This article applies to Microsoft Dynamics NAV for all countries and all language locales.
Symptoms
Assume that you set a shortcut dimension code field to SALESPERSON on the Dimensions tab in the General Ledger Setup dialog box in Microsoft Dynamics NAV 2009. Then you change the salesperson code in the header in a document that contains several lines. In this situation, the Salesperson Code values are not updated in the document lines. This problem occurs in the following products:
-
Microsoft Dynamics NAV 2009 R2
-
Microsoft Dynamics NAV 2009 Service Pack 1
Resolution
Hotfix information
A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.
Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.
Installation information
Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.
Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.
To implement this hotfix, you must have a developer license.
We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
-
The Modify permission for the object that you will be changing.
-
The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.
Note You do not have to have rights to the data stores unless you have to perform data repair.
Code changes
Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:
-
Change the code in the UpdateAllLineDim function in the Document Dimension table (357) as follows:
Existing code...
WITH DocDimHeader DO
IF FINDSET THEN
REPEAT
IF NOT OldDocDimHeader.GET("Table ID","Document Type","Document No.","Line No.","Dimension Code") OR
// Delete the following line.
(OldDocDimHeader."Dimension Value Code" <> "Dimension Value Code")
THEN BEGIN
DocDimLine.SETRANGE("Dimension Code","Dimension Code");
CASE TableNo OF
DATABASE::"Sales Header":
BEGIN
...Replacement code
...
WITH DocDimHeader DO
IF FINDSET THEN
REPEAT
IF NOT OldDocDimHeader.GET("Table ID","Document Type","Document No.","Line No.","Dimension Code") OR
// Add the following lines.
(OldDocDimHeader."Dimension Value Code" <> "Dimension Value Code") OR
IsOtherDimValueInLines
// End of the lines.
THEN BEGIN
DocDimLine.SETRANGE("Dimension Code","Dimension Code");
CASE TableNo OF
DATABASE::"Sales Header":
BEGIN
... -
Change the code in the UpdateAllServLineDim function in the Document Dimension table (357) as follows:
Existing code...
WITH DocDimHeader DO
IF FIND('-') THEN
REPEAT
IF NOT OldDocDimHeader.GET("Table ID","Document Type","Document No.","Line No.","Dimension Code") OR
// Delete the following line.
(OldDocDimHeader."Dimension Value Code" <> "Dimension Value Code")
THEN BEGIN
DocDimLine.SETRANGE("Dimension Code","Dimension Code");
CASE TableNo OF
DATABASE::"Service Header":
BEGIN
...Replacement code
...
WITH DocDimHeader DO
IF FIND('-') THEN
REPEAT
IF NOT OldDocDimHeader.GET("Table ID","Document Type","Document No.","Line No.","Dimension Code") OR
// Add the following lines.
(OldDocDimHeader."Dimension Value Code" <> "Dimension Value Code") OR
IsOtherDimValueInLines
// End of the lines.
THEN BEGIN
DocDimLine.SETRANGE("Dimension Code","Dimension Code");
CASE TableNo OF
DATABASE::"Service Header":
BEGIN
... -
Change the code in the IsOtherDimValueInLines function in the Document Dimension table (357) as follows:
Existing code...
ERROR(Text005)
END;
END;
END;
BEGIN
END.
}
}
...Replacement code
...
ERROR(Text005)
END;
END;
END;
// Add the following lines.
LOCAL PROCEDURE IsOtherDimValueInLines@13() : Boolean;
BEGIN
CASE "Table ID" OF
DATABASE::"Sales Header":
EXIT(IsOtherDimValueInSalesLines);
DATABASE::"Purchase Header":
EXIT(IsOtherDimValueInPurchLines);
DATABASE::"Service Header":
EXIT(IsOtherDimValueInServiceLines);
END;
END;
LOCAL PROCEDURE IsOtherDimValueInSalesLines@14() : Boolean;
VAR
SalesLine@1001 : Record 37;
DocDim@1002 : Record 357;
BEGIN
SalesLine.SETRANGE("Document Type","Document Type");
SalesLine.SETRANGE("Document No.","Document No.");
IF SalesLine.FINDSET THEN
REPEAT
IF NOT DocDim.GET(DATABASE::"Sales Line","Document Type","Document No.",SalesLine."Line No.","Dimension Code") OR
(DocDim."Dimension Value Code" <> "Dimension Value Code")
THEN
EXIT(TRUE);
UNTIL SalesLine.NEXT = 0;
EXIT(FALSE);
END;
LOCAL PROCEDURE IsOtherDimValueInPurchLines@15() : Boolean;
VAR
PurchaseLine@1001 : Record 39;
DocDim@1002 : Record 357;
BEGIN
PurchaseLine.SETRANGE("Document Type","Document Type");
PurchaseLine.SETRANGE("Document No.","Document No.");
IF PurchaseLine.FINDSET THEN
REPEAT
IF NOT DocDim.GET(DATABASE::"Purchase Line","Document Type","Document No.",PurchaseLine."Line No.","Dimension Code") OR
(DocDim."Dimension Value Code" <> "Dimension Value Code")
THEN
EXIT(TRUE);
UNTIL PurchaseLine.NEXT = 0;
EXIT(FALSE);
END;
LOCAL PROCEDURE IsOtherDimValueInServiceLines@16() : Boolean;
VAR
DocDim@1001 : Record 357;
ServLine@1002 : Record 5902;
BEGIN
ServLine.SETRANGE("Document Type","Document Type");
ServLine.SETRANGE("Document No.","Document No.");
IF ServLine.FINDSET THEN
REPEAT
IF NOT DocDim.GET(DATABASE::"Service Line","Document Type","Document No.",ServLine."Line No.","Dimension Code") OR
(DocDim."Dimension Value Code" <> "Dimension Value Code")
THEN
EXIT(TRUE);
UNTIL ServLine.NEXT = 0;
EXIT(FALSE);
END;
// End of the lines.
BEGIN
END.
}
}
...
Prerequisites
You must have one of the following products installed to apply this hotfix:
-
Microsoft Dynamics NAV 2009 R2
-
Microsoft Dynamics NAV 2009 Service Pack 1
Removal information
You cannot remove this hotfix.
Status
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.
