Event IDs 4307 and 4311 Occur After Disabling WINS Bindings
This article was previously published under Q123981
This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.
After you attempt to disable the WINS bindings for a network interface card(NIC) in the Control Panel Network dialog box, Event Viewer reports twoerrors:
Event ID 4307: Initialization failed because the transport refused to open initial Addresses.
Event ID 4311: Initialization failed because the driver device could not be created.
These errors occur when you disable all WINS related bindings and ShowBinding For is set to < All Components >. They may also occur due to anincorrect order of the bindings.
To correct this problem:
- In the Show Bindings For list box, choose WINS Client(TCP/IP).
- Select the WINS binding shown and choose Enable.
- Verify that the WINS bindings are above any RAS bindings in the list (lower all RAS bindings to the bottom of the list).
- Choose OK and then choose OK again.
If enabling the bindings does not correct the problem, remove the TCP/IPprotocol completely, and then reinstall it.
Article ID: 123981 - Last Review: 10/31/2006 22:43:26 - Revision: 3.1
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Server 3.5