Article ID: 257748 - View products that this article applies to.
This article was previously published under Q257748
NoticeThis article applies to Windows 2000. Support for Windows 2000 ends on July 13, 2010. The Windows 2000 End-of-Support Solution Center
(https://support.microsoft.com/?scid=http%3a%2f%2fsupport.microsoft.com%2fwin2000)is a starting point for planning your migration strategy from Windows 2000. For more information see the Microsoft Support Lifecycle Policy
You can use the netsh command in Windows 2000 to script the process of changing a computer from a static Internet Protocol (IP) address to Dynamic Host Configuration Protocol (DHCP) or vice versa. The netsh command accomplishes this task without the need to restart the computer. This feature is particularly useful for laptops that move from one environment to another, when it is necessary to use statically assigned IP addresses at one location and DHCP assigned IP addresses at another.
To switch the specified adapter from a static address to DHCP, type the following command:
netsh interface ip set address "Local Area Connection" dhcpNOTE: Typing this command changes the interface named "Local Area Connection" to DHCP.
To display all of the adapters in the computer with their current IP addresses to determine the correct adapter name, type the following command:
Netsh interface ip show configTo change to a static address, type the following command:
netsh interface ip set address "Local Area Connection" static ipaddr subnetmask gateway metricNOTE: Replace ipaddr with the static IP address, subnetmask with the subnet mask, gateway with the default gateway and, if necessary, metric with the appropriate metric. The following example changes the interface "Local Area Connection" to a static address of 192.168.0.10 with a subnet mask of 255.255.255.0, and the interface has a default gateway of 192.168.0.1 with a metric of 1:
netsh interface ip set address "Local Area Connection" static 192.168.0.10 255.255.255.0 192.168.0.1 1
Article ID: 257748 - Last Review: March 1, 2007 - Revision: 3.4