En este artículo se aplica a Microsoft Dynamics NAV para todos los países y todas las configuraciones regionales.
Síntomas
Cuando se introduce un valor de Código de dirección de envío en un pedido de ventas en Microsoft Dynamics NAV 2013, el Código postal, Ciudad y Provincia de valores no se transfieren desde la ficha envío a dirección de los campos Código envío postal , el campo Población de envío y el campo Envío A-provincia del pedido de venta. Este problema sólo se produce si el valor Envío el código de país o región ya está especificado en la orden de venta y el valor difiere del valor de Código de país o región en la nueva dirección de envío.
Solución
Información de la revisión
Ahora hay una revisión compatible de Microsoft. Sin embargo, sólo se diseñó para corregir el problema que se describe en este artículo. Aplíquela sólo a sistemas que experimenten este problema específico. Esta revisión puede ser sometida a comprobaciones adicionales. Por lo tanto, si no se ve muy afectado por este problema, recomendamos que espere al próximo service pack de Microsoft Dynamics NAV 2013 o la próxima versión de Microsoft Dynamics NAV que contenga esta revisión.
Nota: En casos especiales, los costos derivados normalmente de las llamadas pueden cancelarse si un profesional de soporte técnico de Microsoft Dynamics y productos relacionados de soporte determina que una actualización específica resolverá el problema. Los costos habituales de soporte se aplicarán a las preguntas de soporte técnico adicionales y problemas que no guarden relación con la actualización en cuestión.
Información sobre la instalación
Microsoft proporciona ejemplos de programación únicamente con fines ilustrativos, sin ninguna garantía expresa o implícita. Esto incluye, pero no se limita, a las garantías implícitas de comerciabilidad o idoneidad para un propósito particular. Este artículo asume que está familiarizado con el lenguaje de programación que se muestra y con las herramientas que se utilizan para crear y depurar procedimientos. Los ingenieros de soporte técnico de Microsoft pueden explicarle la funcionalidad de un determinado procedimiento. Sin embargo, no modificarán estos ejemplos para ofrecer mayor funcionalidad ni crearán procedimientos que cumplan sus requisitos específicos.
Nota: Antes de instalar este hotfix, compruebe que todos los usuarios del cliente Microsoft Navision han salido del sistema. Esto incluye a los usuarios del cliente Microsoft Navision Application Services (NAS). Debe ser el único usuario del cliente conectado cuando implemente este hotfix.
Para implementar esta revisión, debe tener una licencia de desarrollador.
Recomendamos que la cuenta de usuario en la ventana Conexiones Windows o en la ventana Conexiones base de datos se asigne el identificador de rol "SUPER". Si la cuenta de usuario no se puede asignar el identificador de rol "SUPER", debe comprobar que la cuenta de usuario tiene los permisos siguientes:
-
El permiso de modificación para el objeto que se va a cambiar.
-
El permiso de ejecución para el objeto System Object ID 5210 y System Object ID 9015 del objeto.
Nota: No es necesario tener derechos para los almacenes de datos a menos que deba realizar reparaciones de datos.
Cambios de código
Nota: Siempre pruebe correcciones de código en un entorno controlado antes de aplicar las revisiones a los equipos de producción.
Para resolver este problema, siga estos pasos:
-
Cambie el código en los campos de la tabla almacén (14) de la siguiente manera:
Código existente... ValidateTableRelation=No;
TestTableRelation=No }
{ 5715; ;County ;Text30 }
{ 5718; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 5719; ;Home Page ;Text90 ;ExtendedDatatype=URL }
// Delete the following lines.
{ 5720; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND ("Country/Region Code" <> '') THEN
Postcode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 5724; ;Use As In-Transit ;Boolean ;OnValidate=BEGIN
IF "Use As In-Transit" THEN BEGIN
TESTFIELD("Require Put-away",FALSE);
TESTFIELD("Require Pick",FALSE);
TESTFIELD("Use Cross-Docking",FALSE);
...Código de sustitución
... ValidateTableRelation=No;
TestTableRelation=No }
{ 5715; ;County ;Text30 }
{ 5718; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 5719; ;Home Page ;Text90 ;ExtendedDatatype=URL }
// Add the following line.
