Article ID: 912310 - View products that this article applies to.
This article has been archived. It is offered "as is" and will no longer be updated.
Important This article contains information about how to modify the registry. Make sure to back up the registry before you modify it. Make sure that you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click the following article number to view the article in the Microsoft Knowledge Base:
(https://support.microsoft.com/kb/256986/ )Description of the Microsoft Windows registry
In Microsoft Windows Server 2003, a periodic timer polls the system for corrected hardware error conditions. This process may interfere with the system firmware. This article describes how to disable the corrected machine check to work around this problem.
Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall your operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.
By default, Windows Server 2003 runs a periodic timer. Every 60 seconds, the periodic timer polls the system for corrected hardware error conditions. However, when both the firmware and the operating system operate on the same corrected error information, the firmware and the operating system may conflict.
The corrected machine check process reports these error conditions. Sometimes, you may want to disable this process. To do this, follow these steps:
Article ID: 912310 - Last Review: January 16, 2015 - Revision: 2.2