You are currently offline, waiting for your internet to reconnect

The Syntax and Options for Using the Ipconfig Diagnostic Utility for Network Connections

Support for Windows XP has ended

Microsoft ended support for Windows XP on April 8, 2014. This change has affected your software updates and security options. Learn what this means for you and how to stay protected.

This article was previously published under Q314850
For a Microsoft Windows 2000 version of this article, see 117662.
This article tells how to run the Ipconfig utility and lists the options that you can use.

Ipconfig.exe is included with Windows XP. This utility provides you with diagnostic information related to TCP/IP network configuration. Ipconfig also accepts various Dynamic Host Configuration Protocol (DHCP) commands, allowing a system to update or release its TCP/IP network configuration.
To run the Ipconfig.exe utility, at a command prompt, type ipconfig, and then add any appropriate options.

ipconfig [/? | /all | /renew adapter | /release adapter | /flushdns | /displaydns | /registerdns | /showclassid adapter | /setclassid adapter classid
The adapter connection name can use wildcard characters (* and ?).

   /?             Displays this help message   /all           Displays full configuration information   /release       Releases the IP address for the specified adapter   /renew         Renews the IP address for the specified adapter   /flushdns      Purges the DNS Resolver cache   /registerdns   Refreshes all DHCP leases and reregisters DNS names   /displaydns    Displays the contents of the DNS Resolver Cache   /showclassid   Displays all the DHCP ClassIds allowed for the specified adapter   /setclassid    Modifies the DHCP ClassId				
The default (with no parameters specified) is to display only the IP address, subnet mask, and default gateway for each adapter that is bound to TCP/IP.

For /all, Ipconfig displays all of the current TCP/IP configuration values, including the IP address, subnet mask, default gateway, and Windows Internet Naming Service (WINS) and DNS configuration.

For /release and /renew, if no adapter name is specified, the IP address leases for all adapters that are bound to TCP/IP are released or renewed.

For /setclassid, if no ClassId is specified, the ClassId is removed.

   ipconfig                   Show information   ipconfig /all              Show detailed information   ipconfig /renew            Renew all adapters   ipconfig /renew EL*        Renew any connection whose name starts EL    ipconfig /release *Con*    Release all matching connections, for example, "Local Area Connection 1" or "Local Area Connection2"                                     				
Note that the /Release and /Renew options can be used only if the system is configured with DHCP.

Article ID: 314850 - Last Review: 08/06/2002 09:00:00 - Revision: 1.2

  • Microsoft Windows XP Home Edition
  • Microsoft Windows XP Professional
  • kbinfo kbnetwork KB314850