Fichier Windows 95 Setup.txt

IMPORTANT : Cet article est issu du système de traduction automatique mis au point par Microsoft (http://support.microsoft.com/gp/mtdetails). Un certain nombre d’articles obtenus par traduction automatique sont en effet mis à votre disposition en complément des articles traduits en langue française par des traducteurs professionnels. Cela vous permet d’avoir accès, dans votre propre langue, à l’ensemble des articles de la base de connaissances rédigés originellement en langue anglaise. Les articles traduits automatiquement ne sont pas toujours parfaits et peuvent comporter des erreurs de vocabulaire, de syntaxe ou de grammaire (probablement semblables aux erreurs que feraient une personne étrangère s’exprimant dans votre langue !). Néanmoins, mis à part ces imperfections, ces articles devraient suffire à vous orienter et à vous aider à résoudre votre problème. Microsoft s’efforce aussi continuellement de faire évoluer son système de traduction automatique. Si vous relevez des erreurs graves et souhaitez contribuer à l’amélioration du système, vous pouvez compléter l’enquête à votre disposition dans le bas des articles.

La version anglaise de cet article est la suivante: 305710
Cet article a été archivé. Il est proposé « en l'état » et ne sera plus mis à jour.
Résumé
Cet article contient une copie des informations du fichier Setup.txt inclus avec Windows 95. Ce fichier se trouve dans le dossier Win95 sur le CD-ROM Windows 95.

Pour plus d'information comment sur installer Windows et Questions fréquemment plus posées, reportez-vous au site Web de Microsoft à l'adresse suivante :
Plus d'informations
  -------------------------------------------------------------------                    Microsoft Windows 95 README for Setup                               August 1995              -------------------------------------------------------------------                  (c) Copyright Microsoft Corporation, 1995This document provides complementary or late-breaking information tosupplement the Microsoft Windows 95 documentation.------------------------How to Use This Document------------------------To view Setup.txt on screen in Notepad, maximize the Notepad window.To print Setup.txt, open it in Notepad or another word processor, and then use the Print command on the File menu.--------CONTENTSSETUP.TXTFINDING AND FIXING HARD-DISK PROBLEMS DURING SETUP (USING SCANDISK)UNINSTALLING WINDOWS 95IF YOU HAVE A COMPRESSED DRIVEINSTALLING WINDOWS 95 OVER WINDOWS NT INSTALLING WINDOWS 95 OVER OS/2INSTALLING WINDOWS 95 ON COMPUTERS WITH LANTASTICSETUP ERROR MESSAGESGENERAL SETUP NOTESMEMORY MANAGERSDISK-CACHE PROGRAMSANTI-VIRUS SOFTWAREUSING TERMINATE-AND-STAY-RESIDENT (TSR) PROGRAMS AND DRIVERSKNOWN POTENTIAL SETUP PROBLEMS--------SETUP.TXT=========This file contains information about problems that may occur whileyou are running Windows 95 Setup.NOTE: It is recommended that you check your hard disk for virusesbefore setting up Windows 95. If you have MS-DOS 6.x, you shouldrun MSAV before running Setup.You should also turn off any screen savers you have running, anddisable any anti-virus software that is running before you start Setup.FINDING AND FIXING HARD-DISK PROBLEMS DURING SETUP (USING SCANDISK)===================================================================Windows 95 Setup automatically runs ScanDisk to check for problemson your hard disk(s). If there are problems, Setup cannot continueuntil they are fixed.NOTE: The MS-DOS-based version of ScanDisk that Setup runs may detectlong filename errors, but it cannot correct them. These errors willnot prevent Setup from proceeding, but once it completes, you shouldrun the new Windows version of ScanDisk from within Windows 95 tocorrect these errors.Fixing Hard-Disk Problems-------------------------If you see a message during Setup that says you must run ScanDisk tofix problems on your hard disk, follow these steps to fix the problems.If you are setting up Windows 95 over MS-DOS or a previous version ofWindows, such as Windows 3.1:1. Quit Windows.2. If you are setting up from floppy disks, insert Setup Disk 1 into    the drive, and then type the following at the command prompt:	a:scandisk.exe /all   where "a" is the drive that contains the Windows disk.   