IBM PC, XT, AT y códigos de error de PS/2

IMPORTANTE: Este artículo ha sido traducido por un software de traducción automática de Microsoft (http://support.microsoft.com/gp/mtdetails) en lugar de un traductor humano. Microsoft le ofrece artículos traducidos por un traductor humano y artículos traducidos automáticamente para que tenga acceso en su propio idioma a todos los artículos de nuestra base de conocimientos (Knowledge Base). Sin embargo, los artículos traducidos automáticamente pueden contener errores en el vocabulario, la sintaxis o la gramática, como los que un extranjero podría cometer al hablar el idioma. Microsoft no se hace responsable de cualquier imprecisión, error o daño ocasionado por una mala traducción del contenido o como consecuencia de su utilización por nuestros clientes. Microsoft suele actualizar el software de traducción frecuentemente.

Haga clic aquí para ver el artículo original (en inglés): 35436
Este artículo se ha archivado. Se ofrece "tal cual" y no se volverá a actualizar.
Resumen
El siguiente es una lista de IBM PC, XT y los AT PS/2 diagnóstico códigos de error. Esta lista se ha compilado de diversos orígenes, incluidos la referencia técnica de IBM manuales, mantenimiento de hardware de IBM y servicio manuales, artículos técnicos y listados de boletín electrónico.
Más información
Code  Description------------------01x   Undetermined problem errors02x   Power supply errors1xx     System Board Errors---------------------------   101  System board error - Interrupt failure   102  System board error - Timer failure   103  System board error - Timer interrupt failure   104  System board error - Protected mode failure   105  System board error - Last 8042 command not accepted   106  System board error - Converting logic test   107  System board error - Hot NMI test   108  System board error - Timer bus test   109  Direct memory access test error   110  System board memory   111  Adapter memory   112  (any adapter in system unit)   113  (any adapter in system unit)   121  Unexpected hardware interrupts occurred   131  Cassette wrap test failed   151  System Board Error; Defective battery   152  System Board Error; Real time clock failure   161  System Options Error - (Run SETUP) Battery failure   162  System options not set correctly-(Run SETUP)   163  Time and date not set - (Run SETUP)   164  Memory size error - (Run SETUP)   165  System options not set - (Run SETUP)   166  (any adapter in system unit)   199  User-indicated configuration not correct 2xx    Memory (RAM) Errors        xxyyyy yyzz 201 bad ram chip in bank xx row zz------------------------------------------------------   201  Memory test failed   202  Memory address error   203  Memory address error   215  (system board memory failure)   216  (system board memory failure) 3xx    Keyboard Errors-----------------------   301  Keyboard did not respond to software reset correctly, or a        stuck key failure was detected. If a stuck key was detected,        the scan code for the key is displayed in hexadecimal. For        example, the error code 49 301 indicates that Key 73, the PAGE        UP key, has failed (49 hex = 73 decimal)   302  User-indicated error from the keyboard test, or AT keylock is        locked   303  Keyboard or system unit error   304  Keyboard or system unit error; CMOS does not match system   305  Models 50 and 60 fuse or keyboard cable error   341  Replace keyboard   342  Replace interface cable   343  Replace enhancement card or cable 4xx    Monochrome Monitor Errors---------------------------------   401  Monochrome memory test, horizontal synchronous frequency test,        or video test failed   408  User-indicated display attributes failure   416  User-indicated character set failure   424  User-indicated 80 X 25 mode failure   432  Parallel port test failed (monochrome adapter) 5xx    Color Monitor Errors----------------------------   501  Color memory test failed, horizontal synchronous frequency        test, or video test failed   508  User-indicated display attribute failure   516  User-indicated character set failure   524  User-indicated 80 X 25 mode failure   532  User-indicated 40 X 25 mode failure   540  User-indicated 320 X 200 graphics mode failure   548  User-indicated 640 X 200 graphics mode failure 6xx    Floppy Disk Drive Errors--------------------------------   601  Disk power-on