Drive Letters Assigned In Disk Administrator Disappear On Restart
In Disk Administrator, the SCSI drive is shown as formatted with eitherFAT or NTFS but the drive letter that was assigned earlier is now gone.The drive letter no longer appears for this drive in File Manager.
- An IDE device attached to the computer is the boot device AND where the SCSI device does not contain the operating system files AND where the SCSI device is configured for BOOT in the Control Panel Devices tool.
- On Compaq systems that require a Compaq SSD, drive letters assigned by Disk Administrator may not be retained after rebooting the machine if the latest Compaq SSD has not been applied.
- Click the Start button, point to Settings, and click Control Panel.
- Double-click the Devices icon, and change the SCSI device driver from a Startup setting of BOOT to a Startup setting of SYSTEM. For example, if using an Adaptec 2940 series SCSI controller, set the AIC78xx device by clicking the Startup button, selecting SYSTEM, rather than BOOT, and then clicking OK.
- If running Windows NT V3.5x, then change the SCSIDISK device driver from Startup setting of BOOT to a Startup setting of SYSTEM.
- Close Control Panel.
- Open Disk Administrator, select the SCSI drive, and then assign a drive letter. Close Disk Administrator.
- Restart the computer. Verify that the drive letter still exists in File Manager.
Download and install the latest appropriate SSD from Compaq. Information onand locations of SSDs may be found on Compaq's ftp site:
Αναγνωριστικό άρθρου: 158362 - Τελευταία αναθεώρηση: 11/01/2006 04:54:14 - Αναθεώρηση: 2.1
- kbenv kbprb kbsetup KB158362