Numer ID artykułu: 321557 - Zobacz jakich produktów dotyczą zawarte w tym artykule porady.
This article was previously published under Q321557
This article has been archived. It is offered "as is" and will no longer be updated.
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
(https://support.microsoft.com/kb/256986/EN-US/ )Description of the Microsoft Windows Registry
The File Replication service (FRS) is a multi-threaded, multi-master replication engine that replaces the LANMan Directory Replication service (LMRepl service) in Microsoft Windows NT versions 3.x and 4.0. Windows 2000-based domain controllers and servers use FRS to replicate system policy and logon scripts for Windows 2000-based and earlier clients.
Optionally, FRS can replicate content between Windows 2000-based servers that host the same fault-tolerant Distributed File System (DFS) roots or child-node replicas.
The changes to Ntfrs.exe that are described in the "Changes to the Post-SP2 Hotfix Versions of Ntfrs.exe and Ntfs.sys" section of this article were originally released as hotfix Q307319 in the Fall of 2001. When a Microsoft Office data-file-deletion problem that is common to all versions of the File Replication service was discovered, Ntfrs.exe was updated again and released again as hotfix Q307319 in March, 2002.
Both versions of the Q307319 hotfix expose a problem in Ntfs.sys that prevents certain rename operations and blocks the replication of some files. Therefore, Ntfrs.exe from the 2002 release of hotfix Q307319 is being repackaged and re-released with the hotfix Q319473 release of Ntfs.sys as hotfix Q321557. Because Ntfs.sys is included, installing this hotfix requires that you restart the computer.
This article describes changes to the versions of Ntfrs.exe and Ntfs.sys that are available in a Windows 2000 post-Service Pack 2 (post-SP2) hotfix that resolves known issues and improves the manageability and robustness of FRS. For a description of these changes, see the "Changes to the Post-SP2 Hotfix Versions of Ntfrs.exe and Ntfs.sys" section in this article.
If this release of Ntfrs.exe is installed on any FRS replica set member, Microsoft recommends that administrators deploy either the Q321557 hotfix version or Windows 2000 Service Pack 3 release of Ntfrs.exe on all members of a common FRS replica set, which means all domain controllers in the same domain or all members of Distributed File System (DFS) root or link targets where FRS replication has been enabled.
When it processes a change order on a downstream partner, Ntfrs renames the matching staging file in a pre-installation folder to its destination file name and folder. Previous versions of Ntfrs may encounter sharing violations during the rename operation if the destination folder is locked by other processes such as Explorer.exe.
To avoid sharing violations, the Q307319 (and the Q321557) version of FRS opens parent folders with reduced access requirements (FILE_READ_ATTRIBUTES instead of GENERIC_READ and GENERIC_EXECUTE). In doing so, the relaxed folder locks avoid sharing violations that prevent the rename operation from completing. However, this exposes an incorrect access check in the Ntfs.sys file system driver. This problem prevents file renames by a service such as Ntfrs that do not have sufficient explicit access to perform the operation on a file or folder, but does have implicit rights as a service. In this case, NTFRS has backup/restore rights, which provides implicit access to all of the folders and files in a volume. The Q321557 hotfix includes an updated Ntfs.sys driver that resolves this problem.
Service Pack InformationTo resolve this problem, obtain the latest service pack for Microsoft Windows 2000. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
(https://support.microsoft.com/kb/260910/EN-US/ )How to Obtain the Latest Windows 2000 Service Pack
Hotfix InformationA supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem.
If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, submit a request to Microsoft Customer Service and Support to obtain the hotfix.
Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=supportNote The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language. The English version of this fix should have the following file attributes or later:
Date Time Version Size File name -------------------------------------------------------- 02-Mar-2002 23:40 5.0.2195.5016 733,456 Ntfrs.exe 03-Mar-2002 02:44 5.0.2195.5016 54,544 Ntfrsapi.dll 03-Mar-2002 02:44 5.0.2195.5016 21,264 Ntfrsprf.dll 02-Mar-2002 23:39 5.0.2195.5016 80,384 Ntfrsres.dll 03-Apr-2002 02:41 5.0.2195.5524 513,072 Ntfs.sys
To avoid replication problems in which System does not have full control of the FRS replica tree, install this Ntfs.sys hotfix on all Windows 2000-based domain controllers and member servers on which the Q307319 release of Ntfrs.exe is installed. After you install this hotfix you must restart the computer.
To work around this problem without installing the hotfix, select a member of the affected Ntfrs replica set (preferably a bridgehead server with many outbound connections). Grant the System account full control of the all of the folders in the FRS replica tree by using these steps:
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. This problem was first corrected in Microsoft Windows 2000 Service Pack 4.
