You are currently offline, waiting for your internet to reconnect

Terminal Server Commands: QUERY

This article was previously published under Q186592
SUMMARY
QUERY replaces QUSER, QPROCESS, QOBJECT, QAPPSERV, QWINSTA from CitrixWinframe.

The query utilities are used to display current information about thesystem such as the current allocation of resources and system status.The query command can invoke any one of the query utilities. The commandline format is:
query [appservers | object | process | session | user] [/?]/? (help)				
Displays the syntax for the command and information about the command's options.

Syntax

Query Appservers:

Displays the available application servers on the network.
Query appservers [servername] [/domain:domainname] [/address] [/continue][/?]

Parameters

servername
Identifies an application server.
/domain:domainname
Displays application server information for the specified domainname. Defaults to the current domain.
/address
Displays the network and node addresses for each server.
/continue
Pauses after each screen of information until a key is pressed.
/? (help)
Displays the syntax for the command and information about the command's options.

Query Appservers -- Additional Notes

Query Appservers searches the network for all attached application serversand returns the following information:

The servername. The network and node address (if the /address option is used).

The following is an example for query appservers:
   C:\>query appserversAPPLICATION SERVERfast_eddieengineeringaccess_1   *brand_x				
The asterisk (*) indicates the current servername. APPLICATION SERVERidentifies the servername.

Query Appservers -- Examples

To display information about all application servers found on the network,type:
query appservers
To display information about the fasteddie application server, type:
query appservers fasteddie
To display information about all application servers in domain SYSTEM,type:
query appservers /domain:system
To display the network and node address for the NABBY application server,type:
query appservers NABBY /address

Syntax

Query Object:
Displays information about the system's Object Manager Namespace.
query object [Objectname] [/device] [/?]

Parameters

Objectname
Identifies the object type to query.
/device
Displays devices in the \DosDevices namespace in a modified format.
/? (help)
Displays the syntax for the command and information about the command's options.

Query Object -- Examples

To display information about the objects that are in the \Driver namespace,type:
query object \Driver
To display information about the objects that are in the \DosDevicesnamespace in a modified format, type:
query object /device

Syntax

Query Process:
Displays information about processes.
query process [processID] [/server:servername] [/system] [/?]
query process[username] [/server:servername] [/system] [/?]
query process[sessionname] [/server:servername] [/system] [/?]
query process[/ID:sessionID] [/server:servername] [/system] [/?]
query process[programname] [/server:servername] [/system] [/?]
query process[*] [/system] [/server:servername] [/?]

Parameters

processID
Identifies a process.
username
Identifies the name of the user whose processes you want to display.
sessionname
Identifies the name of the session. The name was created by the system administrator when the session was configured.
/ID:sessionID
Identifies the session whose processes you want to display.
programname
Identifies the name of the program whose processes you want to display. The .exe extension is required.
/server:servername
The Terminal Server to be queried. Otherwise, the current Terminal Server is used.
/system
Displays process information for system processes.
/? (help)
Displays the syntax for the command and information about the command's options.

Security Restrictions

Query process is used to query only those processes belonging to thecurrent user, unless the current user has sufficient securityclassification to query processes belonging to other users. Administratorshave full access to all query process functions.

Query Process -- Additional Notes

If no process or session is specified, query process queries all processesbelonging to the current user. If a session is specified, it must identifyan active session. You can use wildcards to identify the process. If asingle wildcard is present (*), all processes in the system are identified.

Query process returns the following information:
  The user that owns the process.  The session that owns the process.  The ID of the session.  The process name.  The process state.  The ID of the process.				
The following is an example for query process:
   C:>query process   USERNAME SESSION ID STATE PID   >edj rdp-tcp#002 0 wait 353 progman.exe   >edj rdp-tcp#002 0 wait 49 cmd.exe   >edj rdp-tcp#002 0 wait 139 query.exe   >edj rdp-tcp#002 0 run 375 qprocess.exe				
The > character identifies the current user. Session identifies the sessionwhere the user is logged on the system. ID specifies the ID of the session.

State indicates the state of the process. PID identifies the processID ofthe program that follows.