If you are setting up from a CD-ROM, insert the CD-ROM and then type   the following:        f:\win95\scandisk.exe /all   where "f" is the drive that contains the CD-ROM.4. Follow the instructions on your screen and fix any problems that   ScanDisk finds.5. Start Windows, and then run Setup again.If you are setting up Windows 95 over a previous version of Windows 95:1. Quit Setup.2. On the Start menu, point to Programs, point to Accessories, point    to System Tools, and then click ScanDisk.3. Check your your hard disk(s) and any host drives you have for errors,   and repair any problems found.NOTE: If you are running Setup from MS-DOS, ScanDisk will run and you'llbe able to fix most problems from within Setup.Problems Running ScanDisk-------------------------If you get a message during Setup saying that there is not enough memoryto run ScanDisk, free some conventional and/or upper memory, and then runSetup again. If you have MS-DOS 6.x, try running MEMMAKER to free memory.If you still don't have enough memory, or if you have other problems whileSetup is running ScanDisk, then you can bypass ScanDisk in Setup by runningSetup with the /IS option. To do this, type the following command:	setup /isNOTE: Bypassing ScanDisk during Setup is not recommended. If you do, there may be problems with your hard disk that could cause Windows 95not to install or run correctly.If you still have problems after running Setup with the /IS option, try running Setup with the /IQ option. To do this, type the following command:        setup /is /iqUNINSTALLING WINDOWS 95=======================During Setup, you'll have the option of saving your system files so thatyou can uninstall Windows 95 later. If you want to be able to uninstall Windows 95 later, choose Yes. Setup will save your system files in a hidden, compressed file. If you don't need to be able to uninstall Windows 95 later, choose No.You will not see this Setup option if:- You are upgrading over an earlier version of Windows 95.- You are installing to a new directory.- You are running a version of MS-DOS earlier than 5.0.NOTE: The uninstall files must be saved on a local hard drive. You cannot save them to a network drive or a floppy disk. If you have multiple local drives, you will be able to select the one you want to save the uninstall information on.NOTE: If you see a message during Setup about not being able to save your system files, see the "Setup Error Messages" section later in this document.To uninstall Windows 95 and completely restore your system to itsprevious versions of MS-DOS and Windows 3.x:1. Click the Start button, point to Settings, and then click Control    Panel.2. Double-click Add/Remove Programs.3. On the Install/Uninstall tab, click Windows 95, and then click    Remove.Or, if you are having problems starting Windows 95, use your startupdisk to start your computer, and then run UNINSTAL from the startupdisk.NOTE: The uninstall program needs to shut down Windows 95. If there is a problem with this on your computer, restart your computer and pressF8 when you see the message "Starting Windows 95." Then chooseCommand Prompt Only and run UNINSTAL from the command prompt.If Setup did not complete successfully and you want to restore yourprevious versions of MS-DOS and Windows, you can run UNINSTAL from the\Windows\Command directory on your hard disk, or from your startup diskif you created one.If you saved your files on a drive other than C, you can use the /w option to specify the drive where the files are located. For example:        uninstal /w e:where e: is the drive containing your previous system files that weresaved.If Windows 95 is running and you want to remove the uninstall files to free up disk space (6 to 9MB), follow these steps:1. Click the Start button, point to Settings, and then click Control    Panel.2. Double-click Add/Remove Programs.3. On the Install/Uninstall tab, click Old Windows 3.x/MS-DOS System    Files, and then click Remove.You will no longer be able to uninstall Windows 95.IF YOU HAVE A COMPRESSED DRIVE==============================If you have used compression software to compress your hard disk, youmay get a message saying that there is not enough space on the hostpartition of the compressed drive. Setup may have to copy some filesto your startup drive, the host for your startup drive, or the hostfor your Windows drive. If you get this message, you should free upsome space on the specified drive, and then run Setup again. Try oneof the following:- If you are setting up Windows on a compressed drive, try setting it  up on an uncompressed drive if possible.