You are currently offline, waiting for your internet to reconnect

Your browser is out-of-date

You need to update your browser to use the site.

Update to the latest version of Internet Explorer

Terminal Server Error Messages: 3000 to 3099

This article was previously published under Q186543
SUMMARY
This article describes Terminal Server error messages 3000 to 3099.
MORE INFORMATION

Error 3000

Drive *** is nearly full. *** bytes are available. Please warn users and delete unneeded files.

Error 3001

*** errors were logged in the last *** minutes. Please review the server's error log.

Error 3002

*** network errors occurred in the last *** minutes. Please review the server's error log. The server and/or network hardware may need service.

Error 3003

There were *** bad password attempts in the last *** minutes. Please review the server's audit trail.

Error 3004

There were *** access-denied errors in the last *** minutes. Please review the server's audit trail.

Error 3006

The error log is full. No errors will be logged until the file is cleared or the limit is raised.

Error 3007

The error log is 80 full.

Error 3008

The audit log is full. No audit entries will be logged until the file is cleared or the limit is raised.

Error 3009

The audit log is 80 full.

Error 3010

An error occurred closing file ***. Please check the file to make sure it is not corrupted.

Error 3011

The administrator has closed ***.

Error 3012

There were *** access-denied errors in the last *** minutes.

Error 3020

A power failure was detected at ***. The server has been paused.

Error 3021

Power has been restored at ***. The server is no longer paused.

Error 3022

The UPS service is starting shut down at *** due to low battery.

Error 3023

There is a problem with a configuration of user specified shut down command file. The UPS service started anyway.

Error 3025

A defective sector on drive *** has been replaced (hotfixed). No data was lost. You should run CHKDSK soon to restore full performance and replenish the volume's spare sector pool. The hotfix occurred while processing a remote request.

Error 3026

A disk error occurred on the HPFS volume in drive ***. The error occurred while processing a remote request.

Error 3027

The user accounts database (NET.ACC) is corrupted. The local security system is replacing the corrupted NET.ACC with the backup made on *** at ***. Any updates made to the database after this time are lost.

Error 3028

The user accounts database (NET.ACC) is missing. The local security system is restoring the backup database made on *** at ***. Any updates made to the database after this time are lost.

Error 3029

Local security could not be started because the user accounts database (NET.ACC) was missing or corrupted, and no usable backup database was present. THE SYSTEM IS NOT SECURE.

Error 3030

The server cannot export directory ***, to client ***. It is exported from another server.

Error 3031

The replication server could not update directory *** from the source on *** due to error ***. Error 3032: Master *** did not send an update notice for directory *** at the expected time.

Error 3033

User *** has exceeded account limitation *** on server ***.

Error 3034

The primary domain controller for domain *** failed.

Error 3035

Failed to authenticate with ***, a Windows NT Domain Controller for domain ***.

Error 3036

The replicator attempted to log on at *** as *** and failed.

Error 3037

@I *LOGON HOURS

Error 3038

Replicator could not access *** on *** due to system error ***.

Error 3039

Replicator limit for files in a directory has been exceeded.

Error 3040

Replicator limit for tree depth has been exceeded.

Error 3041

The replicator cannot update directory ***. It has tree integrity and is the current directory for some process.

Error 3042

Network error *** occurred.

Error 3045

System error *** occurred.

Error 3046

Cannot log on. User is currently logged on and argument TRYUSER is set to NO.

Error 3047

IMPORT path *** cannot be found.

Error 3048

EXPORT path *** cannot be found.

Error 3049

Replicated data has changed in directory ***.

Error 3050

Replicator failed to update signal file in directory *** due to *** system error.

Error 3051

The Registry or the information you just typed includes an illegal value for "***".
Explanation: You specified invalid values for one or more of the service'soptions.

Action: Retype the command with correct values, or change the values forthe listed options in the configuration file.

Error 3052

The required parameter was not provided on the command line or in the configuration file.
Explanation: This message should occur only on a down level computer. Anyaction to correct the problem should be performed on that computer. Youmust specify a value for the listed option.

Action: Define a value for the option, either from the command line or inthe configuration file.

Error 3053

LAN Manager does not recognize "***" as a valid option.
Explanation: This message should occur only on a down level computer. Anyaction to correct the problem should be performed on that computer. Thisoption is not valid for this service.

Action: Check the spelling of this option. If you did not type it from thecommand line, check the configuration file.

Error 3054

A request for resource could not be satisfied.
Explanation: The service required more of the listed resource than wasavailable.

Action: Increase the amount of this resource. Stopping other services orapplications may free some resources, such as memory. Also check the diskwhere your pagefile(s) are located. If this disk is full, deleteunnecessary files and directories from it to clear space.

