the instructions that appear on your screen.
Important You will need a blank 1.44 MB floppy disk to save the system settings and media to contain the backup files.
- Open Backup.
- Review your version of Internet Explorer. To determine your browser version, click About Internet Explorer on the Help menu.
If you are running Internet Explorer 7 or Internet Explorer 8, be aware that you cannot revert to Internet Explorer 6 after the upgrade to Windows XP SP3.
If you feel you want to use Internet Explorer 6, uninstall Internet Explorer 7 or Internet Explorer 8 before you upgrade to Windows XP SP3. For more information, click the following article number to view the article in the Microsoft Knowledge Base:927177 How to uninstall Internet Explorer 7To install Internet Explorer 7 after you upgrade to Windows XP SP3, visit the following Microsoft Web site:
Steps that are required before you install Windows XP SP3Before you install Windows XP SP3, make sure that you follow these steps:
- Start your computer, and then log on as an administrator.
Note Administrators have complete and unrestricted access to the operating system and to its settings. You can use the Administrator user name to log on, or you can use another account that is a member of the Administrators group. To determine the groups to which you belong, click Start, click Control Panel, and then click User Accounts. If you need help to verify that you are an administrator on the computer, click the following link to verify your operating environment:
- If your computer is running on battery power, plug it in so that your computer does not lose power during the installation.
- If your computer has multiple user accounts that can log on to your computer at the same time and you use Fast User Switching, make sure that all other users are logged off before you install Windows XP SP3. For more information, visit the Windows XP Help and Support Center Web site and see "Fast User Switching."
- Exit all open programs.
Troubleshooting for beginning to intermediate usersIf you receive error messages during the installation of Windows XP SP3, use the information in this section to troubleshoot the installation. This section is intended for beginning to intermediate users. If you are not comfortable with troubleshooting steps, you may want to ask a friend for help.
Not enough hard disk spaceWhen you try to install Windows XP SP3, you may receive the following error message:
You do not have enough free disk space on %SystemDrive% to install Service Pack 3.
Not enough hard disk space to archive filesWhen you try to install Windows XP SP3, you may receive the following error message:
You do not have enough free disk space on %SystemDrive% to archive the uninstall files.
Another update is in progressWhen you try to install Windows XP SP3, you may receive following error message:
Prerequisites failedWhen you try to install Windows XP SP3, you may receive one of the following error messages:
- Message 1 This Service Pack requires the machine to be on AC Power before setup starts.
- Message 2Service Pack 3 Setup has been canceled because Microsoft Shared Computer Toolkit for Windows XP is not compatible with this version of Windows. Before you can continue, you must: 1) Uninstall Microsoft Shared Computer Toolkit 2) (Optional) Install Windows SteadyState, the newer version of Microsoft Shared Computer Toolkit. For more detailed information, go to the Shared Access page on the Microsoft Web site.
- Message 3Service Pack 3 Setup has been canceled because Windows XP SP3 cannot be installed over RDP 6.0 MUI PACK (Update for Windows XP (KB925877)). Before you can continue, you must Uninstall KB925877.
- Message 4Microsoft Windows XP Professional Service Pack 3 cannot be applied to Windows Fundamentals for Legacy PCs (WinFLP). A unique SP3 update package for WinFLP will be made available at download.microsoft.com.
- Message 5Microsoft Windows XP Professional Service Pack 3 cannot be applied to Windows Embedded for Point of Service (WEPOS). A unique SP3 update package for WEPOS will be made available at download.microsoft.com.
- Message 6Setup cannot continue because one or more prerequisites required to install Service Pack 3 failed. For More details check the Log File Drive_Letter :\windows\svcpack.log.
If these troubleshooting steps did not resolve the issue, go to the "Next Steps" section for information about how to contact Support.
Troubleshooting for advanced usersIf you receive error messages during the installation of Windows XP SP3, use the information in this section to troubleshoot the installation. This section is intended for advanced users only.
Access DeniedWhen you try to install Windows XP SP3, you may receive one of the following error messages:
Insufficient permissionsWhen you try to install Windows XP SP3, you may receive the following error message:
Internal ErrorWhen you try to install Windows XP SP3, you may receive the following error message:
Errors that are related to the Cryptographic serviceYou may experience one or more of the following symptoms:
- You may receive the following error message when you try to install a program or update: Digital Signature Not FoundIf you click More Info, you receive the following error message:
The Microsoft digital signature affirms that software has been tested with Windows and that the software has not been altered since it was tested.
The software you are about to install does not contain a Microsoft digital signature. Therefore, there is no guarantee that this software works correctly with Windows.
Name of software package
If you want to search for Microsoft digitally signed software, visit the Windows Update Web site at http://update.microsoft.com to see if one is available.
Do you want to continue the installation?Microsoft WindowsAfter you click
The signature on the software package you want to install is invalid. The software package is not signed properly.
OK in the first error message dialog box, you may receive a message that states that the installation was successful, or you may receive the following error message:Name of Update Package
The cryptographic operation failed due to a local security option setting.
- When you try to install an update or a service pack, you may receive an error message that resembles one of the following:
- Name of Update Package
Setup could not verify the integrity of the file Update.inf. Make sure the Cryptographic service is running on this computer.
- Failed to install catalog files.
- The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important.)
This software will not be installed. Contact your system administrator.
- The software you are installing has not passed Windows Logo testing to verify its compatibility with this version of Windows. (Tell me why this testing is important.)
- Service Pack 1 Setup could not verify the integrity of the file. Make sure the Cryptographic service is running on this computer
- When you try to install a package from the Windows Update Web site or from the Microsoft Update Web site, you may receive a message that resembles the following: The software has not passed Windows logo testing and will not be installed.
Troubleshooting error codes that appear in the update log or in the service pack log filesIf you experience a Windows XP SP3 installation failure, an error code is typically recorded in the %windir%\WindowsUpdate.log file or in the %windir%\svcpack.log file. Typically, these files are located in the C:\Windows directory. The following table shows some most common error codes that may appear in these log files. The Microsoft Knowledge Base articles offer potential resolutions for each of these errors.
|Error code that appears in the WindowsUpdate.log file||Error Code description (as it may appear in the Svcpack.log file)||Knowledge Base article that describes potential resolutions|
- Searchable Knowledge Base: Search technical support information and self-help tools for Microsoft products.
- Solution Centers: View product-specific frequently asked questions and support highlights.
- Other Support Options: Use the Web to ask a question, contact Microsoft Customer Support Services, or provide feedback.
Article ID: 950717 - Last Review: May 22, 2013 - Revision: 1