How to use the Common Dialog API in a database in Access 2003 or Access 2007

INTRODUCTION

This article describes how to use the Common Dialog API in Microsoft Office Access 2003 or in Microsoft Office Access 2007 to replace the Common Dialog Box functionality that is included only in the Microsoft Office 2000 Developer Edition or in the Microsoft Office XP Developer Edition.

More Information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Steps to replace the Common Dialog functionality

Microsoft Office Access 2003

  1. In Access, open the sample database that is named Northwind.mdb.

    Note The Northwind.mdb database for Access 2003 is typically located in the C:\Program Files\Microsoft Office\OFFICE11\Samples folder.
  2. Under Objects in the Northwind Database window, click Forms.
  3. In the Database window toolbar, click New.
  4. In the New Form dialog box, click Design View, and then click OK.
  5. Add a text box to Form1, right-click the text box, and then click Properties.
  6. Click the All tab, click Name, type Text1, and then close the Properties dialog box.
  7. Right-click the label control that is associated with the Text1 text box, click
    Properties, and then click the All tab.
  8. Click Caption, type Text1, and then close the Properties dialog box.
  9. Add a command button to Form1, right-click the command button, click Properties, click
    Name, type Command1, click
    Caption, and then type
    Command1.
  10. Click the Event tab, click [Event Procedure] in the On Click list, and then click the ellipsis button to start the Microsoft Visual Basic Editor.
  11. Modify the code in the Command1_Click procedure to the following:
    Private Sub Command1_Click()
    Me!Text1 = LaunchCD(Me)
    End Sub
  12. On the Insert menu, click
    Module, and then insert the following code into Module1:
    Private Declare Function GetOpenFileName Lib "comdlg32.dll" Alias _
    "GetOpenFileNameA" (pOpenfilename As OPENFILENAME) As Long

    Private Type OPENFILENAME
    lStructSize As Long
    hwndOwner As Long
    hInstance As Long
    lpstrFilter As String
    lpstrCustomFilter As String
    nMaxCustFilter As Long
    nFilterIndex As Long
    lpstrFile As String
    nMaxFile As Long
    lpstrFileTitle As String
    nMaxFileTitle As Long
    lpstrInitialDir As String
    lpstrTitle As String
    flags As Long
    nFileOffset As Integer
    nFileExtension As Integer
    lpstrDefExt As String
    lCustData As Long
    lpfnHook As Long
    lpTemplateName As String
    End Type

    Function LaunchCD(strform As Form) As String
    Dim OpenFile As OPENFILENAME
    Dim lReturn As Long
    Dim sFilter As String
    OpenFile.lStructSize = Len(OpenFile)
    OpenFile.hwndOwner = strform.hwnd
    sFilter = "All Files (*.*)" & Chr(0) & "*.*" & Chr(0) & _
    "JPEG Files (*.JPG)" & Chr(0) & "*.JPG" & Chr(0)
    OpenFile.lpstrFilter = sFilter
    OpenFile.nFilterIndex = 1
    OpenFile.lpstrFile = String(257, 0)
    OpenFile.nMaxFile = Len(OpenFile.lpstrFile) - 1
    OpenFile.lpstrFileTitle = OpenFile.lpstrFile
    OpenFile.nMaxFileTitle = OpenFile.nMaxFile
    OpenFile.lpstrInitialDir = "C:\"
    OpenFile.lpstrTitle = "Select a file using the Common Dialog DLL"
    OpenFile.flags = 0
    lReturn = GetOpenFileName(OpenFile)
    If lReturn = 0 Then
    MsgBox "A file was not selected!", vbInformation, _
    "Select a file using the Common Dialog DLL"
    Else
    LaunchCD = Trim(Left(OpenFile.lpstrFile, InStr(1, OpenFile.lpstrFile, vbNullChar) - 1))
    End If
    End Function
  13. On the Debug menu, click Compile Northwind, and then close the Visual Basic Editor.
  14. On the View menu, click Form View.
  15. Click Command1, and then click a file in the window that opens.

    The path of the file appears in the
    Text1 text box.

Microsoft Office Access 2007

  1. In Access 2007, open the sample database that is named Northwind.accdb.
  2. On the Create tab, click Form in the Forms group.
  3. On the Format tab, click the down arrow below View, and then click Design View.
  4. Add a text box to Form1, right-click the text box, and then click Properties.
  5. Click the All tab, click Name, and then type Text1.
  6. Right-click the label control that is associated with the Text1 text box, click
    Properties, and then click the All tab.
  7. Click Caption, and then type Text1.
  8. Add a command button to Form1, right-click the command button, click Properties, click
    Name, type Command1, click
    Caption, and then type
    Command1.
  9. Click the Event tab, click [Event Procedure] in the On Click list, and then click the ellipsis button (...) to start the Microsoft Visual Basic Editor.
  10. Modify the code in the Command1_Click procedure to resemble the following code example.
    Private Sub Command1_Click()
    Me!Text1 = LaunchCD(Me)
    End Sub
  11. On the Insert menu, click
    Module, and then insert code that resembles the following code example into Module1.
    Private Declare Function GetOpenFileName Lib "comdlg32.dll" Alias _
    "GetOpenFileNameA" (pOpenfilename As OPENFILENAME) As Long

    Private Type OPENFILENAME
    lStructSize As Long
    hwndOwner As Long
    hInstance As Long
    lpstrFilter As String
    lpstrCustomFilter As String
    nMaxCustFilter As Long
    nFilterIndex As Long
    lpstrFile As String
    nMaxFile As Long
    lpstrFileTitle As String
    nMaxFileTitle As Long
    lpstrInitialDir As String
    lpstrTitle As String
    flags As Long
    nFileOffset As Integer
    nFileExtension As Integer
    lpstrDefExt As String
    lCustData As Long
    lpfnHook As Long
    lpTemplateName As String
    End Type

    Function LaunchCD(strform As Form) As String
    Dim OpenFile As OPENFILENAME
    Dim lReturn As Long
    Dim sFilter As String
    OpenFile.lStructSize = Len(OpenFile)
    OpenFile.hwndOwner = strform.hwnd
    sFilter = "All Files (*.*)" & Chr(0) & "*.*" & Chr(0) & _
    "JPEG Files (*.JPG)" & Chr(0) & "*.JPG" & Chr(0)
    OpenFile.lpstrFilter = sFilter
    OpenFile.nFilterIndex = 1
    OpenFile.lpstrFile = String(257, 0)
    OpenFile.nMaxFile = Len(OpenFile.lpstrFile) - 1
    OpenFile.lpstrFileTitle = OpenFile.lpstrFile
    OpenFile.nMaxFileTitle = OpenFile.nMaxFile
    OpenFile.lpstrInitialDir = "C:\"
    OpenFile.lpstrTitle = "Select a file using the Common Dialog DLL"
    OpenFile.flags = 0
    lReturn = GetOpenFileName(OpenFile)
    If lReturn = 0 Then
    MsgBox "A file was not selected!", vbInformation, _
    "Select a file using the Common Dialog DLL"
    Else
    LaunchCD = Trim(Left(OpenFile.lpstrFile, InStr(1, OpenFile.lpstrFile, vbNullChar) - 1))
    End If
    End Function
  12. On the Debug menu, click Compile Northwind, and then close the Visual Basic Editor.
  13. On the Format tab, click the down arrow below View, and then click Form View.
  14. Click Command1, and then click a file in the window that opens.

    The path of the file appears in the
    Text1 box.
Propriétés

ID d'article : 888695 - Dernière mise à jour : 17 sept. 2011 - Révision : 1

Commentaires