STOP 0x0000001E or System Hangs When Mirroring Seagate ST32550

This article was previously published under Q137148
This article has been archived. It is offered "as is" and will no longer be updated.
SYMPTOMS
When you perform mirroring on a FAT or NTFS system partition on a SeagateST32550N (Firmware Revision 14) hard disk connected to a DPT 2022 or 2122SCSI controller (Firmware Revision 06B0 BIOS 2.D7), the following STOPerror message appears in Windows NT 3.5:
STOP: 0x0000001E
KMODE_EXCEPTION_NOT_HANDLED

When you perform the same procedure above in Windows NT 3.51, the WindowsNT stops responding (hangs).
CAUSE
This problem occurs when Revision 14 of the Seagate hard-disk firmware isused.
RESOLUTION
Upgrade the firmware of the Seagate 32550N hard disk to Revision ASA2 16.
prodnt drive hdd adapter trap 0x1e 0x01e
Properties

Article ID: 137148 - Last Review: 02/24/2014 08:21:59 - Revision: 4.1

  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
  • kbnosurvey kbarchive KB137148
Feedback