- Delete any unneeded files on your host partition.- If you are running Windows 3.1 and have a permanent swap file, try  making it smaller. In Control Panel, double-click the 386 Enhanced  icon, and then click Virtual Memory. Then modify the size of your  swap file.- Use your disk compression software to free up some space on the host  drive for the compressed drive. If you compressed your drive by using  DriveSpace or DoubleSpace, follow these steps:  1. Quit Windows.  2. Run Drvspace.exe or Dblspace.exe.  3. Select the compressed drive on whose host you want to free space.  4. On the Drive menu, click Change Size.  If you used other compression software, such as Stacker, consult the  documentation that came with it.NOTE: If you notice a discrepancy in the amount of free space reportedby Setup and the amount of space you think is available on your hostdrive, it may be because Windows uses some space for creating a swapfile. This may not appear to take up any space when Windows is notrunning. NOTE: If you create a startup disk during Setup, make sure you do notuse a compressed disk for the startup disk.If You Have SuperStor Compression---------------------------------If you have compressed your hard disk by using SuperStor, Setup may notbe able to find your startup drive and install Windows 95. If you get amessage about this during Setup, uncompress your disk and remove SuperStor, then run Setup again.If You Have XtraDrive Compression---------------------------------If you have compressed your hard disk by using XtraDrive and you areupgrading a previous version of Windows, Setup will not be able toinstall Windows 95 unless you turn off XtraDrive's write-cache. Toturn this off, carry out the following procedure:1. Quit Windows.2. Run Vmu.exe (XtraDrive's Volume Maintenance Utility).3. Choose Advanced Options, and then press ENTER.4. Set the EMS cache size to 0.5. Set the Conventional cache size to 1 (the minimum).6. Set Allow Write Caching to NO.7. At the confirmation prompt, choose Yes. You will see a message    saying that you must restart your computer for the changes to take    effect.8. Quit Volume Maintenance Utility, and then restart your computer.9. Start Windows, and then run Setup again.INSTALLING WINDOWS 95 OVER WINDOWS NT =====================================If you are multi-booting MS-DOS and Windows NT, boot to MS-DOS, and then run Setup from either MS-DOS or Windows 3.x. You will not be able to install Windows 95 to a directory with a shared Windows 3.x/Windows NTconfiguration; you will need to install Windows 95 to a differentdirectory.If you are not multi-booting MS-DOS and Windows NT, you shouldconfigure your computer to multi-boot MS-DOS and Windows NT first, andthen follow the instructions above.If you boot MS-DOS from a floppy disk and then run Setup, you will nolonger be able to boot Windows NT; however, you can restore Windows NTby booting from the Windows NT boot/repair disk, and then selecting theRepair option).INSTALLING WINDOWS 95 OVER OS/2===============================Setup will not run on OS/2. You need to boot to MS-DOS and run Setup from the MS-DOS prompt.NOTE: If you are upgrading over OS/2 on an HPFS partition, you willneed to have your OS/2 disk 1 available during Setup.If you are using OS/2 Boot Manager to choose operating systems atstartup, Setup will disable Boot Manager to ensure that Windows 95 canrestart the computer and complete its installation. Boot Manager can bereactivated by running the Fdisk utility that comes with Windows 95(see the procedure at the end of this section).If you are not using Boot Manager, configure your computer to use Boot Manager, and then follow the instructions above.If you boot MS-DOS from a floppy disk and then run Setup, you will nolonger be able to boot OS/2 after Windows 95 has been installed. Youwill need to delete the Autoexec.bat and Config.sys files that OS/2uses before running Windows 95 Setup.If you want to remove OS/2 from your computer after you have installedWindows 95, carry out the following procedure:1. Back up the data files you want to keep onto a floppy disk or    network drive.2. Delete the files in each of your OS/2 directories and subdirectories,   and then delete the OS/2 directories.3. In the root directory, the following files are marked as hidden    system files and need to be deleted:	Ea data.sf	OS2ldr.msg	OS2krnl	OS2boot	Wp data.sf   In My Computer or Windows Explorer, make sure hidden files are    visible. To do this, click the View menu, click Options, and then    click Show All Files. Then delete the OS/2 files listed above.   