You are currently offline, waiting for your internet to reconnect

MAC Address Changes for Virtual Server During a Failover with Clustering

Support for Windows Server 2003 ended on July 14, 2015

Microsoft ended support for Windows Server 2003 on July 14, 2015. This change has affected your software updates and security options. Learn what this means for you and how to stay protected.

This article was previously published under Q244331
SYMPTOMS
After a failover from one cluster node to another, users in a different subnet may be unable to connect to the virtual server.
CAUSE
Server Clusters in Windows 2003 Enterprise Server or Datacenter Server, Failover Clustering in Windows Server 2008 Enterprise or Datacenter and Failover Clustering in Windows Server 2008 R2 Enterprise or Datacenter performs a gratuitous Address Resolution Protocol (ARP) request when a failover occurs. However, some devices (such as switches) may not forward the gratuitous ARP request to other devices. This causes devices on the other side of the switch or router to have the incorrect MAC address for the virtual server that has failed over. Often, this situation corrects itself after a router or switch sees the failure and updates its ARP cache by performing a broadcast. Most routers and switches are configured not to forward ARP traffic between subnets to prevent ARP storms from occurring.
RESOLUTION
Gratuitous ARP requests must be forwarded across networks so that all devices receive the updated MAC-to-IP address mappings. Contact your hardware manufacturer for information about how to change your switch or router's configuration so that gratuitous ARP requests are passed to all networks.
MORE INFORMATION
In a cluster, each computer (or cluster node) has a network adapter attached to the corporate network, and each cluster node has its own IP address, network name (NetBIOS name), and MAC address. The virtual server has an IP address and network name, but uses the MAC address of the cluster node that is the current owner of the virtual server resources.

169017 Information on Groups and Resources Using Microsoft Cluster Server
When a failover occurs, the cluster server of the node that is receiving IP resources sends a gratuitous ARP request so that all devices (computers, routers, and switches) are updated, and a new MAC address is assigned to an existing IP address. If a switch or router does not pass the updated MAC-to-IP address mappings, other network devices contain the old MAC address for the cluster node that is down.

For additional information, click the article numbers below to view the articles in the Microsoft Knowledge Base:
199773 Behavior of Gratuitous ARP in Windows NT 4.0
168567 Clustering Information on IP Address Failover
MSCS vlan cisco virtualserver TCP/IP TCPIP TCP IP
Properties

Article ID: 244331 - Last Review: 09/11/2011 06:03:00 - Revision: 4.0

  • Windows Server 2008 R2 Enterprise
  • Windows Server 2008 R2 Datacenter
  • Microsoft Hyper-V Server 2008 R2
  • Windows Server 2008 Enterprise
  • Windows Server 2008 Datacenter
  • Microsoft Hyper-V Server 2008
  • Microsoft Windows Server 2003, Enterprise Edition (32-bit x86)
  • Microsoft Windows Server 2003, Datacenter Edition (32-bit x86)
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows NT Server 4.0 Enterprise Edition
  • kbclustering kbproductlink kbenv kbnetwork kbprb KB244331
Feedback