Two versions of Ntfrs.exe that were released as hotfix Q307319 in the Fall of 2001 and in March, 2002, expose an access check problem in Ntfs.sys that prevents the FRS from fully replicating files and folders. Administrators who installed either of these versions of Ntfrs.exe on computers on which the System account does not have full control of the replicated directory tree may experience any of the following symptoms:
Changes to the Post-SP2 Hotfix Versions of Ntfrs.exe and Ntfs.sysThis article describes changes to the versions of Ntfrs.exe and Ntfs.sys that are available in a Windows 2000 post-Service Pack 2 (post-SP2) hotfix that resolves known issues and improves the manageability and robustness of FRS.
FRS Detects and Suppresses Excessive ReplicationWhen data is written to a file, that file is staged for replication. However, there are some cases in which data is written but the file is not changed. For example, if you use Group Policy to apply file permissions, the file is not changed. If you use Group Policy to enforce permissions on files in Sysvol, that policy is applied every five minutes by default. Therefore, FRS tires to replicate the "changed" files even though the permissions were not necessarily modified.
In the post-SP2 hotfix, FRS does not replicate a file if no actual changes were made. Also, if FRS detects a significant increase in the number of changes that are made to a file, FRS logs an event ID 13567 message in the FRS event log.
FRS Performs Serialized Version Vector JoinsWhen a member first joins a replica set, FRS locates the upstream partners and requests a list of all of the files in the replica set. In versions of Windows 2000 before this post-SP2 hotfix, FRS obtains this list of files from all upstream partners at the same time, which results in a duplication of effort on those partners. In the Windows 2000 post-SP2 hotfix, this behavior has been changed so that FRS obtains the list from the upstream partners one after the other. Therefore, if the first upstream partner is synchronized, the new member replicates all of the files from it. The version vector join process with each subsequent partner is much shorter because the new member does not need to replicate any files. If the initial partner is not synchronized, subsequent joins result in updates that are sent to the new member.
FRS Does Not Stop Replicating If the Staging Area Is FilledIf FRS tries to allocate space for a staging file but is not successful either because there is not enough space or because the amount of space in use has reached 90 percent of the staging space-limit parameter (the default value is 660 megabytes), FRS starts to delete staging files. Staged files are deleted (in the order of the longest time since the last access) until the amount of space in use has dropped below 60 percent of the staging space-limit parameter. Therefore, FRS no longer stops replicating if the staging area runs out of free space. If a replica-set member goes offline for a long time, FRS does not block replication on an upstream member because the staging area is filled. For additional information about the staging space limit parameter, click the article number below to view the article in the Microsoft Knowledge Base:
(https://support.microsoft.com/kb/221111/EN-US/ )Description of FRS Entries in the Registry
Increase in the NTFS Journal SizeFRS uses the NTFS file system journal to alert it when changes are made to a file. If the journal wraps, FRS loses track of the changes it needs to replicate. You must perform a non-authoritative restore operation. The NTFS journal size has been increased to 128 megabytes (MB) to reduce the possibility of a journal wrap.
Changes to the Automatic Non-Authoritative Restore FunctionalityFRS no longer performs an automatic non-authoritative restore if a journal wrap condition is detected. Instead, it logs an event ID 13568 message in the FRS event log to remind you to perform the operation at a convenient time. A registry key has been included to configure an automatic non-authoritative restore operation if you want to do so. However, if you configure this setting, the contents of the replica tree may be made unavailable while the restore operation is taking place.
Time-Out ProblemsThe following time-out problems have been addressed:
Changes to the Way in Which You Change the FRS Staging PathYou can now change the FRS staging path without having to perform a non-authoritative restore operation. When FRS detects a change to the staging path, it logs an event ID 13563 message in the FRS event log that describes the procedure. This message is:
The File Replication Service has detected that the staging path for the replica set %1 has changed.
Current staging path = %2The service will start using the new staging path after it restarts. The service is set to restart after every reboot. It is recommended that you manually restart the service to prevent loss of data in the staging directory. To manually restart the service, perform the following steps:
New staging path = %3
 Run "net stop ntfrs" or use the Services snap-in to stop File Replication Service.
 Move all the staging files corresponding to replica set %1 to the new staging location. If more than one replica set are sharing the current staging directory then it is safer to copy the staging files to the new staging directory.
 Run "net start ntfrs" or use the Services snap-in to start File Replication Service.
FRS Renaming of Files in the Pre-Installation Folder Generates "Access Denied"This version of FRS opens parent folders with reduced access requirements (FILE_READ_ATTRIBUTES instead of GENERIC_READ and GENERIC_EXECUTE) to avoid sharing violations that prevent the rename operation on staging files from completing. However, this exposes an incorrect access check in the Ntfs.sys file system driver. An updated Ntfs.sys driver is included in this hotfix package.
221111For additional information about how to obtain a hotfix for Windows 2000 Datacenter Server, click the article number below to view the article in the Microsoft Knowledge Base:
(https://support.microsoft.com/kb/221111/EN-US/ )Description of FRS Entries in the Registry
(https://support.microsoft.com/kb/265173/EN-US/ )The Datacenter Program and Windows 2000 Datacenter Server Product
Numer ID artykułu: 321557 - Ostatnia weryfikacja: 27 lutego 2014 - Weryfikacja: 3.3