{ 5720; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 5724; ;Use As In-Transit ;Boolean ;OnValidate=BEGIN
IF "Use As In-Transit" THEN BEGIN
TESTFIELD("Require Put-away",FALSE);
TESTFIELD("Require Pick",FALSE);
TESTFIELD("Use Cross-Docking",FALSE);
... -
Cambie el código en los campos de la tabla cliente (18) de la siguiente manera:
Código existente... { 32 ; ;Place of Export ;Code20 }
{ 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Customer;
ValidateTableRelation=No;
TestTableRelation=No }
{ 34 ; ;Customer Disc. Group;Code20 ;TableRelation="Customer Discount Group" }
// Delete the following lines.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 36 ; ;Collection Method ;Code20 }
{ 37 ; ;Amount ;Decimal ;AutoFormatType=1;
AutoFormatExpr="Currency Code" }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Customer),
...Código de sustitución
... { 32 ; ;Place of Export ;Code20 }
{ 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Customer;
ValidateTableRelation=No;
TestTableRelation=No }
{ 34 ; ;Customer Disc. Group;Code20 ;TableRelation="Customer Discount Group" }
// Add the following line.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 36 ; ;Collection Method ;Code20 }
{ 37 ; ;Amount ;Decimal ;AutoFormatType=1;
AutoFormatExpr="Currency Code" }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Customer),
... -
Cambie el código en los campos de la tabla proveedor (23) de la siguiente manera:
Código existente... { 30 ; ;Shipment Method Code;Code10 ;TableRelation="Shipment Method" }
{ 31 ; ;Shipping Agent Code ;Code10 ;TableRelation="Shipping Agent" }
{ 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Vendor;
ValidateTableRelation=No;
TestTableRelation=No }
// Delete the following lines.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Vendor),
No.=FIELD(No.)));
Editable=No }
{ 39 ; ;Blocked ;Option ;OptionString=[ ,Payment,All] }
...Código de sustitución
... { 30 ; ;Shipment Method Code;Code10 ;TableRelation="Shipment Method" }
{ 31 ; ;Shipping Agent Code ;Code10 ;TableRelation="Shipping Agent" }
{ 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Vendor;
ValidateTableRelation=No;
TestTableRelation=No }
// Add the following line.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Vendor),
No.=FIELD(No.)));
Editable=No }
{ 39 ; ;Blocked ;Option ;OptionString=[ ,Payment,All] }
... -
Cambie el código en los campos de la tabla Sales Header (36) de la siguiente manera:
Código existente 1... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Delete the following lines.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
END;
}
// End of the lines.
{ 88 ; ;Sell-to Post Code ;Code20 ;TableRelation="Post Code";
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Código nuevo 1
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Add the following line.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 88 ; ;Sell-to Post Code ;Code20 ;TableRelation="Post Code";
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Código existente 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Sell-to County ;Text30 }
// Delete the following lines.
{ 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Sell-to Country/Region Code" <> xRec."Sell-to Country/Region Code") AND (xRec."Sell-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Sell-to City","Sell-to Post Code","Sell-to County");
END;
}
// End of the lines.
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation="Post Code";
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Código nuevo 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Sell-to County ;Text30 }
// Add the following line.
{ 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation="Post Code";
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Código existente 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Delete the following lines.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
END;
}
// End of the lines.
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point";
OnValidate=BEGIN
UpdateSalesLines(FIELDCAPTION("Exit Point"),FALSE);
END;
...Código nuevo 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Add the following line.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point";
OnValidate=BEGIN
UpdateSalesLines(FIELDCAPTION("Exit Point"),FALSE);
END;
... -
Cambie el código en los campos de la tabla Purchase Header (38) como sigue:
Código existente 1... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Pay-to County ;Text30 }
// Delete the following lines.
{ 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Pay-to Country/Region Code" <> xRec."Pay-to Country/Region Code") AND (xRec."Pay-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Pay-to City","Pay-to Post Code","Pay-to County");
END;
}
// End of the lines.
{ 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código nuevo 1
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Pay-to County ;Text30 }
// Add the following line.
{ 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código existente 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Buy-from County ;Text30 }
// Delete the following lines.
