XADM: Cannot Install Key Management Server in Site

This article was previously published under Q196161
This article has been archived. It is offered "as is" and will no longer be updated.
When you attempt to install Key Management (KM) Server in a site thatmay already have had KM Server installed in it, the followingerror message may be displayed:
WARNING! There is already a KM Server installed in this Site on server servername.
There can only be one KM Server per site. You must remove the existing KM Server before you can install a new one.
If you click OK, Key Manager does not complete the installation on theserver.
The server named in the error message was either removed from thesite, or KM Server was installed on it and was not properly removed by the Setupprogram.
To work around this problem:

WARNING: If you use the raw mode of the Exchange Server Administrator program (admin /r) incorrectly, serious problems may occur that may require you to reinstall Microsoft Windows NT Server, Microsoft Exchange Server, or both. Microsoft cannot guarantee that problems that result from using raw mode incorrectly can be solved. Use raw mode at your own risk.
  1. Make sure you have a backup copy of a directory in the site.
  2. Start the Exchange Server Administrator program in raw mode. At a command prompt type the following:
    c:\exchsrvr\bin\admin.exe /r
  3. Click to open the Site container of the site that you want to install KM Server to, then click the Configuration container.
  4. Click the CA object, and on the Edit menu, click Delete RAW Object.
  5. Click the Site Encryption Configuration object under theConfiguration object, and open File, Raw Properties (press SHIFT+ENTER).
  6. On the Object Attributes menu, click KM-Server.
  7. In the Edit Value list, click the Distinguished Name for the server that was named in the error message that had KM Server installed on it at one time.

    For example:
  8. Press the DELETE key, and then click Remove so that both the Edit value and Attribute value are blank.
  9. Click OK.
  10. Close the Exchange Server Administrator program in RAW Mode.
  11. Proceed with the KM Server setup.
This article assumes that you do not have a backup of your advancedsecurity data and that you want to install and use the KM Server with newsecurity information.
Removing Installing setup error KMS

Article ID: 196161 - Last Review: 10/11/2013 15:45:50 - Revision: 4.3

  • Microsoft Exchange Server 5.0 Standard Edition
  • Microsoft Exchange Server 5.5 Standard Edition
  • kbnosurvey kbarchive kbprb KB196161