diagnostics test failed   602  Disk test failed; boot record is not valid   603  Disk size error   606  Disk verify function failed   607  Write-protected disk   608  Bad command disk status returned   610  Disk initialization failed   611  Timeout - disk status returned   612  Bad NEC (controller) - disk status returned   613  Bad DMA - disk status returned   614  DMA Boundary error   621  Bad seek - disk status returned   622  Bad CRC - disk status returned   623  Record not found - disk status returned   624  Bad address mark - disk status returned   625  Bad NEC (controller) seek - disk status returned   626  Disk data compare error   627  Disk change line error   628  Disk removed 7xx    8087 or 80287 Math Coprocessor Errors---------------------------------------------   701  Math coprocessor test failed 9xx    Parallel Printer Adapter Errors---------------------------------------   901  Parallel printer adapter test failed10xx    Reserved for Parallel Printer Adapter---------------------------------------------  1001  Alt printer Adapter test failed11xx   Asynchronous Communications Adapter Errors-------------------------------------------------  1101 Asynchronous communications adapter test failed  1102 Any serial device (system board)  1106 Any serial device (system board)  1107 Communications cable (system board)  1108 Any serial device (system board)  1109 Any serial device (system board)  1110 Modem status register not clear  1111 Ring indicate failure  1112 Trailing edge ring indicate failure  1113 Receive and delta receive line signal detect failure  1114 Receive line signal detect failure  1115 Delta receive line signal detect failure  1116 Line control register; all bits cannot be set  1117 Line control register; all bits cannot be reset  1118 Xmit holding and/or shift register is stuck on  1119 Data ready stuck on  1120 Interrupt enable register, all bits cannot be set  1121 Interrupt enable register, all bits cannot be reset  1122 Interrupt pending stuck on  1123 Interrupt ID register stuck on  1124 Modem control register, all bits cannot be set  1125 Modem control register, all bits cannot be reset  1126 Modem status register, all bits cannot be set  1127 Modem status register, all bits cannot be reset  1128 Interrupt ID failure  1129 Cannot force overrun error  1130 No modem status interrupt  1131 Invalid interrupt pending  1132 No data ready  1133 No data available interrupt  1134 No transmit holding interrupt  1135 No interrupts  1136 No received line status interrupt  1137 No receive data available  1138 Transmit holding register not empty  1139 No modem status interrupt  1140 Transmit holding register not empty  1141 No interrupts  1142 No IRQ4 interrupt  1143 No IRQ3 interrupt  1144 No data transferred  1145 Maximum BAUD rate failed  1146 Minimum BAUD rate failed  1148 Timeout error  1149 Invalid data returned  1150 Modem status register error  1151 No DSR and Delta DSR  1152 No data set ready  1153 No delta  1154 Modem status register not clear  1155 No CTS and Delta CTS  1156 No clear to send  1157 No delta CTS12xx   Alternate Asynchronous Communications Adapter Errors-----------------------------------------------------------  1201 Alternate asynchronous communications adapter test failed  1202 Dual Asynchronous Adapter/A (Any serial device)  1206 Dual Asynchronous Adapter/A (Any serial device)  1207 Dual Asynchronous Adapter/A board error  1208 Dual Asynchronous Adapter/A (Any serial device)  1209 Dual Asynchronous Adapter/A (Any serial device)13xx   Game Control Adapter Errors----------------------------------  1301 Game control adapter test failed  1302 Joystick test failed14xx   Printer Errors---------------------  1401 Printer test failed  1404 Matrix printer failed15xx   Synchronous Data Link Control (SDLC) Communications Adapter Errors-------------------------------------------------------------------------  1510 8255 Port B failure  1511 8255 Port A failure  1512 8255 Port C failure  1513 8253 Timer 1 did not reach terminal count  1514 8253 Timer 1 stuck on  1515 8253 Timer 0 did not reach terminal count  1516 8253 Timer 0 stuck on  1517 8253 Timer 2 did not reach terminal count  1518 8253 Timer 2 stuck on  1519 8273 Port B error  1520 8273 Port A error  1521 8273 command/read timeout  1522 Interrupt level 4 failure  1523 Ring Indicate stuck on  1524 Receive clock stuck on  1525 