NOTE: If you have a version of OS/2 other than version 2.0, the    names of the OS/2 files on your hard disk may differ from those    listed above. Also, depending on which version of OS/2 you have,    in your root directory, you may see the following files, which you    can delete:	OS2dump	OS2ldr	OS2logo	OS2ver4. Remember to empty the Recycle Bin to permanently remove the files    from your computer.If Boot Manager is installed and you want to remove it, restart your computer, and then carry out the following procedure. (It is recommended that you print this file before restarting your computer.)1. When you see the Boot Manager menu, choose to boot to MS-DOS, and    then run FDisk.2. Choose to make the MS-DOS partition (C) your active partition.3. Quit FDisk, and then restart your computer.If you want to reinstate Boot Manager after you install Windows 95, carry out the following procedure:1. On the Start menu, click Run, and then type FDISK.2. Choose Option 2, Set Active Partition.3. Enter the number of the Boot Manager Partition. This partition will    be the 1 MB non-MS-DOS partition usually placed at the top or bottom.4. Quit FDisk, and then restart your computer as instructed.You can now boot OS/2 at any time and change labels of partitionsin Boot Manager through the OS/2 FDisk program.INSTALLING WINDOWS 95 ON COMPUTERS WITH LANTASTIC=================================================If you are running the LANtastic server, you must disable it beforesetting up Windows 95. To disable the LANtastic server, either removethe Server.exe file from your Autoexec.bat file, or type the followingcommand:	server /removeIf you are running LANtastic and have either mapped or shared yourstartup drive (usually drive C), Setup will not be able to determinewhich drive is your startup drive and will not be able to continue.Before running Setup, you must disable the mapping or stop sharing yourstartup drive.SETUP ERROR MESSAGES====================This section lists specific messages that you may encounter during Setupand provides information about what to do next.SU-0010, SU-0012, SU-0015, SU-0016----------------------------------If you receive one of these messages during Setup, please see the sections about OS/2 and Windows NT earlier in this document.SU-0011-------If your hard disk is password-protected, Setup will not be able to complete successfully. You must first remove the password protection. For more information, see the documentation that came with your computer.SU-0013-------To set up Windows 95, your startup drive must be an MS-DOS boot partition.If your startup drive is an HPFS or Windows NT file system, you must createan MS-DOS boot partition before running Setup. For more information, oncreating an MS-DOS boot partition, see the documentation that came withyour computer.If you have LANtastic networking or SuperStor compression, see thosesections earlier in this document for more information.SU0167------If you have a directory named Desktop in your current Windowsdirectory, Setup will not be able to install Windows 95 into thatdirectory. Windows 95 creates a directory named Desktop and uses itfor system files. If you get this message during Setup, you shouldrename or move your current Desktop directory. Then run Setup again.Standard Mode Messages----------------------If you get any of the following error messages, you should removeany memory managers (such as EMM386.exe, QEMM, or 386Max) from yourConfig.sys file, and then run Setup again.	Standard Mode: Invalid DPMI return.	Standard Mode: Fault in MS-DOS Extender.	Standard Mode: Bad Fault in MS-DOS Extender.	Standard Mode: Unknown stack in fault dispatcher.	