This article describes the availability of universal serial
bus (USB) 2.0 driver support in Microsoft Windows XP Service Pack 1.
USB 2.0 support for any Enhanced Host Controller Interface
(EHCI) compliant host controller is available in Windows XP Service Pack 1
(SP1). If you have recently installed Windows XP Service Pack 1 on your
computer, follow the directions in this article to obtain the latest USB 2.0
How to determine whether you do not have to upgrade
You do not have to upgrade the USB 2.0 support if any one of the
following conditions is true:
- You purchase a new USB 2.0-capable system that came with
Windows XP Service Pack 1 pre-installed. Your original equipment manufacturer
(OEM) makes sure that the system has the latest USB 2.0 driver
- You already have Windows XP Service Pack 1 installed on
the computer. You add a new USB 2.0 compatible PCI add-in card. In this
situation, the latest Windows XP Service Pack 1 drivers for USB 2.0 are
auto-selected during driver installation.
- You purchase and install Windows XP with Service Pack 1
included on the CD-ROM.
- You purchase a system from an OEM that slipstreams and
pre-installs Windows XP Service Pack 1. Your OEM makes sure that the appropriate
USB 2.0 drivers are identified and are installed on the system during GUI-mode
How to upgrade to the USB 2.0 Enhanced Host Controller driver in Windows XP Service Pack 1
If your computer supports USB 2.0, and you have a pre-installed
USB 2.0 driver from the OEM, you can continue to use the earlier pre-installed
drivers for USB 2.0. You can do this even after you install Windows XP Service
To upgrade to the USB 2.0 Enhanced Host Controller driver in
Windows XP Service Pack 1, follow these steps:
- Make sure that Windows XP Service Pack 1 is installed. Make
sure that you have restarted your computer if you receive a message to do
For more information about Windows XP Service Pack 1,
visit the following Microsoft Web site:
- Open Device Manager. Locate Devices by
To open Device Manager, either run Devmgmt.msc at a command prompt, or follow these steps:
- Click Start, right-click My
Computer, and then click Manage.
- Expand System Tools, click
Device Manager, and then click Devices by
type on the View menu.
- Right-click USB 2.0 EHCI Host controller,
and then click Update Driver.
You can find the USB
Host controller entry in either of the following locations:
- Universal Serial Bus Controllers.
- Other Devices
Note In the Other Devices location, the USB Host
controller entry is labeled Universal Serial Bus controller
with a yellow exclamation mark.
- Click Install the software automatically
(Recommended), and then click Next.
- Click Finish when installation is
Note You may receive a message to restart your computer to finish the
How to confirm driver versions
Make sure that you have the latest USB 2.0 drivers that are
available in Windows XP Service Pack 1. You can do this by verifying your
driver version in the following table:
Collapse this tableExpand this table
When you install the USB 2.0 drivers from Windows XP Service Pack
1, this overwrites any third-party vendor provided USB 2.0 driver stacks for
your PCI add-in cards. We recommend that you remove these driver stacks before
you install the Windows XP Service Pack 1 USB 2.0 drivers.
USB 2.0 is a specification revision of the original USB 1.1
specification. USB 2.0 was approved April 2000. The corresponding EHCI
specification was finished March 2002.
Windows XP did not include
support for USB 2.0 technology for the following reasons:
- There were no production quality EHCI 1.0 compatible host
- There were not enough production-quality USB 2.0 devices
The Windows XP Service Pack 1 installer is designed to update
all drivers and all files that are included with Windows XP. Because USB 2.0
drivers are not included with Windows XP, you must follow the steps in this
article to obtain the latest drivers after you install Windows XP Service Pack
For more information about the most current articles
that describe USBs, visit the following Microsoft Web site:
Article ID: 329632 - Last Review: May 22, 2013 - Revision: 5.0
|kbhowto kbenv kbinfo kbusb KB329632|