Cikk azonosítója: 318431 - A cikkben érintett termékek listájának megtekintése.
This article was previously published under Q318431
In Microsoft Exchange server, you may experience the following symptoms:
This behavior may occur if the Spanning-tree Portfast feature is not turned on, on the network switch device that you use.
The "0x80040a01" error that is noted in the "Description" section of Event ID 1005 is a "timeout for topology creation" error. When Exchange server services start, the Exchange server services must contact a domain controller to read configuration information from Active Directory. If a domain controller and a global catalog is unavailable, or cannot be contacted, the Exchange server services cannot start. This is because of topology creation (DSAccess) changes in Exchange server.
To resolve this behavior, turn on the Spanning-tree Portfast option on the network switch in use. Spanning-tree Portfast causes a port to enter the spanning-tree forwarding state immediately, bypassing the listening and learning states.
Contact your network switch hardware vendor for more information about how to turn on this configuration setting.
For information about how to contact contact your network switch hardware vendor, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:
65416Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
(https://support.microsoft.com/kb/65416/EN-US/ )Hardware and Software Third-Party Vendor Contact List, A-K
(https://support.microsoft.com/kb/60781/EN-US/ )Hardware and Software Third-Party Vendor Contact List, L-P
(https://support.microsoft.com/kb/60782/EN-US/ )Hardware and Software Third-Party Vendor Contact List, Q-Z
To work around this behavior, try to start the System Attendant service from the Services snap-in after the network-switch port has fully initialized.
For more information about the possible effects of the Portfast setting with Microsoft Windows NT servers, click the following article number to view the article in the Microsoft Knowledge Base:
(https://support.microsoft.com/kb/247922/ )A "Netlogon event ID 5719" event message is logged when you start a Windows NT Server 4.0-based computer
Cikk azonosítója: 318431 - Utolsó ellenőrzés: 2011. szeptember 10. - Verziószám: 8.0