Standard Mode: Stack Overflow.NOTE: If you still have problems, try adding EMM386.EXE back into yourConfig.sys file and exclude all ranges. For example,	device=c:\windows\emm386.exe x=A000-FFFFIf you encounter these messages or random hangs during Setup, you may need to turn on double-buffering in SmartDrive. Several SCSI hard drives and some ESDI drives require double-buffering.To turn on double buffering, add the following line to the beginning ofyour Config.sys file:	device=c:\windows\smartdrv.exe /double_buffer+where "c:\windows" is the path to your Windows directory.Cannot Read Setup (.cab) Files------------------------------If you have Multimedia Cloaking and are installing Windows 95 fromfloppy disks, Setup may not run successfully. If you see messages aboutSetup not being able to read .cab files, then you should follow these steps:1. Remove the line referencing Cacheclk.exe from your Config.sys and   Autoexec.bat files.2. Restart your computer.3. Run Setup again.Setup Could Not Back Up Your System Files-----------------------------------------If you see an error message while Setup is saving your system files, there may not be enough disk space, particularly on compressed disks. You should free up space on the drive you are saving your system files on (the default drive is C) by removing unneeded files.Cannot continue on this system configuration--------------------------------------------If you get a message saying "Setup cannot continue on this systemconfiguration," you may have an older, incompatible disk partition.Before running Setup, you will need to back up your data and thenrepartition your disk.GENERAL SETUP NOTES===================This section includes notes on specific system configurations that may prevent Setup from installing Windows 95 successfully.Sager NP8200 or Wedge Technologies 466/DX2------------------------------------------WARNING: If you install Windows 95 on a Sager NP8200 or Wedge Technologies466/DX2 laptop computer, you will not be able to use your computer, even if you reinstall a previous version of Windows.Plug and Play Network Cards and 16-Bit Real-Mode Drivers--------------------------------------------------------When you need to run the 16-bit real-mode driver for your NIC (which iscommon if you use DLC or another real-mode protocol), your Plug and Playcard may appear not to function because the 16-bit NIC drivers load before Windows 95 has a chance to turn on Plug and Play cards. Also, some 16-bit NIC drivers do not recognize Plug and Play cards (most NE2000 Plug andPlay clones fall into this category).To use your Plug and Play card with a 16-bit NIC driver, carry out thefollowing procedure:1. Run the Softset utility that comes with your Plug and Play card,   and set the card to non-Plug and Play mode.2. Double-click the Network icon in Control Panel and then remove the net   card.3. Double-click the Add New Hardware icon in Control Panel and follow the   instructions on your screen. Windows 95 will detect your network card.If you change to a 32-bit protected-mode NIC driver in the future, you can rerun Softset to turn on Plug and Play mode for your card.Intel EtherExpress 16 NICs and PCI Computers--------------------------------------------You may experience system hangs or initialization problems if you areusing an Intel EtherExpress 16 NIC in a PCI computer with some DiamondSpeed Star PCI video cards. The following are excerpts from Intel'sCustomer Support Database. These problems are not related to Windows 95, and happen on a variety of operating system platforms. In general, ifyou experience other problems with your EtherExpress 16 in a PCI computer,please attempt to replace the card before reporting the problem toMicrosoft.If you have one of these video cards, contact your vendor about gettinga new video BIOS update.- Diamond Speed Star PCI video card with BIOS version 1.01- Diamond Viper PCI VGA Video Adapter- Diamond Stealth video card, Bios v1.03IBM Thinkpad Model 750x/755x/360x---------------------------------If you have one of these models, (including submodels such as C, CE, CX, CS, and CSE), check IBM's bulletin board or the THINKPAD forum on CompuServe for an updated BIOS and/or Mwave drivers for your computer before you install Windows 95.If you don't upgrade your BIOS, you might have problems if you move the mouse while your computer is turning suspend mode on or off.MEMORY MANAGERS===============If you have QEMM installed on your computer, we recommend removing it from your Config.sys file before setting up Windows 95. You can add it back after Windows 95 is installed.The following memory managers are incompatible with or may causeproblems with Windows 95. It is recommended that you remove allreferences to them from your Config.sys and Autoexec.bat files and useEmm386.exe and Himem.sys, which are provided with Windows 95, to managememory instead.        