Query Process -- Examples

To display information about process 8, type:
query process 8
To display information about all processes for user EDDIEJ, type:
query process EDDIEJ
To display information about all processes in session rdp-tcp#002, type:
query process rdp-tcp#002
To display information about all processes in session 4, type:
query process /id:4
To display information about the process Netclient.exe, type:
query process Netclient.exe
To display information about all processes in the system, type:
query process *
To displays information about all processes on the system, including systemprocesses, type:
query process * /system

Syntax

Query Session:
Displays information about sessions.
Query session [sessionname] [/server:servername] [/mode] [/flow] [/connect][/?]
Query session[username] [/server:servername] [/mode] [/flow] [/connect][/?]
Query session[sessionID] [/server:servername] [/mode] [/flow] [/connect][/?]

Parameters

sessionname
Identifies the name of the session. The name was created by the system administrator when the session was configured.
username
Identifies the user of the session.
sessionID
Specifies the ID of the session.
/server:servername
The Terminal Server to be queried. Otherwise, the current Terminal Server is used.
/mode (session mode)
Displays the current line settings.
/flow (flow control)
Displays the current flow control settings.
/connect (connect settings)
Displays the current connect settings.
/? (help)
Displays the syntax for the command and information about the command's options.

Security Restrictions

A user can always query the session where the user is currently logged on.The user must have Query Information access permission to query othersessions.

Query Session -- Additional Notes

If no session is specified, query session displays all active sessions inthe system. Otherwise, the session must identify an active session.

The following is an example for query session:
   C:>query session   SESSION USERNAME ID STATE TYPE DEVICE   >console administrator 0 active   rdp-tcp#003 eddiej 1 active   rdp-tcp 2 listen   rdp-tcp 3 listen   rdp-tcp 4 idle 5 idle				
The > character identifies the current session. Session specifies thesession name. Username identifies the name of the user connected at thesession, if any. ID identifies the ID of the session connected to thesystem, if any. State provides information on the current state of thesession and can be any of the following:
   Active. The session is connected and active.   Conn. The session is connected. No user is logged on.   ConnQ. The session is in the process of connecting. If this state        continues, it indicates a problem with the connection.   Shadow. The session is shadowing another session.   Listen. The session is ready to accept a client connection.   Disc. The session is disconnected.   Idle. The session is initialized.   Down. The session is down, indicating the session failed to initialize correctly.   Init. The session is initializing.				
Type indicates the session type. Device is the device name assigned to thesession (not present for the console or network-connected sessions). Thecomment following the session information is from the profile.

A session initially configured as disabled does not show up in the querysession list until it is enabled.

Query Session -- Examples

To display information about all active sessions on server ACCTG, type:
query session /server:ACCTG
To display information about session MODEM02, if it is active, type:
query session MODEM02

Syntax

Query User:
Displays information about users who are logged on the system.
query user [username] [/server:servername] [/?]
query user[sessionname] [/server:servername] [/?]
query user[sessionID] [/server:servername] [/?]

Parameters

username
Identifies the user.
sessionname
Identifies the name of the session. The name was created by the system administrator when the session was configured.
sessionID
Specifies the ID of the session.
/server:servername
The Terminal Server to be queried. Otherwise, the current Terminal Server is used.
/? (help)
Displays the syntax for the command and information about the command's options.

Security Restrictions

A user must have Query Information access permission to query other users.

Query User -- Additional Notes

Displays information about users who are logged on the system. Users whoare not logged on the system are not included.

If no user or session is specified, query user displays all users who arelogged on the system. The session must identify an active session.

Query user returns the following information:
   The name of the user   The name of the session   The ID that identifies the session   The state of the session (active or disconnected)   The idle time-the time since a keystroke or mouse movement was received    at the session   The logon time, when the user logged on the system				
The following is an example for query user:
   C:\>query user   USERNAME SESSION ID STATE IDLE TIME LOGON TIME   admin console 0 active 55 10/07/94 17:30   >edj rdp-tcp#004 4 active 10/10/94 09:03				


The > character indicates the current user. Username identifies the user.Session identifies the session where the user is logged on the system. IDidentifies the session. Idle time is a measure of interaction between theuser and the system by indicating the time in minutes since the lastkeystroke or mouse movement. A dot (.) indicates that the time is less thana minute. Logon time is the time when the user logged on the system.

Query User -- Examples

To display information about all users logged on the system, type:
query user
To display information about the user EDJ on server WF06, type:
query user EDJ /server:WF06
To display information about the user at session rdp-tcp#001, type:
query user rdp-tcp#001
Properties

Article ID: 186592 - Last Review: 02/22/2007 23:44:47 - Revision: 2.3

  • Microsoft Windows NT Server 4.0, Terminal Server Edition
  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • kbinfo KB186592
Feedback