Article ID: 825751 - View products that this article applies to.
There is an updated version of the Extended Change Access Control List tool (Xcacls.exe) that is available as a Microsoft Visual Basic script (Xcacls.vbs) from Microsoft. This step-by-step article describes how to use the Xcacls.vbs script to modify and to view NTFS file system permissions for files or for folders. You can use Xcacls.vbs from the command line to set all the file system security options that are accessible in Microsoft Windows Explorer. Xcacls.vbs displays and modifies the access control lists (ACLs) of files.
Note Xcacls.vbs is only compatible with Microsoft Windows 2000, with Microsoft Windows XP, and with Microsoft Windows Server 2003. Xcacls.vbs is not supported by Microsoft.
Usage: XCACLS filename [/E] [/G user:perm;spec] [...] [/R user [...]] [/F] [/S] [/T] [/P user:perm;spec [...]] [/D user:perm;spec] [...] [/O user] [/I ENABLE/COPY/REMOVE] [/N [/L filename] [/Q] [/DEBUG] filename [Required] If used alone, it displays ACLs. (Filename can be a filename, directory name or wildcard characters and can include the whole path. If path is missing, it is assumed to be under the current directory.) Notes: - Put filename in quotes if it has spaces or special characters such as &, $, #, etc. - If filename is a directory, all files and subdirectories under it will NOT be changed unless the /F or S is present. /F [Used with Directory or Wildcard] This will change all files under the inputted directory but will NOT traverse subdirectories unless /T is also present. If filename is a directory, and /F is not used, no files will be touched. /S [Used with Directory or Wildcard] This will change all subfolders under the inputted directory but will NOT traverse subdirectories unless /T is also present. If filename is a directory, and /S is not used, no subdirectories will be touched. /T [Used only with a Directory] Traverses each subdirectory and makes the same changes. This switch will traverse directories only if the filename is a directory or is using wildcard characters. /E Edit ACL instead of replacing it. /G user:GUI Grant security permissions similar to Windows GUI standard (non-advanced) choices. /G user:Perm;Spec Grant specified user access rights. (/G adds to existing rights for user) User: If User has spaces in it, enclose it in quotes. If User contains #machine#, it will replace #machine# with the actual machine name if it is a non-domain controller, and replace it with the actual domain name if it is a domain controller. New to 3.0: User can be a string representing the actual SID, but MUST be lead by SID# Example: SID#S-1-5-21-2127521184-160... (SID string shown has been shortened) (If any user has SID# then globally all matches must match the SID (not name) so if your intention is to apply changes to all accounts that match Domain\User then do not specify SID# as one of the users.) GUI: Is for standard rights and can be: Permissions... F Full control M Modify X read and eXecute L List folder contents R Read W Write Note: If a ; is present, this will be considered a Perm;Spec parameter pair. Perm: Is for "Files Only" and can be: Permissions... F Full control M Modify X read and eXecute R Read W Write Advanced... D Take Ownership C Change Permissions B Read Permissions A Delete 9 Write Attributes 8 Read Attributes 7 Delete Subfolders and Files 6 Traverse Folder / Execute File 5 Write Extended Attributes 4 Read Extended Attributes 3 Create Folders / Append Data 2 Create Files / Write Data 1 List Folder / Read Data Spec is for "Folder and Subfolders only" and has the same choices as Perm. /R user Revoke specified user's access rights. (Will remove any Allowed or Denied ACL's for user.) /P user:GUI Replace security permissions similar to standard choices. /P user:perm;spec Replace specified user's access rights. For access right specification see /G option. (/P behaves like /G if there are no rights set for user.) /D user:GUI Deny security permissions similar to standard choices. /D user:perm;spec Deny specified user access rights. For access right specification see /G option. (/D adds to existing rights for user.) /O user Change the Ownership to this user or group. /I switch Inheritance flag. If omitted, the default is to not touch Inherited ACL's. Switch can be: ENABLE - This will turn on the Inheritance flag if it is not on already. COPY - This will turn off the Inheritance flag and copy the Inherited ACL's into Effective ACL's. REMOVE - This will turn off the Inheritance flag and will not copy the Inherited ACL's. This is the opposite of ENABLE. If switch is not present, /I will be ignored and Inherited ACL's will remain untouched. /L filename Filename for Logging. This can include a path name if the file is not under the current directory. File will be appended to, or created if it does not exit. Must be Text file if it exists or error will occur. If filename is omitted, the default name of XCACLS will be used. /Q Turn on Quiet mode. By default, it is off. If it is turned on, there will be no display to the screen. /DEBUG Turn on Debug mode. By default, it is off. If it is turned on, there will be more information displayed and/or logged. Information will show Sub/Function Enter and Exit as well as other important information. /SERVER servername Enter a remote server to run script against. /USER username Enter Username to impersonate for Remote Connections (requires PASS switch). Will be ignored if it is for a Local Connection. /PASS password Enter Password to go with USER switch (requires USER switch). Wildcard characters can be used to specify more than one file in a command, such as: * Any string of zero or more characters ? Any single character You can specify more than one user in a command. You can combine access rights.