Allemm4.sys - All Charge 386 Version 3.1        HPemm386.sys and HPemm486.sys        HPmm.sys - HP Memory Manager (must remove before Setup)        Iemm.sys Memory Manager        Intel(R) Expanded-Memory Emulator (Ilim386.sys)        Maximizer Memory Manager (Maximize.com)        NetRoom Memory Manager (RM386.sys)	QMAPS Memory Manager Version 5.16	UMB PRO Version 1.07NOTE: The documentation for 386MAX recommends against setting the EXTparameter below 64. If you set this parameter to 0, Setup will fail.NOTE: If you remove the line containing Rm386.sys from your Config.sysfile, you may need to install Himem.sys, which comes with Windows orMS-DOS. You can do this by adding the following line to your Config.sysfile:        device=<path>\himem.sys                                       The <path> is the location of your Windows or MS-DOS files (for example,C:\Windows).DISK-CACHE PROGRAMS===================Before you run Setup, it is recommended that you remove any third-party disk-cache programs and replace them with Smartdrv.exe, which is provided with Windows 95.While running Windows 95, you do not need to use a disk-cache utility. Setup will remove most disk-cache programs for you.If you are running one of the following disk-cache utilities, youshould remove it. In some cases, Setup will remove it for you.  386MAX Disk-Cache Utility (Qcache.exe) (do not use with SmartDrive)  Cache.exe Disk-Cache Utility  Cache.sys Disk-Cache Utility  Flash Disk-Cache Utility (Flash.exe) (do not use with SmartDrive)  Hyperdisk Disk-Cache Utility (do not use with SmartDrive)  Icache.sys Disk-Cache Utility   IBMcache.sys Disk-Cache Utility   Mace Disk-Cache Utility (Mcache.sys)  Norton Speed Drive Disk Utility (SPEEDRV)  Norton Utilities Version 5.0 and 6.1 (DISKREET, NCACHE)  PC-Cache (PC Tools disk cache program) (must remove before Setup)  PC-Kwik Disk-Cache Utility (Pc-kwik.exe)  PC_Kwik Disk Accelerator  PC-Kwik Version 1.59 (Pck.exe, Pskscrn.exe, Pckey.com)  PC Tools(TM) Disk-Cache Utility (Pc-cache.com)  Secretdisk II Disk-Cache Utility (Fast512.sys) (do not use with SmartDrive)  Super PC-Kwik Disk-Cache Utility (Superpck.exe)ANTI-VIRUS SOFTWARE===================Some anti-virus programs can cause problems when you run Setup. Makesure that no anti-virus programs are running while you are setting upWindows 95. If the program is a terminate-and-stay-resident program,remove any references to it in your Autoexec.bat, Config.sys, and Win.inifiles.If your BIOS has built-in virus protection, you should disable it beforerunning Setup. To disable it, you must use the CMOS setup program foryour BIOS. For more information, see the documentation that came withyour computer.See the notes for specific anti-virus programs below.Central Point Anti-Virus Version 1.1 (Vsafe.com/Vsafe.sys)----------------------------------------------------------To remove VSAFE, remove any lines containing Vsafe.com or Vsafe.sysfrom your Autoexec.bat file. Also, remove any references to Vsafe.comor Vsafe.sys from the RUN= line in your Win.ini file.If you are upgrading to Windows 95, you must also delete all theChklist.ms files that VSAFE has created before you run Setup. BecauseWindows uses the disk for memory swapping, you should turn off theVsafe write-protection option when you run Windows 95.If you don't remove VSAFE before you set up Windows, you will seewarnings about Command.com, Win.com, and Krnl.386 when Windows starts.If you see these warnings, ignore them and choose the update option.For more information, see the Central Point Anti-Virus documentation.F-PROT Professional-------------------Setup cannot run if F-PROT Professional is running. Remove this programfrom your Autoexec.bat and Config.sys files, and then check your Win.inifile for the following line:	load=wvirstop.exeIf you see this line, remove it. When you have finished, restart yourcomputer, and then run Setup again.Norton Anti-Virus(R) ---------------------If you are running any version of Norton Anti-Virus, you