How to implement SSL in IIS
IN THIS TASK
back to the top
RequirementsThe following items describe the recommended hardware, software, network infrastructure, skills and knowledge, and service packs that you will need:
- Windows 2000 Server, Advanced Server, or Professional, with Internet Information Services (IIS) version 5.0 and Microsoft Certificate Server version 2.0 installed and configured.
- Windows Server 2003 Standard Edition, Windows Server 2003 Enterprise Edition, Windows Server 2003 Datacenter Edition, or Windows Server 2003 Web Edition-based computer with Internet Information Services (IIS) 6.0 and Certificate Services installed and configured.
back to the top
Create a certificate requestFirst, the Web server must make a certificate request. To do this, follow these steps:
- Start the Internet Service Manager (ISM), which loads the Internet Information Server snap-in for the Microsoft Management Console (MMC). To do this, click Start, point to Programs, point to Administrative Tools, and then click Internet Service Manager or Internet Information Services (IIS) Manager.
- Double-click the server name so that you see all of the Web sites. In IIS 6.0, expand Web Sites.
- Right-click the Web site on which you want to install the certificate, and then click Properties.
- Click the Directory Security tab, and then click Server Certificate under Secure Communications to start the Web Server Certificate Wizard.
- In IIS 6.0, click Next. If you are running IIS 5.0, go to step 6.
- Select Create a new certificate and click Next.
- Select Prepare the request now, but send it later and click Next.
- Type a name for the certificate. You may want to match the certificate name to the name of the Web site. Now, select a bit length; the higher the bit length, the stronger the certificate encryption. Select Server Gated Cryptography if your users may be coming from countries with encryption restrictions.
- Type your organization name and the organizational unit (for example, MyWeb and Development Dept). Click Next.
- Type either the fully qualified domain name (FQDN) or the server name as the common name. If you are creating a certificate that will be used over the Internet, it is preferable to use a FQDN (for example, www.MyWeb.com). Click Next.
- Enter your location information, and then click Next.
- Type the path and file name to save the certificate information to, and click Next to continue.
Note If you type anything other than the default location and file name, be sure to note the name and location you choose, because you will have to access this file in later steps.
- Verify the information that you have typed, and then click Next tocomplete the process and create the certificate request.
Submit a certificate requestThe certificate request that you just created needs to be submitted to a Certificate Authority (CA). This may be your own server with Certificate Server 2.0 installed on it or an online CA such as VeriSign. Contact the certificate provider of your choice and determine the best level of certificate for your needs. There are different methods of submitting your request. Contact the Certificate Authority of your choice to request and receive your certificate. You can create your own certificate with Certificate Server 2.0, but your clients must implicitly trust you as the Certificate Authority. The steps below assume that you are using Certificate Server 2.0 as the certificate provider.
Note The IIS Certificate Wizard will only recognize the Default Web Server template. When you select an Online Enterprise CA, the Authority will not be listed unless the CA is using the Default Web Server template.
- Open a browser and browse to http://YourWebServerName/CertSrv/.
- In IIS 5.0, select Request a Certificate and click Next. In IIS 6.0, click Request a certificate.
- In IIS 5.0, select Advanced Request and click Next. In IIS 6.0, click advanced certificate request.
- In IIS 5.0, select Submit a Certificate Request using a Base64 and click Next. In IIS 6.0, click Submit a certificate request by using a base-64-encoded CMC or PKCS #10 file, or submit a renewal request by using a base-64-encoded PKCS #7 file.
- In Microsoft Notepad, open the request document that you created in the "Create a certificate request" section. In IIS 6.0, you can also click Browse for a file to insert.
- Copy the contents of the document. The contents should resemble the following:
-----BEGIN NEW CERTIFICATE REQUEST-----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-----END NEW CERTIFICATE REQUEST-------Note If you save the document with the default name and location, it is located at C:\Certreq.txt.
Note Be sure to copy all of the content just as shown.
- Paste the contents of the document into the Web form's Base64 Encoded Certificate Request text box.
- Under Certificate Template, select Web Server or User, and then click Submit.