You can also use Xcacls.vbs to view permissions for files or folders. For example, if you have a folder that is named C:\Test, type the following at a command prompt to view the folder permissions, and then press ENTER:
xcacls.vbs c:\testThe following example is a typical result:
C:\>XCACLS.VBS c:\test Microsoft (R) Windows Script Host Version 5.6 Copyright (C) Microsoft Corporation 1996-2001. All rights reserved. Starting XCACLS.VBS (Version: 3.4) Script at 6/11/2003 10:55:21 AM Startup directory: "C:\test" Arguments Used: Filename = "c:\test" ************************************************************************** Directory: C:\test Permissions: Type Username Permissions Inheritance Allowed BUILTIN\Administrators Full Control This Folder, Subfolde Allowed NT AUTHORITY\SYSTEM Full Control This Folder, Subfolde Allowed Domain1\User1 Full Control This Folder Only Allowed \CREATOR OWNER Special (Unknown) Subfolders and Files Allowed BUILTIN\Users Read and Execute This Folder, Subfolde Allowed BUILTIN\Users Create Folders / Appe This Folder and Subfo Allowed BUILTIN\Users Create Files / Write This Folder and Subfo No Auditing set Owner: Domain1\User1
Note The output of the xcacls.vbs c:\test command in this example matches the text that is shown in the graphical user interface (GUI). Some words are incomplete in the command window.
The output also gives the version of the script, the startup directory, and the arguments that were used.
You can also use wildcard characters to display matching files under the directory. For example, if you type the following, all files with an extension of ".log" that are in the C:\Test folder are displayed:
The following Xcacls.vbs commands provide some examples of Xcacls.vbs usage.
xcacls.vbs c:\test\ /g domain\testuser1:f /f /t /e
This command edits existing permissions. It grants Domain\TestUser1 full control on all files under C:\Test, it traverses subfolders under C:\Test, and then it changes any files that are found. This command does not touch directories.xcacls.vbs c:\test\ /g domain\testuser1:f /s /l "c:\xcacls.log"
This command replaces existing permissions. It grants Domain\TestUser1 full control on all subfolders under C:\Test, and it logs to C:\Xcacls.log. This command does not touch files, and it does not traverse directories.xcacls.vbs c:\test\readme.txt /o "machinea\group1"
This command changes the owner of Readme.txt to be the group MachineA\Group1.xcacls.vbs c:\test\badcode.exe /r "machinea\group1" /r "domain\testuser1"
This command revokes the permissions to C:\Test\Badcode.exe for MachineA\Group1 and for Domain\TestUser1.xcacls.vbs c:\test\subdir1 /i enable /q
This command turns on inheritance on the folder C:\Test\Subdir1. It suppresses any screen output.xcacls.vbs \\servera\sharez\testpage.htm /p "domain\group2":14
This command remotely connects to \\ServerA\ShareZ by using Windows Management Instrumentation (WMI). It then obtains the local path for that share, and under that path, it changes the permissions on Testpage.htm. It leaves the existing permissions of Domain\Group2 intact, but it adds permissions 1 (read data) and 4 (read extended attributes). The command drops other permissions on the file because the /e switch was not used.xcacls.vbs d:\default.htm /g "domain\group2":f /server servera /user servera\admin /pass password /e
This command uses WMI to remotely connect as ServerA\Admin to ServerA and then grants full permissions on Default.htm to Domain\Group2. Existing permissions for Domain\Group2 are lost and other permissions on the file remain.
For additional information about how to use Xcacls.exe, click the following article number to view the article in the Microsoft Knowledge Base:
(https://support.microsoft.com/kb/318754/ )How to use Xcacls.exe to modify NTFS permissions
Article ID: 825751 - Last Review: October 30, 2006 - Revision: 2.4