should remove it before running Setup. After setup, it is recommended that you do not runNorton Anti-Virus version 1.x, 2.x, or 3.x with Windows 95. You shouldobtain Norton Anti-Virus for Windows 95.To remove Norton Anti-Virus version 1.5:1. In your Config.sys file, remove the following line:	device=c:\nav\nav_.sys2. In your Autoexec.bat file, remove C:\Nav from the PATH statement.To remove the anti-virus features of Norton Desktop for Windowsversion 3.0:1. In your Config.sys file, remove the following line:	device=c:\ndw\navtsr.exe2. In your Autoexec.bat file, remove the following lines:	c:\ndw\image.exe	c:\ndw from the PATH statement3. In your System.ini file, remove the following lines:	shell=c:\ndw\ndw.exe (in the [boot] section)	device=symevent (in the [386enh] section)4. In your Win.ini file, remove the following line:	load=c:\ndw\navtsrw.exeUSING TERMINATE-AND-STAY-RESIDENT (TSR) PROGRAMS AND DRIVERS============================================================APPEND (MS-DOS)---------------Do not use the APPEND utility with Windows 95. It prevents Windowsand Windows-based programs from creating valid Well-Formed-Path (WFP)names for the files they are using. (A WFP is the complete name of afile, including the drive letter and full path specification, startingfrom the root directory.)Autocon Version 2.0e, Bootcon Version 1.60, and Boot.sys--------------------------------------------------------These programs enable you to select from different configurations whenyou start your computer. Windows 95 Setup modifies only the firstsection in your Config.sys and Autoexec.bat files, so you may have tomodify these files manually after Setup if you want to use theseprograms. For more information, see the documentation that came withyour program.Cubit Version 3.01------------------When you are using Cubit with Windows 95, do not compress the WindowsSystem directory or any file that is loaded from your Config.sys file.Before you upgrade to Windows 95, make sure that the earlier version ofWindows is uncompressed on your hard disk. You may recompress the filesafter you have successfully set up Windows 95.Doubledisk Version 2.5----------------------Windows 95 may try to access "phantom" disk drives if you use it withDoubledisk. Phantom drives occur when you use Doubledisk to create acompressed drive. For example, if you have drives A, B, and C on yourcomputer and you use Doubledisk to create drive F, Windows 95 andMS-DOS recognize drives D and E as valid drives, even though they donot actually exist. You can use the DRVOFF utility to prevent Windowsfrom recognizing phantom drives. To order a copy ofthe DRVOFF utility, contact Vertisoft.Infinite Disk Version 2.1-------------------------Infinite Disk version 2.1 does not work properly with Windows 95.Either remove Infinite Disk software from your computer before you runSetup, or contact your software dealer for a version of Infinite Disksoftware that is compatible with Windows 95.To remove Infinite Disk from your computer:1. Restore any compressed files back to their original state.2. Remove the following lines from your Config.sys and Autoexec.bat    files:	iddrv.sys	idres.exe	protect /c3. Restart your computer, and then run Setup again. NetWare(R) NetBIOS------------------The NetWare NetBIOS TSR is incompatible with Windows 95 in manyconfigurations. In most cases, Setup will detect NetWare NetBIOS andremove the startup command from your computer. However, if you haveNetWare NetBIOS set up to start from a location other than yourAutoexec.bat file (for example, from a batch file), Setup cannotdetect it. In this case, you need to remove NetWare NetBIOS manually.Windows 95 includes an IPX/SPX-compatible protocol that you can useinstead of NetBIOS. For information about configuring Windows 95 towork with it, see NETWORKS.TXT.Newspace Version 1.07---------------------This disk-compression utility is incompatible with Windows 95.Norton Desktop for Windows (Ep.exe)-----------------------------------If the data-recovery program Erase Protect (Ep.exe) is loaded fromyour Autoexec.bat file, you need to disable it when you are setting upWindows, especially if you are upgrading over a previous version ofWindows. Erase Protect tries to save copies of all deleted files, whichcan cause you to run out of disk space while running Setup.It is recommended