Transmit clock stuck on  1526 Test indicate stuck on  1527 Ring indicate not on  1528 Receive clock not on  1529 Transmit clock not on  1530 Test indicate not on  1531 Data set ready not on  1532 Carrier detect not on  1533 Clear to send not on  1534 Data set ready stuck on  1536 Clear to send stuck on  1537 Level 3 interrupt failure  1538 Receive interrupt results error  1539 Wrap data miscompare  1540 DMA channel 1 error  1541 DMA channel 1 error  1542 Error in 8273 error checking or status reporting  1547 Stray interrupt level 4  1548 Stray interrupt level 3  1549 Interrupt presentation sequence timeout16xx   Display Emulation Errors (327x, 5520, 525x)--------------------------------------------------17xx   Fixed Disk Errors------------------------The following is a listing of Personal Computer AT Error Codes for thefixed disk drive and fixed disk drive adapter:  1700 Fixed Disk/Adapter  1701 HDD Controller Failure  1702 Time out error  1703 Seek error  1704 Disk adapter error  1705 No record found  1706 Write fault error  1707 Track 0 error  1708 Head select error  1709 Defective ECC  1710 Read buffer overrun  1711 Bad address mark  1712 Error-cause not determined  1713 Data compare error  1714 Drive not ready  1780 Disk 0 failure  1781 Disk 1 failure  1782 Disk adapter error  1790 Disk 0 error  1791 Disk 1 error18xx   I/O Expansion Unit Errors--------------------------------  1801 I/O expansion unit POST error  1810 Enable/Disable failure  1811 Extender card warp test failed (disabled)  1812 High order address lines failure (disabled)  1813 Wait state failure (disabled)  1814 Enable/Disable could not be set on  1815 Wait state failure (disabled)  1816 Extender card warp test failed (enabled)  1817 High order address lines failure (enabled)  1818 Disable not functioning  1819 Wait request switch not set correctly  1820 Receiver card wrap test failure  1821 Receiver high order address lines failure19xx   3270 PC Attachment Card Errors-------------------------------------20xx   Binary Synchronous Communications (BSC) Adapter Errors-------------------------------------------------------------  2010 8255 Port A failure  2011 8255 Port B failure  2012 8255 Port C failure  2013 8253 Timer 1 did not reach terminal count  2014 8253 Timer 1 stuck on  2016 8253 Timer 2 did not reach terminal count, or timer 2 stuck on  2017 8251 Data set ready failed to come on  2018 8251 Clear to send not sensed  2019 8251 Data set ready stuck on  2020 8251 Clear to send stuck on  2021 8251 Hardware reset failed  2022 8251 Software reset failed  2023 8251 Software "error reset" failed  2024 8251 Transmit ready did not come on  2025 8251 Receive ready did not come on  2026 8251 Could not force "overrun" error status  2027 Interrupt failure - no timer interrupt  2028 Interrupt failure - transmit, replace card or planar  2029 Interrupt failure - transmit, replace card  2030 Interrupt failure - receive, replace card or planar  2031 Interrupt failure - receive, replace card  2033 Ring indicate stuck on  2034 Receive clock stuck on  2035 Transmit clock stuck on  2036 Test indicate stuck on  2037 Ring indicate stuck on  2038 Receive clock not on  2039 Transmit clock not on  2040 Test indicate not on  2041 Data set ready not on  2042 Carrier detect not on  2043 Clear to send not on  2044 Data set ready stuck on  2045 Carrier detect stuck on  2046 Clear to send stuck on  2047 Unexpected transmit interrupt  2048 Unexpected receive interrupt  2049 Transmit data did not equal receive data  2050 8251 detected overrun error  2051 Lost data set ready during data wrap  2052 Receive timeout during data wrap21xx   Alternate Binary Synchronous Communications Adapter Errors-----------------------------------------------------------------  2110 8255 Port A failure  2111 8255 Port B failure  2112 8255 Port C failure  2113 8253 Timer 1 did not reach terminal count  2114 8253 Timer 1 stuck on  2115 8253 Timer 2 did not reach terminal count, or timer 2 stuck on  2116 8251 Data set ready failed to come on  2117 8251 Clear to send not sensed  2118 8251 Data set ready stuck on  2119 8251 Clear to send stuck on  2120 8251 Hardware reset failed  2121 8251 Software reset failed  2122 8251 Software "error reset" failed  2123 8251 Transmit ready did not come on  2124 8251 Receive ready did not come on  2125 8251 Could not force "overrun" error status  2126 Interrupt failure - no timer interrupt  2128 Interrupt failure - transmit, replace card or planar  2129 Interrupt failure - transmit, replace card  2130 Interrupt failure - receive, replace card or planar  2131 Interrupt failure - receive, replace card  2133 Ring indicate stuck on  2134 Receive clock stuck on  2135 Transmit clock stuck on  2136 Test indicate stuck on  2137 Ring indicate stuck on  2138 Receive clock not on  2139 Transmit clock not on  2140 Test indicate not on  2141 Data set ready not on  2142 Carrier detect not on  2143 Clear to send not on  2144 Data set ready stuck on  2145 Carrier detect stuck on  2146 Clear to send stuck on  2147 Unexpected transmit interrupt  2148 Unexpected receive interrupt  2149 Transmit data did not equal receive data  2150 8251 detected overrun error  2151 Lost data set ready during data wrap  2152 Receive timeout during data wrap22xx   Cluster Adapter Errors-----------------------------24xx   Enhanced Graphics Adapter Errors---------------------------------------26xx   XT/370 Error Codes-------------------------27xx   XT/370 Error Codes-------------------------29xx   Color Matrix Printer Errors----------------------------------  2901  2902  290430xx   Primary PC Network Adapter Errors----------------------------------------  3001 CPU Failure  3002 ROM Failure  3003 ID Failure  3004 RAM Failure  3005 HIC Failure  3006 +/- 12v Failed  3007 Digital Loopback Failure  3008 Host Detected HIC Failure  3009 Synchronous Fail & No Go Bit  3010 HIC Test OK & No Go Bit  3011 Go Bit & No CMD 41  3012 Card not present  3013 Digital Failure ( Fall Through )  3015 Analog Failure  3041 Hot Carrier (not this card)  3042 Hot Carrier (This Card)31xx   Secondary PC Network Adapter Errors------------------------------------------  3101 CPU Failure  3102 ROM Failure  3103 ID Failure  3104 RAM Failure  3105 HIC Failure  3106 +/- 12v Failed  3107 Digital Loopback Failure  3108 Host Detected HIC Failure  3109 Synchronous Fail & No Go Bit  3110 HIC Test OK & No Go Bit  3111 Go Bit & No CMD 41  3112 Card not present  3113 Digital Failure ( Fall Through )  3115 Analog Failure  3141 Hot Carrier (not this card)  3142 Hot Carrier (THIS CARD !!)33xx   Compact Printer Errors-----------------------------74xx   Display Adapter 8514/A-----------------------------850x   80286 Expanded Memory Adapter/A--------------------------------------851x   80286 Expanded Memory Adapter/A--------------------------------------852x   Memory Module Package on the 80286 Expanded Memory Adapter/A-------------------------------------------------------------------860x   PS/2 Pointing Device Errors----------------------------------   8601   Pointing device (IBM mouse)   8602   Pointing device   8603   System board error   8604   System board : Pointing device100xx  Multiprotocol Adapter/A------------------------------   10002  Multiprotocol Adapter/A any serial device   10006  Multiprotocol Adapter/A any serial device   10007  Communications cable Multiprotocol Adapter/A   10008  Multiprotocol Adapter/A any serial device   10009  Multiprotocol Adapter/A any serial device101xx Modem Adapter/A---------------------   10102  Modem Adapter/A any serial device   10106  Modem Adapter/A any serial device   10108  Modem Adapter/A any serial device   10109  Modem Adapter/A any serial device104xx Fixed Disk Adapter (ESDI) Drives 0 or 1 (C or D)------------------------------------------------------   10480  Fixed disk C, adapter (ESDI) or system board error   10481  Fixed disk D, adapter (ESDI) or system board error   10482  Fixed disk C or system board error   10483  Fixed disk adapter (ESDI) or system board error   10490  Fixed disk C or adapter (ESDI) error   10491  Fixed disk C or adapter (ESDI) error   16500  6157 Tape Attachment Adapter   16520  6157 Streaming Tape Drive   16540  6157 Streaming Tape Drive or tape attachment adapter				
3rdParty win286 win386 3.00 3.00a win30 3.10 3.11 win31 KBHW errmsg err msg wfw wfwg

Advertencia: este artículo se tradujo automáticamente

Propiedades

Id. de artículo: 35436 - Última revisión: 12/04/2015 09:02:56 - Revisión: 2.1

Microsoft Windows 3.0 Standard Edition, Microsoft Windows 3.0a, Microsoft Windows 3.1 Standard Edition, Microsoft Windows 3.11 Standard Edition, Microsoft Windows para Trabajo en Grupo 3.1, Microsoft Windows para Trabajo en Grupo 3.11

  • kbnosurvey kbarchive kbmt KB35436 KbMtes
Comentarios