{ 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Buy-from Country/Region Code" <> xRec."Buy-from Country/Region Code") AND (xRec."Buy-from Country/Region Code" <> '') THEN
PostCode.ClearFields("Buy-from City","Buy-from Post Code","Buy-from County");
END;
}
// End of the lines.
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código nuevo 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Buy-from County ;Text30 }
// Add the following line.
{ 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region }
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código existente 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Delete the following lines.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
END;
}
// End of the lines.
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.));
OnValidate=BEGIN
IF "Order Address Code" <> '' THEN BEGIN
OrderAddr.GET("Buy-from Vendor No.","Order Address Code");
...Código nuevo 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Add the following line.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.));
OnValidate=BEGIN
IF "Order Address Code" <> '' THEN BEGIN
OrderAddr.GET("Buy-from Vendor No.","Order Address Code");
... -
Cambie el código en los campos de la tabla de información empresa (79) como sigue:
Código existente... ValidateTableRelation=No;
TestTableRelation=No }
{ 33 ; ;Ship-to County ;Text30 }
{ 34 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 35 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }
// Delete the following lines.
{ 36 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
{ 37 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
END;
}
// End of the lines.
{ 38 ; ;IBAN ;Code50 ;OnValidate=BEGIN
CheckIBAN(IBAN);
END;
}
{ 39 ; ;SWIFT Code ;Code20 }
...Código de sustitución
... ValidateTableRelation=No;
TestTableRelation=No }
{ 33 ; ;Ship-to County ;Text30 }
{ 34 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 35 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }
// Add the following lines.
{ 36 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 37 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
// End of the lines.
{ 38 ; ;IBAN ;Code50 ;OnValidate=BEGIN
CheckIBAN(IBAN);
END;
}
{ 39 ; ;SWIFT Code ;Code20 }
... -
Cambie el código en los campos de la tabla de recursos (156) como sigue:
Código existente... { 55 ; ;Automatic Ext. Texts;Boolean }
{ 56 ; ;No. Series ;Code10 ;TableRelation="No. Series";
Editable=No }
{ 57 ; ;Tax Group Code ;Code10 ;TableRelation="Tax Group" }
{ 58 ; ;VAT Prod. Posting Group;Code10 ;TableRelation="VAT Product Posting Group" }
// Delete the following lines.
{ 59 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 60 ; ;IC Partner Purch. G/L Acc. No.;Code20;
TableRelation="IC G/L Account" }
{ 900 ; ;Qty. on Assembly Order;Decimal ;FieldClass=FlowField;
CalcFormula=Sum("Assembly Line"."Remaining Quantity (Base)" WHERE (Document Type=CONST(Order),
Type=CONST(Resource),
...Código de sustitución
... { 55 ; ;Automatic Ext. Texts;Boolean }
{ 56 ; ;No. Series ;Code10 ;TableRelation="No. Series";
Editable=No }
{ 57 ; ;Tax Group Code ;Code10 ;TableRelation="Tax Group" }
{ 58 ; ;VAT Prod. Posting Group;Code10 ;TableRelation="VAT Product Posting Group" }
// Add the following line.
{ 59 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 60 ; ;IC Partner Purch. G/L Acc. No.;Code20;
TableRelation="IC G/L Account" }
{ 900 ; ;Qty. on Assembly Order;Decimal ;FieldClass=FlowField;
CalcFormula=Sum("Assembly Line"."Remaining Quantity (Base)" WHERE (Document Type=CONST(Order),
Type=CONST(Resource),
... -
Cambie el código en los campos de la tabla de trabajo (167) como sigue:
Código existente... ValidateTableRelation=No;
TestTableRelation=No }
{ 66 ; ;No. Series ;Code10 ;TableRelation="No. Series";
Editable=No }
{ 67 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
// Delete the following lines.
OnValidate=BEGIN
IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
END;
// End of the lines.
