Xircom Adapter Unable to Connect in Enhanced Mode

This article was previously published under Q93704
This article has been archived. It is offered "as is" and will no longer be updated.
SYMPTOMS
When using the Xircom network adapter with Windows for Workgroups, youmay not be able to access the network while in enhanced mode, but canmake connections at the MS-DOS command prompt.
CAUSE
This problem may be caused by an incorrect entry in the SYSTEM.INIfile for the Xircom 3270 emulation driver.
WORKAROUND
Comment out the following line in the [386Enh] section of theSYSTEM.INI file:
   [386Enh]   Device=P3EFTVD1.386				
by inserting a semicolon at the start of the line, as follows:
   [386Enh]   ;Device=P3EFTVD1.386				
For additional information, contact Xircom technical support.

The Xircom product included here is manufactured by a vendorindependent of Microsoft; we make no warranty, implied or otherwise,regarding this product's performance or reliability.
3.10 3rdparty
Properties

Article ID: 93704 - Last Review: 10/14/2013 18:04:58 - Revision: 1.0

  • Microsoft Windows for Workgroups 3.1
  • kbnosurvey kbarchive KB93704
Feedback