Article ID: 320855 - View products that this article applies to.
This article was previously published under Q320855
This article describes the Internet Connection Firewall (ICF) that is included with Microsoft Windows XP Home Edition, Microsoft Windows XP Professional, Windows XP Home Edition Service Pack 1 (SP1), and Windows XP Professional SP1. This article does not describe the firewall that is included in Windows XP SP2.
If your network uses Internet Connection Sharing to provide Internet access to multiple computers, it is a good idea to turn on Internet Connection Firewall on the shared Internet connection. However, you can turn on Internet Connection Sharing and Internet Connection Firewall separately. It is a good idea to turn on Internet Connection Firewall on the Internet connection on any Microsoft Windows XP-based computer that is connected directly to the Internet.
Internet Connection Firewall can also help protect a single computer that is connected to the Internet. If you have a single computer that is connected to the Internet with a cable modem, a DSL modem, or a dial-up modem, Internet Connection Firewall helps protect your Internet connection. Do not turn on Internet Connection Firewall for virtual private network (VPN) connections because Internet Connection Firewall interferes with file sharing and other VPN functions.
Communications that originate from a source outside the computer that is running Internet Connection Firewall, such as from the Internet, are dropped by the firewall unless you create an entry on the Services tab to permit passage. Instead of sending you notifications about activity, Internet Connection Firewall silently discards unsolicited communications. This stops common hacking attempts such as port scanning. Such notifications might be sent frequently enough to become a distraction. Instead, Internet Connection Firewall can create a security log so that you can view the activity that is tracked by the firewall.
You can configure services so that unsolicited traffic from the Internet is forwarded by the computer that is running Internet Connection Firewall to the private network. For example, if you are hosting an HTTP Web server service, and you turned on the HTTP service on your computer, unsolicited HTTP traffic is forwarded by the computer that is running Internet Connection Firewall to the HTTP Web server. Internet Connection Firewall requires operational information (known as a service definition) to permit the unsolicited Internet traffic to be forwarded to the Web server on your private network.
You do not have to use Internet Connection Firewall if your network already has a firewall or proxy server.
If your network has only one shared Internet connection, it is a good idea to try to protect the network by turning on Internet Connection Firewall. Individual client computers may also have adapters, such as a dial-up or DSL modem that provide individual connections to the Internet and are vulnerable without firewall protection. Internet Connection Firewall can check only the communications that cross the Internet connection where you have turned it on. Because Internet Connection Firewall works on a per-connection basis, you must enable it on all computers that have connections to the Internet to help protect your whole network. If you turned on Internet Connection Firewall on the Internet Connection Sharing host computer's Internet connection, but a client computer with a direct Internet connection is not using Internet Connection Firewall for protection, your network is vulnerable through that unprotected connection.
The service definitions that permit services to operate across Internet Connection Firewall also work on a per-connection basis. If your network has multiple firewall connections, you must configure service definitions for each Internet Connection Firewall connection through which you want the service to work.
Microsoft Outlook Express, for example, automatically checks for new e-mail messages when a timer tells it to do so. If new e-mail messages are present, Outlook Express prompts you with a new e-mail message notification. Internet Connection Firewall does not affect the behavior of Outlook Express because the request for new e-mail message notification originates from inside the firewall. Internet Connection Firewall makes an entry in a table that notes the outbound communication. When a new e-mail response is acknowledged by the mail server, Internet Connection Firewall finds an associated entry in the table and permits the communication to pass. You then receive notification that a new e-mail message has arrived.
Microsoft Outlook 2000 is connected to a Microsoft Exchange-based server that uses a remote procedure call (RPC) to send new e-mail message notifications to clients. Outlook 2000 does not automatically look for new e-mail messages when it is connected to an Exchange-based server. The Exchange-based server notifies Outlook 2000 when new e-mail messages arrive. Because the RPC notification is initiated from an Exchange-based server that is outside the firewall (not by Outlook 2000), Internet Connection Firewall cannot find a corresponding entry in the table. Internet Connection Firewall does not permit the RPC messages to cross from the Internet to the home network. The RPC notification message is dropped. You can send and receive e-mail messages, but you must manually look for new e-mail.
You can modify the behavior of Internet Connection Firewall by turning on various ICMP options, such as Allow incoming echo request, Allow incoming timestamp request, Allow incoming router request, and Allow redirect. Brief descriptions of these options appear on the ICMP tab.
You can set the permitted size of the security log to prevent an overflow that might be caused by denial-of-service attacks. Event logging is generated in the Extended Log File Format as established by the World Wide Web Consortium (W3C).
For additional information about how to turn Internet Connection Firewall on or off, visit the following Microsoft Web site:
http://technet2.microsoft.com/WindowsServer/en/library/28d7c0c4-539e-4510-9431-9e52d24e0a021033.mspxFor more information about how to turn Internet Connection Firewall on or off, click the following article number to view the article in the Microsoft Knowledge Base:
283673For more information about how Internet Connection Firewall can prevent access to file and printer shares, click the following article number to view the article in the Microsoft Knowledge Base:
(https://support.microsoft.com/kb/283673/ )How to enable or disable Internet Connection Firewall in Windows XP
298804For more information, click the following article number to view the article in the Microsoft Knowledge Base:
(https://support.microsoft.com/kb/298804/ )Internet firewalls can prevent browsing and file sharing
306203For additional information about the Internet Connection Firewall security log file, visit the following Microsoft Web site:
(https://support.microsoft.com/kb/306203/ )Internet Connection Firewall and Basic Firewall do not block Internet Protocol version 6 traffic
http://technet.microsoft.com/en-us/library/cc776029.aspxFor additional information about service definitions, visit the following Microsoft Web site:
http://technet.microsoft.com/en-us/library/cc757410.aspxFor additional information about ICMP, visit the following Microsoft Web sites:
Article ID: 320855 - Last Review: March 7, 2013 - Revision: 7.0