Editable=Yes }
{ 68 ; ;Bill-to Name 2 ;Text50 }
{ 117 ; ;Reserve ;Option ;OptionString=Never,Optional,Always }
{ 1000; ;WIP Method ;Code20 ;TableRelation="Job WIP Method".Code WHERE (Valid=CONST(Yes));
OnValidate=VAR
...Código de sustitución
... ValidateTableRelation=No;
TestTableRelation=No }
{ 66 ; ;No. Series ;Code10 ;TableRelation="No. Series";
Editable=No }
{ 67 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
Editable=Yes }
{ 68 ; ;Bill-to Name 2 ;Text50 }
{ 117 ; ;Reserve ;Option ;OptionString=Never,Optional,Always }
{ 1000; ;WIP Method ;Code20 ;TableRelation="Job WIP Method".Code WHERE (Valid=CONST(Yes));
OnValidate=VAR
... -
Cambie el código en los campos de la tabla envío A-dirección (222) como sigue:
Código existente... IF "Shipping Agent Code" <> xRec."Shipping Agent Code" THEN
VALIDATE("Shipping Agent Service Code",'');
END;
}
{ 32 ; ;Place of Export ;Code20 }
// Delete the following lines.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 54 ; ;Last Date Modified ;Date ;Editable=No }
{ 83 ; ;Location Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No)) }
{ 84 ; ;Fax No. ;Text30 }
{ 85 ; ;Telex Answer Back ;Text20 }
{ 91 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
...Código de sustitución
... IF "Shipping Agent Code" <> xRec."Shipping Agent Code" THEN
VALIDATE("Shipping Agent Service Code",'');
END;
}
{ 32 ; ;Place of Export ;Code20 }
// Add the following line.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 54 ; ;Last Date Modified ;Date ;Editable=No }
{ 83 ; ;Location Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No)) }
{ 84 ; ;Fax No. ;Text30 }
{ 85 ; ;Telex Answer Back ;Text20 }
{ 91 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
... -
Cambie el código en la función ClearFields en la tabla de código postal (225) como sigue:
Código existente... CountryCode := PostCodeRec."Country/Region Code";
County := PostCodeRec.County;
END;
END;
// Delete the following lines.
PROCEDURE ClearFields@1(VAR City@1000 : Text[30];VAR PostCode@1001 : Code[20];VAR County@1002 : Text[30]);
BEGIN
City := '';
PostCode := '';
County := '';
END;
// End of the lines.
BEGIN
END.
}
}
...Código de sustitución
... CountryCode := PostCodeRec."Country/Region Code";
County := PostCodeRec.County;
END;
END;
BEGIN
END.
}
}
... -
Cambie el código en los campos de la tabla Banco (270) como sigue:
Código existente... END;
}
{ 24 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 26 ; ;Statistics Group ;Integer }
{ 29 ; ;Our Contact Code ;Code10 ;TableRelation=Salesperson/Purchaser }
// Delete the following lines.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 37 ; ;Amount ;Decimal ;AutoFormatType=1;
AutoFormatExpr="Currency Code" }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Bank Account),
No.=FIELD(No.)));
...Código de sustitución
... END;
}
{ 24 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 26 ; ;Statistics Group ;Integer }
{ 29 ; ;Our Contact Code ;Code10 ;TableRelation=Salesperson/Purchaser }
// Add the following line.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 37 ; ;Amount ;Decimal ;AutoFormatType=1;
AutoFormatExpr="Currency Code" }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Bank Account),
No.=FIELD(No.)));
... -
Cambie el código en los campos de la tabla de cabecera de recordatorio (295) como sigue:
Código existente... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Delete the following line.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 11 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
OnValidate=BEGIN
IF CurrFieldNo = FIELDNO("Currency Code") THEN
IF Undo THEN BEGIN
...Código de sustitución
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Add the following line.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 11 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
OnValidate=BEGIN
IF CurrFieldNo = FIELDNO("Currency Code") THEN
IF Undo THEN BEGIN
... -
Cambie el código en los campos de la tabla Cab (302) como sigue:
Código existente... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Delete the folloiwng lines.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '')THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 11 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
OnValidate=BEGIN
IF CurrFieldNo = FIELDNO("Currency Code") THEN
IF Undo THEN BEGIN
...Código de sustitución
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Add the following line.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 11 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
