Article ID: 907284 - View products that this article applies to.
This article describes changes to the readme file for Microsoft SQL Server 2005.
The following information has changed or has become available after the ReadmeSQL2005.htm file for SQL Server 2005 was published.
SQL Server 2005 Setup fails on a computer that is running Windows Server 2003 Service Pack 1 or a later version Windows Server 2003 if the DCOM Server Process Launcher service is not startedYou install SQL Server 2005 on Windows Server 2003 Service Pack 1 (SP1) or a later version of Windows Server 2003. If the DCOM Server Process Launcher service (DCOMLAUNCH) is not started, you receive an error message that resembles the following:
Additionally, the following error message is logged in the log file of the SQL Server 2005 Setup Support Files component (SQLSetupNumber_InstanceName_Support.log)
Error 1601 Installing Microsoft SQL Server 2005 Setup Support Files See Log File for More Detailed Information
MSI (c) (A8:54) [13:10:24:325]: Failed to connect to server. Error: 0x800706BA
SQL Server 2005 Setup fails on a Windows Vista computer that contains lowercase letters or case sensitive collationA new installation of SQL Server 2005 fails if the collation is case sensitive and the computer name contains lowercase letters or special characters. To resolve this issue, rename the computer with only uppercase letters. Upgrade installations of SQL Server 2005 should not be affected by this issue.
SQL Server passwords are now case-sensitiveIn SQL Server 2005, passwords are tied to the operating system. With this change, SQL Server 2005 login passwords are now case-sensitive.
You may receive an error message in the Error and Usage Reporting dialog box on 64-bit computersIf you are running SQL Server 2005 in a 64-bit environment, you may receive an error message if you try to change settings on the Advanced Properties tab of the Error and Usage Reporting dialog box. You receive this error message when the Error Report Location field for Other (x86) components is blank. We recommend that you provide a valid folder name on the local drive in the Error Report Location field. This folder may be the same folder as the folder that you specify for the Other component.
You may receive a blank error message in SQL Server Management StudioYou may upgrade a Microsoft Windows 2000-based computer that is running SQL Server 2005 to Microsoft Windows Server 2003 Service Pack 1 (SP1). When you do this, you may receive a blank error message in SQL Server Management Studio.
To resolve this issue, repair the Microsoft .NET Framework after you upgrade the operating system. To do this, follow these steps:
How to use the DBCS code pageIf the operating system is configured to use the double-byte character set (DBCS) code page, select UNICODE encoding instead of ANSI encoding for the output file in the Generate SQL Server Scripts Wizard.
The Backward Compatibility component is missing in SQL Server Express EditionThe Microsoft SQL Server 2000 Desktop Engine Service Pack 4 (MSDE SP4) is based on Microsoft SQL Server 7.0. When you try to upgrade MSDE SP4 to SQL Server 2005 Express Edition, you receive an error message for the Backward Compatibility component during setup. Additionally, an error message is written to the setup log file. This error message states that the SQLServer2005_BC.msi file does not exist in the Setup folder for SQL Server Express Edition.
To complete SQL Server Express Edition Setup, you must run SQL Server Express Edition Setup in repair mode. For more information, see the "How to: Install SQL Server 2005 from the Command Prompt" topic in SQL Server 2005 Books Online.
For more information about SQL Server 2005 Books Online, visit the following Microsoft Web site:
Garbage characters appear in the SQL Server Component Update dialog box in some localized versions'In the SQL Server 2005 Setup program, garbage characters such as "\\" appear in the text of the SQL Server Component Update dialog box when the following conditions occur in the following order:
Required permissions for full-text search in a clustered environment are changedChanges have been made to the "Section 4.1.6 Lowering privileges for Full-Text Search" topic in the readme file. The restriction that requires special permissions for the Microsoft Full-Text Engine for SQL Server (MSFTESQL) service account in a clustered environment has been removed. In a clustered environment, the MSFTESQL service account no longer requires local Administrator permissions.
Note As a best practice, we recommend that you set the MSFTESQL service to run under a low-privileged account.
How to copy SQL Server 2005 to a network share and then run the Setup program from the copy locationIf you download SQL Server 2005 from the Microsoft Developer Network (MSDN) Web site, the product is split between the following two downloads:
Error: Action "InstallToolsAction.10" threw an exception during execution. Error information reported during run:
Target collection includes the local machine.
Fatal Exception caught while installing package: "10"
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: sqlchaining\sqlprereqpackagemutator.cpp
Function Name: sqls::SqlPreReqPackageMutator::modifyRequest
Source Line Number: 196
WinException caught while installing package. : 1603
Error Code: 0x80070643 (1603)
Windows Error Text: Fatal error during installation.
Source File Name: packageengine\installpackageaction.cpp
Function Name: sqls::InstallPackageAction::perform
Source Line Number: 167
The ForEachDirectory Sample readme file is incompleteThe readme file for the ForEachDirectory Sample is incomplete. To obtain the complete readme file, see the "ForEachDirectory Sample" topic in SQL Server 2005 Books Online.
The SQL Server 2005 Setup program requires 1.6 gigabytes (GB) of disk spaceYou cannot install SQL Server 2005 if you have less than 1.6 GB of available disk space on the system drive. Most of this space is used only for a short time. After you run the Setup program, SQL Server 2005 requires 700 megabytes (MB) of disk space.