that you run Erase Protect with a permanent swap file. If you are using a temporary swap file, you need to exclude files thathave a .tmp or .swp extension from erase protection.Norton Disklock Versions 3.01 and 3.5-------------------------------------Norton Disklock versions 3.01 and 3.5 do not work properly withWindows 95. Either remove this software from your computer before yourun Setup, or contact Symantec product support for a version ofDisklock that is compatible with Windows 95.For information about how to remove Disklock from your computer, seethe documentation that came with Norton Disklock.PC Tools Deluxe(TM) Version 7.1 (DATAMON)-----------------------------------------If you load PC Tools DATAMON using the \SENTRY+ option, Setup may failif you are low on disk space. Do not use the \SENTRY+ option when loadingDATAMON.Do not load DATAMON after loading SmartDrive. If DATAMON is loaded afterSmartDrive, your computer may fail. See the PC Tools documentation forinformation about how to unload DATAMON.PC Tools Deluxe Version 6.0 (DESKTOP)-------------------------------------If you try to start PC Tools from an MS-DOS Prompt within Windows,your computer may fail or restart itself. These problems also occur ifyou use MS-DOS commands from an MS-DOS Prompt within Windows.Version 7.0 of PC Tools may correct these problems. However, do not loadDESKTOP from an MS-DOS Prompt if it was loaded before starting Windows. If you do, your computer may fail when you quit Windows. It is recommendedthat you run DESKTOP from its PIF, provided with Windows 95.SUBST (MS-DOS)--------------You may encounter problems with SUBST during Setup, but you can safelyadd it back after Windows 95 has been installed.UNDELETE--------If you are running UNDELETE with the SENTRY option, Setup may haveproblems, and there may be cases when you run out of disk space duringSetup. It is recommended that you remove UNDELETE from your Config.sysand Autoexec.bat files before running Setup.NOTE: The SENTRY option creates a hidden directory named Sentry. Whenyou delete a file, UNDELETE moves the file from its current location to the Sentry directory. Before removing UNDELETE from your Config.sys orAutoexec.bat file, you should free up disk space by using theUNDELETE /PURGE command on all drives.)If you do not remove it, Setup will disable this command for you.KNOWN POTENTIAL SETUP PROBLEMS==============================Installing Windows 95 on a 4 MB or 386 computer from floppy disks maybe very slow. To speed things up:- Run Setup from inside Windows 3.x or Windows for Workgroups. Avoid  running Setup from MS-DOS.- If you are running a disk-compression program, such as DriveSpace or  DoubleSpace, Setup may be very slow. Consider copying the files on   the floppy disks to a temporary directory on your hard disk, and then  running Setup from your hard disk. To copy files from Disks 2 through  12, you will need to use the EXTRACT command on Disk 1 to copy the   Win95_xx.cab files to your hard disk, since they are in the new  Microsoft Distribution Media Format (DMF). Normal MS-DOS commands like   COPY and XCOPY won't work on these floppy disks.    To copy a .cab file from a floppy disk to your hard disk, use the  following command:	extract /c a:win95_xx.cab c:\<TempDir>  where <TempDir> is the location of a temporary directory on your  hard disk.- During Setup, if you notice that the light for an empty floppy disk   drive is flashing for a long time and Setup is slow, try inserting a   formatted floppy disk into the empty drive.- If you encounter problems during Setup, such as Setup closing   unexpectedly or error messages that do not apply, try increasing the   size of your permanent swap file. In general, the size of your   permanent swap file plus the amount of RAM in your computer should   equal at least 14 MB for Setup to complete successfully. After you   change your swap file size, try running Setup again.  NOTE: If your hard disk is compressed, you may have to increase the   size of your host drive before you can increase the size of your  swap file.				

Avertissement : Cet article a été traduit automatiquement.

Propriétés

ID d'article : 305710 - Dernière mise à jour : 12/06/2015 04:46:18 - Révision : 1.2

Microsoft Windows 95

  • kbnosurvey kbarchive kbfile kbinfo kbsetup KB305710 KbMtfr kbmt
Commentaires