- If Certificate Server is set to Always Issue the Certificate, you can access the certificate immediately. To do this, follow these steps:
- Click Download CA Certificate (do not click Download CA Certificate path or Download certificate chain).
- When you are prompted, select Save this file to disk and save the certificate to your desktop or another location that you will remember. You may now go directly to the "Install the certificate and set up an SSL Web site" section.
Issue and download a certificateTo issue a certificate in Certificate Server, follow these steps:
- Open the CA MMC snap-in. To do this, click Start, point to Programs, point to Administrative Tools, and then click Certificate Authority.
- In IIS 5.0, expand Certificate Authority and click the Pending Requests folder. Your pending certificate requests appear in the right pane.In IIS 6.0, expand the server name.
- Right-click the pending certificate request that you just submitted, select All Tasks, and then click Issue.
Note After you select Issue, the certificate is no longer displayed in this window and folder. It now resides in the Issued Certificate folder.
- After you have issued (and authorized) the certificate, you can return to the Certificate Servers Web interface to select and download the certificate. To do this, follow these steps:
- Browse to http://YourWebServerName/CertSrv/.
- On the default page, select Check on a pending certificate and click Next.In IIS 6.0, click View the status of a pending certificate request.
- Select your pending certificate, then click Next to go to the download page.
- On the download page, click Download CA Certificate (do not click Download CA Certificate path or Download certificate chain).
- When you are prompted, select Save this file to disk and save the certificate to your desktop or another location that you will remember.
Install the certificate and set up an SSL Web siteTo install the certificate, follow these steps:
- Open the Internet Services Manager and expand the server name so that you can view the Web sites.
- Right-click the Web site for which you created the certificate request and click Properties.
- Click the Directory Security tab. Under Secure Communications, click Server Certificate. This starts the Certificate Installation Wizard. Click Next to continue.
- Select Process the pending request and install the certificate and click Next.
- Type the location of the certificate that you downloaded in the "Issue and download a certificate" section, then click Next.The Wizard displays the Certificate Summary. Verify that the information iscorrect, then click Next to continue.
- Click Finish to complete the process.
Configure and test the certificateTo configure and test the certificate, follow these steps:
- On the Directory Security tab, under Secure Communications, note that there are now three available options. To set the Web site to require secure connections, click Edit. The Secure Communications dialog box appears.
- Select Require Secure Channel (SSL) and click OK.
- Click Apply and then OK to close the property sheet.
- Browse to the site and verify that it works. To do this, follow these steps:
- Access the site through HTTP by typing http://localhost/Postinfo.html in the browser. You receive an error message that resembles the following: HTTP 403.4 - Forbidden: SSL required.
- Try to browse to the same Web page using a secured connection (HTTPS) by typing https://localhost/postinfo.html in the browser. You may receive a security alert that states that the certificate is not from a trusted root CA. Click Yes to continue to the Web page. If the page appears, you have successfully installed your certificate.
- Access the site through HTTP by typing http://localhost/Postinfo.html in the browser. You receive an error message that resembles the following:
- The use of SSL slows performance between HTTP servers and browsers. For more information, click the following article number to view the article in the Microsoft Knowledge Base:150031 Use of SSL creates performance overhead for browsers
- When you use Microsoft Visual InterDev version 6.0 to author Web sites with SSL, there are several issues and limitations to consider. For more information, click the following article number to view the article in the Microsoft Knowledge Base:238662 Using Visual InterDev and Secure Sockets Layer
- This article discusses server certificates only. A server certificate enables users to authenticate your server, check the validity of Web content, and establish a secure connection. If you also intend to authenticate users who browse to your Web site, you may consider using client certificates. A typical client certificate contains several items of information: the identity of the user, the identity of the certification authority, a public key that is used for establishing secure communications, and validation information, such as an expiration date and serial number.
REFERENCESFor more information, click the following article numbers to view the articles in the Microsoft Knowledge Base:
Article ID: 299875 - Last Review: 12/03/2007 21:24:49 - Revision: 3.6
- kbhowto KB299875