Performance Monitor shows Log Stalls/sec are regularly greater than zero in Exchange Server 5.5

This article was previously published under Q188676
This article has been archived. It is offered "as is" and will no longer be updated.
Important This article contains information about how to modify the registry. Make sure to back up the registry before you modify it. Make sure that you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 Description of the Microsoft Windows registry
More information
Microsoft Exchange Server 5.5 frequently sets the Log Record Stalls/sec buffer value too low (less than 80 buffers) for large computers. We recommend that a significantly larger number of buffers, like 256 or 512, beused.

Log stalls can have a significant effect on performance. Each log stallcauses a call Sleep ( 1 ). This continues to be called until the logoperation does not return the stall error.

Note Microsoft Exchange 2000 Server and Microsoft Exchange Server 2003 store the log buffer value in the Active Directory directory service. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
328466 ESE log buffers that are set too low can cause the Microsoft Exchange Information Store service to stop responding
When you monitor the Performance Monitor counter, "Database - Log RecordStalls/sec," you may notice that the value is regularly greater than zeroon large computers that are under heavy load.

The Performance Monitor describes this counter as:"Log Record Stalls/sec is the number of log records that cannot be added tothe log buffers per second because they are full. If this counter is non-zero most of the time, the log buffer size may be a bottleneck."
Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall your operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

For information about how to edit the registry, view the "Changing Keys AndValues" Help topic in Registry Editor (Regedit.exe) or the "Add and DeleteInformation in the Registry" and "Edit Registry Data" Help topics inRegedt32.exe. Note that you should back up the registry before you edit it.If you are running Microsoft Windows NT, you should also update your EmergencyRepair Disk (ERD).

You can reduce Log Record Stalls/sec by increasing the number of logbuffers that are available to Microsoft Exchange. To do this, you must add thefollowing registry parameter:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services \MSExchangeIS\ParametersSystem
  1. Start Registry Editor (Regedt32.exe).
  2. Locate the following key in the registry:
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services    \MSExchangeIS\ParametersSystem						
    Note The previous registry key is one path. It has been wrapped for readability.
  3. On the Edit menu, click Add Value, and then add the following registry value:
    Value Name: Log Buffers
    Data Type: REG_DWORD
    Value: > 80 decimal
  4. Quit Registry Editor.
Each buffer holds one log sector. Each log sector is equal to the sectorsize of your log disk (almost always 512 bytes).

Article ID: 188676 - Last Review: 10/26/2013 15:04:00 - Revision: 6.0

Microsoft Exchange Server 5.5 Standard Edition

  • kbnosurvey kbarchive kbprb KB188676