Stop 0x0000002E Using Qlogic Driver Version 2.29

This article was previously published under Q193548
This article has been archived. It is offered "as is" and will no longer be updated.
SYMPTOMS
When you use a Qlogic SCSI adapter (with the Qlogic driver version 2.29)and you modify the NumberofRequests registry value to a number greater thanthe default of 128, the system generates the following blue screen errormessage:

STOP: 0x0000002E (0xFACEFEED, 0x00000000, 0x00000000, 0x80ADD9C8)
DATA_BUS_ERROR
NOTE: The four parameters inside the parentheses will vary according to theconfiguration of the system.

This value does not normally appear in the registry and must be addedmanually to change the default setting of 128.
RESOLUTION
To resolve this problem, obtain the latest service pack for Windows NT 4.0 or Windows NT Server 4.0, Terminal Server Edition. For additional information, click the following article number to view the article in theMicrosoft Knowledge Base:
152734 How to Obtain the Latest Windows NT 4.0 Service Pack

STATUS
Microsoft has confirmed that this is a problem in Windows NT 4.0 and Windows NT Server 4.0, Terminal Server Edition. This problem was first corrected in Windows NT 4.0 Service Pack 4.0 and Windows NT Server 4.0, Terminal Server Edition Service Pack 4.
4.00 stop 2e
Properties

Article ID: 193548 - Last Review: 10/10/2013 22:23:54 - Revision: 2.1

  • Microsoft Windows NT Server 4.0, Terminal Server Edition
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Server 4.0 Standard Edition
  • kbnosurvey kbarchive kbbug kbfix KB193548
Feedback