OnValidate=BEGIN
IF CurrFieldNo = FIELDNO("Currency Code") THEN
IF Undo THEN BEGIN
... -
Cambie el código en los campos de la tabla contacto (5050) como sigue:
Código existente... { 10 ; ;Telex No. ;Text20 }
{ 15 ; ;Territory Code ;Code10 ;TableRelation=Territory }
{ 22 ; ;Currency Code ;Code10 ;TableRelation=Currency }
{ 24 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 29 ; ;Salesperson Code ;Code10 ;TableRelation=Salesperson/Purchaser }
// Delete the following lines.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Rlshp. Mgt. Comment Line" WHERE (Table Name=CONST(Contact),
No.=FIELD(No.),
Sub No.=CONST(0)));
Editable=No }
...Código de sustitución
... { 10 ; ;Telex No. ;Text20 }
{ 15 ; ;Territory Code ;Code10 ;TableRelation=Territory }
{ 22 ; ;Currency Code ;Code10 ;TableRelation=Currency }
{ 24 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 29 ; ;Salesperson Code ;Code10 ;TableRelation=Salesperson/Purchaser }
// Add the following line.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Rlshp. Mgt. Comment Line" WHERE (Table Name=CONST(Contact),
No.=FIELD(No.),
Sub No.=CONST(0)));
Editable=No }
... -
Cambie el código en los campos de la tabla Dirección altern (5051) como sigue:
Código existente... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Delete the following lines.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 12 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 13 ; ;Telex No. ;Text20 }
{ 14 ; ;Extension No. ;Text30 }
{ 15 ; ;Mobile Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 16 ; ;Pager ;Text30 }
...Código de sustitución
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Add the following line.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 12 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 13 ; ;Telex No. ;Text20 }
{ 14 ; ;Extension No. ;Text30 }
{ 15 ; ;Mobile Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 16 ; ;Pager ;Text30 }
... -
Cambie el código en los campos de la tabla Employee (5200) como sigue:
Código existente... { 20 ; ;Birth Date ;Date }
{ 21 ; ;Social Security No. ;Text30 }
{ 22 ; ;Union Code ;Code10 ;TableRelation=Union }
{ 23 ; ;Union Membership No.;Text30 }
{ 24 ; ;Gender ;Option ;OptionString=[ ,Female,Male] }
// Delete the following lines.
{ 25 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 26 ; ;Manager No. ;Code20 ;TableRelation=Employee }
{ 27 ; ;Emplymt. Contract Code;Code10 ;TableRelation="Employment Contract" }
{ 28 ; ;Statistics Group Code;Code10 ;TableRelation="Employee Statistics Group" }
{ 29 ; ;Employment Date ;Date }
{ 31 ; ;Status ;Option ;OnValidate=BEGIN
...Código de sustitución
... { 20 ; ;Birth Date ;Date }
{ 21 ; ;Social Security No. ;Text30 }
{ 22 ; ;Union Code ;Code10 ;TableRelation=Union }
{ 23 ; ;Union Membership No.;Text30 }
{ 24 ; ;Gender ;Option ;OptionString=[ ,Female,Male] }
// Add the following line.
{ 25 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 26 ; ;Manager No. ;Code20 ;TableRelation=Employee }
{ 27 ; ;Emplymt. Contract Code;Code10 ;TableRelation="Employment Contract" }
{ 28 ; ;Statistics Group Code;Code10 ;TableRelation="Employee Statistics Group" }
{ 29 ; ;Employment Date ;Date }
{ 31 ; ;Status ;Option ;OnValidate=BEGIN
... -
Cambie el código en los campos de la tabla dirección alternativa (5201) como sigue:
Código existente... { 13 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Human Resource Comment Line" WHERE (Table Name=CONST(Alternative Address),
No.=FIELD(Employee No.),
Alternative Address Code=FIELD(Code)));
Editable=No }
// Delete the following lines.
{ 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
}
KEYS
{
{ ;Employee No.,Code ;Clustered=Yes }
}
...Código de sustitución
... { 13 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Human Resource Comment Line" WHERE (Table Name=CONST(Alternative Address),
No.=FIELD(Employee No.),
Alternative Address Code=FIELD(Code)));
Editable=No }
// Add the following line.
{ 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
}
KEYS
{
{ ;Employee No.,Code ;Clustered=Yes }
}
... -
Cambie el código en los campos de la tabla de unión (5209) como sigue:
Código existente... { 9 ; ;Address 2 ;Text50 }
{ 10 ; ;County ;Text30 }
{ 11 ; ;Fax No. ;Text30 }
{ 12 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 13 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }
// Delete the following lines.