Unique nonclustered indexes cannot be created onlineIn the final release version of SQL Server 2005, unique nonclustered indexes cannot be created online. This behavior only affects the following statements:
You may receive an error message if you use a ROLAP queryIf you use a ROLAP query in which the condition is on a parent/child dimension that uses RootMemberIf=ParentIsMissing, you may receive the following error message:
Unable to display cell properties
The Setup program fails when you install SQL Server Analysis Services or Database Engine during an upgradeThe SQL Server 2005 Setup program does not collect shared drive information when you upgrade SQL Server. This behavior may cause the Setup program to fail during an upgrade if any one of the following conditions is true:
For example, use the following syntax to specify the same path for the Database Engine data files as for the Analysis Services data files.
Note You must supply information that is specific to your installation.
You may receive an error message when you use ROLAPYou use ROLAP, and your cube uses tables from multiple data sources. When you try to browse a cube, you may receive one of the following error messages:
Error message 1
Error message 2
OLE DB error: OLE DB or ODBC error: SQL Server blocked access to STATEMENT 'OpenRowset/OpenDatasource' of component 'Ad Hoc Distributed Queries' because this component is turned off as part of the security configuration for this server.
A system administrator can enable the use of 'Ad Hoc Distributed Queries' by using sp_configure. For more information about enabling 'Ad Hoc Distributed Queries', see "Surface Area Configuration" in SQL Server Books Online. ; 42000.
This issue occurs because SQL Server 2005 only gives in-process access to a certain set of providers. SQLNCLI is a new native OLE DB provider for SQL Server 2005 and has access. However, SQLNCLI.1 is the version-specific provider of SQLNCLI and is not on the list of providers. Therefore, SQLNCLI.1 does not have access. Although SQLNCLI and SQLNCLI.1 are identical because SQLNCLI points to SQLNCI.1, SQL Server 2005 does not recognize that SQLNCLI and SQLNCLI.1 are identical. SQL Server 2005 blocks access to SQLNCLI.1.
OLE DB error: OLE DB or ODBC error
To resolve this issue, use one of the following methods:
An assert occurs when you use the EXPORT MINING MODEL commandYou may experience an assert or other failure when you use the EXPORT MINING MODEL command against a local cube. To work around this issue, close and then reopen the connection to the local cube before the EXPORT statement is issued.
You cannot call replication ActiveX controls from applications that were created by using the .NET Framework 1.1 or the .NET Framework 1.0The replication ActiveX controls are deprecated in favor of Replication Management Objects (RMO) for programming in managed code. If you call the ActiveX controls from managed code, you must use the .NET Framework 2.0. If you use an earlier version of the .NET Framework, an exception is thrown.
Do not change sa account name on servers in a replication topologyIn SQL Server 2005, it is possible to change the sa account to a different name using the ALTER LOGIN command. Changing the name is not supported on servers in a replication topology and could result in replication failing.
During upgrade from MSDE to SQL Server Express, the msdb database is not upgradedIf you upgrade MSDE to SQL Server Express, the msdb database is not upgraded. The following replication functionality is affected:
During upgrade from SQL Server 2000 or SQL Server 7.0, the default database of SA changes to MASTERIf you upgrade from SQL Server 2000 or SQL Server 7.0 to the release version of SQL Server 2005, the default database of SA is changed to MASTER. This behavior occurs because the SA account is a special case account and the SA account is cached. To work around this behavior, run the dbcc freesystemcache command or restart the SQL Server service.
Changing the default language for the sa accountThe default language for the SQL Server sa account is the language that is selected during setup or an upgrade. In earlier releases of Microsoft SQL Server, running the sp_configure stored procedure to change the default language of the server also updated the default language for the sa account. To change the default language for the sa account in SQL Server 2005, you must run the sp_defaultlanguage stored procedure, run the DBCC FREESYSTEMCACHE command, and then start a new session. Running sp_configure to change the default language for the server does not update the default language for the sa account.
Side-by-side installationsWarning For SQL Server 2005 installations in side-by-side configurations, the SQL Server 2005 services must use accounts in the global domains group that are used for those services. The account should not appear directly in the local Administrators group. Failure to comply with this warning will cause unexpected security behavior between side-by-side installations and installations where only SQL Server 2005 is installed.
Error message when you attach a database in SQL Server Management Studio on a Windows Vista-based computer: "Unable to open the physical file <file name.mdf>"On a Windows Server 2003-based computer or on a Windows XP-based computer, you detach a database from Microsoft SQL Server 2005. When you try to attach this database in SQL Server Management Studio on a Windows Vista-based computer, you receive the following error message:
This problem occurs even if the current Windows logon account is a member of the SQL Server SysAdmin role.
Unable to open the physical file <file name.mdf>. Operating system error 5: "5 (error not found)"
To resolve this problem, run SQL Server Management Studio by using the Run as administrator option, and then attach the database. After you successfully attach the database for the first time, you can perform later attach operations or detach operations in SQL Server Management Studio without using the Run as administrator option.The SQL
Server 2005 Setup program may stop at the screen "System Configuration Check"You continue to receive the message "SQL Server Setup is scanning your computer's configuration" at the screen System Configuration Check, and do not move to the next screen. This behavior may occur when the Microsoft Distributed Transaction Coordinator service runs under an account other than the NetworkService account in Windows Server 2003 and in Windows XP. Verify that the Microsoft Distributed Transaction Coordinator service runs under the NetworkService account.
For more informationabout the Microsoft Distributed Transaction Coordinator service, click the following article number to view the article in the Microsoft Knowledge Base:
(https://support.microsoft.com/kb/903944/ )The Microsoft Distributed Transaction Coordinator service must run under the NT AUTHORITY\NetworkService Windows account in Windows Server 2003 and in Windows XP
Article ID: 907284 - Last Review: August 11, 2009 - Revision: 12.0