Error 3055

A problem exists with the system configuration.
Explanation: This message should occur only on a down level computer. Anyaction to correct the problem should be performed on that computer. Thesystem is not configured correctly.

Action: Contact your network administrator.

Error 3056

A system error has occurred.
Explanation: The system error may be an internal LAN Manager or Windows NTerror.

Action: If the error code is Error 52, you need to delete the duplicatedomain name the [othodomains] section of your configuration file. If anerror code beginning with "NET" is displayed, you can use the HELPMSGcommand to see more information about the error as follows. Type:
NET HELPMSG message#
where message# is the actual error number. If no error number wasdisplayed, contact technical support.

Error 3057

An internal consistency error has occurred.
Explanation: A software error occurred.

Action: Contact technical support.

Error 3058

The configuration file or the command line has an ambiguous option.
Explanation: This message should occur only on a down level computer. Anyaction to correct the problem should be performed on that computer. Someoptions can be confused with other options that start with the same letter.

Action: Spell out enough of the option so that it cannot be confused withother and options.

Error 3059

The configuration file or the command line has a duplicate parameter.
Explanation: This message should occur only on a down level computer. Anyaction to correct the problem should be performed on that computer. Anoption was used more than once in your command or in the configurationfile. An option can be used only once in a command and once in theconfiguration file. If an option is typed from the command line, itoverrides the value in the configuration file.

Action: Do not type the same option twice in a command. Be sure not to usedifferent abbreviations that can specify the same option, such as "wrkserv"and "wrkservices." If the error was not caused by a command, check theconfiguration file for duplicate options.

Error 3060

The service did not respond to control and was stopped with the DosKillProc function.
Explanation: The service did not respond to a control signal. The servicemay not be running correctly or a fatal error might have occurred. WindowsNT stopped the service.

Action: Contact technical support.

Error 3061

An error occurred when attempting to run the service program.
Explanation: The service you specified could not start.

Action: In the [services] section of your configuration file, find the nameof the program file for this service. Be sure this file exists and is anexecutable file with a filename extension of .EXE or .COM. If the programfile exists, it may be damaged. If possible, restore the file from a backupversion. Otherwise, contact technical support.

Error 3062

The sub-service failed to start.
Explanation: The specified service could not be started automatically whenanother service was started.

Action: Start the service individually.

Error 3063

There is a conflict in the value or use of these options: ***.
Explanation: This message should occur only on a down level computer. Anyaction to correct the problem should be performed on that computer. Twocommand-line options or configuration file entries have conflicting values.

Action: Check the command you typed or the configuration file forconflicting ons.

Error 3064

There is a problem with the file.

Error 3070

memory

Error 3071

disk space

Error 3072

thread

Error 3073

process

Error 3074

Security Failure.

Error 3075

Bad or missing LAN Manager root directory.

Error 3076

The network software is not installed.

Error 3077

The server is not started.

Error 3078

The server cannot access the user accounts database (NET.ACC).

Error 3079

Incompatible files are installed in the LANMAN tree.

Error 3080

The LANMAN\LOGS directory is invalid.

Error 3081

The domain specified could not be used.

Error 3082

The computer name is being used as a message alias on another computer.

Error 3083

The announcement of the server name failed.

Error 3084

The user accounts database is not configured correctly.

Error 3085

The server is not running with user-level security.

Error 3087

The workstation is not configured properly.

Error 3088

View your error log for details.

Error 3089

Unable to write to this file.

Error 3090

ADDPAK file is corrupted. Delete LANMAN\NETPROG\ADDPAK.SER and reapply all ADDPAKs.

Error 3091

The LM386 server cannot be started because CACHE.EXE is not running.

Error 3092

There is no account for this computer in the security database.

Error 3093

This computer is not a member of the group SERVERS.

Error 3094

The group SERVERS is not present in the local security database.

Error 3095

This Windows NT computer is configured as a member of a workgroup, not as a member of a domain. The Netlogon service does not need to run in this configuration.

Error 3096

The Windows NT domain controller for this domain could not be located.

Error 3097

A primary domain controller is already running in this domain.

Error 3098

The service failed to authenticate with the primary domain controller.

Error 3099

There is a problem with the security database creation date or serial number.
Properties

Article ID: 186543 - Last Review: 11/01/2006 05:57:01 - Revision: 1.2

  • Microsoft Windows NT Server 4.0, Terminal Server Edition
  • kbinfo KB186543
Feedback
microsoft.com/c.gif?DI=4050&did=1&t=">id=1&t=">ng = 1; var Route = "76500"; var Ctrl = ""; document.write(" ')[0].appendChild(m);" onload="var m=document.createElement('meta');m.name='ms.dqp0';m.content='false';document.getElementsByTagName('head')[0].appendChild(m);" src="http://c1.microsoft.com/c.gif?"> y>