"A required CD/DVD drive device driver is missing" or "A media driver your computer needs is missing" error message when you install Windows
When you try to install Windows on a computer by using a Windows installation DVD or ISO file, you receive one of the following error messages.
This issue occurs when you try to install Windows 7, Windows Server 2008 R2, Windows 8, or Windows Server 2012.
Windows 7 or Windows Server 2008 R2
A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step Windows 8 or Windows Server 2012
A media driver your computer needs is missing. This could be a DVD, USB, or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now. Note: If the installation media for Windows in the DVD drive or on a USB drive, you can safely remove it for this step.
This issue occurs for one of the following reasons:
The installation DVD is removed during the setup process. A low-quality DVD was used to create the installation DVD. The speed at which the installation DVD was burned was too fast. The DVD drive cannot read the media. The ISO file is corrupted.
To resolve this issue, use one of the following methods, as appropriate for your situation:
Burn the installation DVD at a slower speed. Use a better quality DVD to create the installation DVD. Update the BIOS firmware for your DVD drive. Use the Windows 7 USB/DVD Download tool to create a bootable USB flash drive, and then use the USB flash drive to install Windows.
To troubleshoot this issue, use one of the following methods, as appropriate for your situation:
Run the DVD on a different computer to determine whether the DVD works correctly. Test your DVD drive by using an official Windows installation DVD. Attach the ISO file to a virtual machine to check whether it is corrupted.
When you troubleshoot this issue, first check whether the ISO file is corrupted. Each ISO file that you download from the MSDN Subscriber Downloads website has a SHA1 value that you can compare with the SHA1 value on the MSDN Subscriber Downloads website. However, the Microsoft Volume Licensing Service Center (VLSC) site currently does not list checksums or SHA1 values.
To compare the SHA1 values for the ISO file that you downloaded, follow these steps:
Install the Microsoft File Checksum Integrity Verifier tool. To download the tool, go to the following Microsoft Download Center website: At a command prompt, type the following command, and then press Enter: Fciv.exe <File name>.iso -sha1 Verify that the SHA1 value matches the SHA1 value that is listed on the MSDN Subscriber Downloads website. For example, the following information is displayed for the ISO file for Windows 7 Enterprise with Service Pack 1 (x64) on the MSDN Subscriber Downloads website: File Name: en_windows_7_enterprise_with_sp1_x64_dvd_u_677651.iso Languages: English SHA1: A491F985DCCFB5863F31B728DDDBEDB2FF4DF8D1 The following information is displayed when you run the command for the ISO file for Windows 7 with Service Pack 1 (x64): Command: fciv.exe en_windows_7_enterprise_with_sp1_x64_dvd_u_677651.iso -sha1 Output: A491F985DCCFB5863F31B728DDDBEDB2FF4DF8D1 en_windows_7_enterprise_with_sp1_x64_dvd_u_677651.iso
The ISO file is not corrupted if the SHA1 value on the MSDN Subscriber Downloads website matches the value that is generated when you run the command.
Article ID: 2755139 - Last Review: 08/14/2015 07:17:00 - Revision: 4.0
Applies to Windows 10 Pro, released in July 2015 Windows 10 Enterprise, released in July 2015 Windows 7 Enterprise Windows 7 Home Premium Windows 7 Professional Windows 7 Home Basic Windows 7 Ultimate Windows Server 2008 R2 Datacenter Windows Server 2008 R2 Enterprise Windows Server 2008 R2 Standard Windows 8 Windows 8 Enterprise Windows Server 2012 Datacenter Windows Server 2012 Essentials Windows Server 2012 Standard Keywords: kbprb kbexpertiseinter kbsurveynew KB2755139