{ 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
}
KEYS
{
{ ;Code ;Clustered=Yes }
}
...Código de sustitución
... { 9 ; ;Address 2 ;Text50 }
{ 10 ; ;County ;Text30 }
{ 11 ; ;Fax No. ;Text30 }
{ 12 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 13 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }
// Add the following line.
{ 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
}
KEYS
{
{ ;Code ;Clustered=Yes }
}
... -
Cambie el código en los campos de la tabla Centro responsabilidad (5714) como sigue:
Código existente... PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
ValidateTableRelation=No;
TestTableRelation=No }
// Delete the folloiwng lines.
{ 7 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 8 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 9 ; ;Fax No. ;Text30 }
{ 10 ; ;Name 2 ;Text50 }
{ 11 ; ;Contact ;Text50 }
{ 12 ; ;Global Dimension 1 Code;Code20 ;TableRelation="Dimension Value".Code WHERE (Global Dimension No.=CONST(1));
...Código de sustitución
... PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
ValidateTableRelation=No;
TestTableRelation=No }
// Add the following line.
{ 7 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 8 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 9 ; ;Fax No. ;Text30 }
{ 10 ; ;Name 2 ;Text50 }
{ 11 ; ;Contact ;Text50 }
{ 12 ; ;Global Dimension 1 Code;Code20 ;TableRelation="Dimension Value".Code WHERE (Global Dimension No.=CONST(1));
... -
Cambie el código en los campos de la tabla de cabecera de transferencia (5740) como sigue:
Código existente 1... ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;Transfer-from County;Text30 }
{ 10 ; ;Trsf.-from Country/Region Code;Code10;
// Delete the following lines.
TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Trsf.-from Country/Region Code" <> xRec."Trsf.-from Country/Region Code") AND
(xRec."Trsf.-from Country/Region Code" <> '')
THEN
PostCode.ClearFields("Transfer-from City","Transfer-from Post Code","Transfer-from County");
END;
}
// End of the lines.
{ 11 ; ;Transfer-to Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No));
OnValidate=VAR
Location@1000 : Record 14;
Confirmed@1001 : Boolean;
BEGIN
...Código nuevo 1
... ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;Transfer-from County;Text30 }
{ 10 ; ;Trsf.-from Country/Region Code;Code10;
// Add the folloiwng line.
TableRelation=Country/Region }
{ 11 ; ;Transfer-to Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No));
OnValidate=VAR
Location@1000 : Record 14;
Confirmed@1001 : Boolean;
BEGIN
...Código existente 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 18 ; ;Transfer-to County ;Text30 }
// Delete the following lines.
{ 19 ; ;Trsf.-to Country/Region Code;Code10;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Trsf.-to Country/Region Code" <> xRec."Trsf.-to Country/Region Code") AND (xRec."Trsf.-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Transfer-to City","Transfer-to Post Code","Transfer-to County");
END;
}
// End of the lines.
{ 20 ; ;Posting Date ;Date }
{ 21 ; ;Shipment Date ;Date ;OnValidate=BEGIN
TestStatusOpen;
TransferRoute.CalcReceiptDate(
"Shipment Date",
...Código nuevo 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 18 ; ;Transfer-to County ;Text30 }
// Add the following line.
{ 19 ; ;Trsf.-to Country/Region Code;Code10;TableRelation=Country/Region }
{ 20 ; ;Posting Date ;Date }
{ 21 ; ;Shipment Date ;Date ;OnValidate=BEGIN
TestStatusOpen;
TransferRoute.CalcReceiptDate(
"Shipment Date",
... -
Cambie el código en los campos de la tabla Cab (5900) como sigue:
Código existente 1... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Delete the following lines.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
END;
}
// End of the lines.
{ 88 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
ELSE IF (Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Código nuevo 1
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Add the following line.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 88 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
ELSE IF (Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Código existente 2
... TestTableRelation=No }
{ 89 ; ;County ;Text30 }
{ 90 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
VALIDATE("Ship-to Country/Region Code");
// Delete the following lines.
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
// End of the lines.
END;
}
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
...Código nuevo 2
... TestTableRelation=No }
{ 89 ; ;County ;Text30 }
{ 90 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
VALIDATE("Ship-to Country/Region Code");
END;
}
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
...Código existente 3
... ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
// Delete the following lines.
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
// End of the lines.
IF "Ship-to Country/Region Code" <> '' THEN
"VAT Country/Region Code" := "Ship-to Country/Region Code"
ELSE
"VAT Country/Region Code" := "Country/Region Code"
END;
...Código nuevo 3
... ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF "Ship-to Country/Region Code" <> '' THEN
"VAT Country/Region Code" := "Ship-to Country/Region Code"
ELSE
"VAT Country/Region Code" := "Country/Region Code"
END;
... -
Cambie el código en los campos de la tabla Cabecera envío devolución (6650) como sigue:
Código existente 1... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Pay-to County ;Text30 }
// Delete the following lines.
{ 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Pay-to Country/Region Code" <> xRec."Pay-to Country/Region Code") AND (xRec."Pay-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Pay-to City","Pay-to Post Code","Pay-to County");
END;
}
// End of the lines.
{ 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código nuevo 1
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Pay-to County ;Text30 }
// Add the following line.
{ 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código existente 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Buy-from County ;Text30 }
// Delete the following lines.
{ 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Buy-from Country/Region Code" <> xRec."Buy-from Country/Region Code") AND (xRec."Buy-from Country/Region Code" <> '') THEN
PostCode.ClearFields("Buy-from City","Buy-from Post Code","Buy-from County");
END;
}
// End of the lines.
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código nuevo 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Buy-from County ;Text30 }
// Add the following line.
{ 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region }
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código existente 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Delete the following lines.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
END;
}
// End of the lines.
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.)) }
{ 97 ; ;Entry Point ;Code10 ;TableRelation="Entry/Exit Point" }
{ 98 ; ;Correction ;Boolean }
{ 99 ; ;Document Date ;Date }
...Código nuevo 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Add the following line.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.)) }
{ 97 ; ;Entry Point ;Code10 ;TableRelation="Entry/Exit Point" }
{ 98 ; ;Correction ;Boolean }
{ 99 ; ;Document Date ;Date }
... -
Cambie el código en los campos de la tabla de cabecera de recibo de devolución (6660) como sigue:
Código existente 1... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Delete the following lines.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
END;
}
// End of the lines.
{ 88 ; ;Sell-to Post Code ;Code20 ;TableRelation=IF (Sell-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Sell-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Sell-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código nuevo 1
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Add the following line.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 88 ; ;Sell-to Post Code ;Code20 ;TableRelation=IF (Sell-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Sell-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Sell-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código existente 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Sell-to County ;Text30 }
// Delete the following lines.
{ 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Sell-to Country/Region Code" <> xRec."Sell-to Country/Region Code") AND (xRec."Sell-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Sell-to City","Sell-to Post Code","Sell-to County");
END;
}
// End of the lines.
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código nuevo 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Sell-to County ;Text30 }
// Add the following line.
{ 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Código existente 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Delete the following lines.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
END;
}
// End of the lines.
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point" }
{ 98 ; ;Correction ;Boolean }
{ 99 ; ;Document Date ;Date }
{ 100 ; ;External Document No.;Code35 }
...Código nuevo 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Add the following line.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point" }
{ 98 ; ;Correction ;Boolean }
{ 99 ; ;Document Date ;Date }
{ 100 ; ;External Document No.;Code35 }
...
Requisitos previos
Debe tener instalado para aplicar esta revisión de Microsoft Dynamics NAV 2013.
Información de eliminación
No se puede quitar este hotfix.
Estado
Microsoft ha confirmado que se trata de un problema de los productos de Microsoft que se enumeran en la sección "Aplicable a".
Nota: Es un artículo "Publicación rápida" creado directamente desde dentro de la organización de soporte técnico de Microsoft. La información contenida en este documento se proporciona como está en respuesta a nuevos problemas. Como consecuencia de la velocidad en la puesta a disposición, los materiales pueden incluir errores tipográficos y podrán revisarse en cualquier momento sin previo aviso. Para obtener información adicional, consulte Condiciones de uso.
