INFO: Kode kesalahan dalam Windows NT bagian 1 dari 2 (Pasal I)
PENTING: Artikel ini diterjemahkan menggunakan perangkat lunak mesin penerjemah Microsoft dan bukan oleh seorang penerjemah. Microsoft menawarkan artikel yang diterjemahkan oleh seorang penerjemah maupun artikel yang diterjemahkan menggunakan mesin sehingga Anda akan memiliki akses ke seluruh artikel baru yang diterbitkan di Pangkalan Pengetahuan (Knowledge Base) dalam bahasa yang Anda gunakan. Namun, artikel yang diterjemahkan menggunakan mesin tidak selalu sempurna. Artikel tersebut mungkin memiliki kesalahan kosa kata, sintaksis, atau tata bahasa, hampir sama seperti orang asing yang berbicara dalam bahasa Anda. Microsoft tidak bertanggung jawab terhadap akurasi, kesalahan atau kerusakan yang disebabkan karena kesalahan penerjemahan konten atau penggunaannya oleh para pelanggan. Microsoft juga sering memperbarui perangkat lunak mesin penerjemah.
Klik disini untuk melihat versi Inggris dari artikel ini:155011
Artikel ini berisi kode kesalahan yang Anda mungkin menemukan dalam Windows NT. Untuksisa kode kesalahan, lihat article(s) berikut di MicrosoftBasis Pengetahuan:
155012Kode kesalahan dalam Windows NT bagian 2 dari 2
INFORMASI LEBIH LANJUT
Code Name Description---------------------------------------------------------------------------8 LZERROR_UNKNOWNALG Compression algorithm not recognized.-7 LZERROR_BADVALUE Input parameter out of acceptable range.-6 LZERROR_GLOBLOCK Bad global handle.-5 LZERROR_GLOBALLOC Insufficient memory for LZFile structure.-4 LZERROR_WRITE Out of space for output file.-3 LZERROR_READ Corrupt compressed file format.-2 LZERROR_BADOUTHANDLE Invalid output handle.-1 LZERROR_BADINHANDLE Invalid input handle.0L NO_ERROR No error.0L ERROR_SUCCESS The operation was successfully completed.1L ERROR_INVALID_FUNCTION The function is incorrect.2L ERROR_FILE_NOT_FOUND The system cannot find the file specified.3L ERROR_PATH_NOT_FOUND The system cannot find the specified path.4L ERROR_TOO_MANY_OPEN_FILES The system cannot open the file.5L ERROR_ACCESS_DENIED Access is denied.6L ERROR_INVALID_HANDLE The internal file identifier is incorrect.7L ERROR_ARENA_TRASHED The storage control blocks were destroyed.8L ERROR_NOT_ENOUGH_MEMORY Not enough storage is available to process this command.9L ERROR_INVALID_BLOCK The storage control block address is invalid.10L ERROR_BAD_ENVIRONMENT The environment is incorrect.11L ERROR_BAD_FORMAT An attempt was made to load a program with an incorrect format.12L ERROR_INVALID_ACCESS The access code is invalid.13L ERROR_INVALID_DATA The data is invalid.14L ERROR_OUTOFMEMORY Not enough storage is available to complete this operation.15L ERROR_INVALID_DRIVE The system cannot find the specified drive.16L ERROR_CURRENT_DIRECTORY The directory cannot be removed.17L ERROR_NOT_SAME_DEVICE The system cannot move the file to a different disk drive.18L ERROR_NO_MORE_FILES There are no more files.19L ERROR_WRITE_PROTECT The media is write protected.20L ERROR_BAD_UNIT The system cannot find the specified device.21L ERROR_NOT_READY The drive is not ready.22L ERROR_BAD_COMMAND The device does not recognize the command.23L ERROR_CRC Data error (cyclic redundancy check).24L ERROR_BAD_LENGTH The program issued a command but the command length is incorrect.25L ERROR_SEEK The drive cannot locate a specific area or track on the disk.26L ERROR_NOT_DOS_DISK The specified disk cannot be accessed.27L ERROR_SECTOR_NOT_FOUND The drive cannot find the requested sector.28L ERROR_OUT_OF_PAPER The printer is out of paper.29L ERROR_WRITE_FAULT The system cannot write to the specified device.30L ERROR_READ_FAULT The system cannot read from the specified device.31L ERROR_GEN_FAILURE A device attached to the system is not functioning.32L ERROR_SHARING_VIOLATION The process cannot access the file because it is being used by another process.33L ERROR_LOCK_VIOLATION The process cannot access the file because another process has locked a portion of the file.34L ERROR_WRONG_DISK The wrong disk is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.36L ERROR_SHARING_BUFFER_EXCEEDED Too many files opened for sharing.38L ERROR_HANDLE_EOF Reached End Of File.39L ERROR_HANDLE_DISK_FULL The disk is full.50L ERROR_NOT_SUPPORTED The network request is not supported.51L ERROR_REM_NOT_LIST The remote computer is not available.52L ERROR_DUP_NAME A duplicate name exists on the network.53L ERROR_BAD_NETPATH The network path was not found.54L ERROR_NETWORK_BUSY The network is busy.55L ERROR_DEV_NOT_EXIST The specified network resource is no longer available.56L ERROR_TOO_MANY_CMDS The network BIOS command limit has been reached.57L ERROR_ADAP_HDW_ERR A network adapter hardware error occurred.58L ERROR_BAD_NET_RESP The specified server cannot perform the requested operation.59L ERROR_UNEXP_NET_ERR An unexpected network error occurred.60L ERROR_BAD_REM_ADAP The remote adapter is not compatible.61L ERROR_PRINTQ_FULL The printer queue is full.62L ERROR_NO_SPOOL_SPACE Space to store the file waiting to be printed is not available on the server.63L ERROR_PRINT_CANCELLED File waiting to be printed was deleted.64L ERROR_NETNAME_DELETED The specified network name is no longer available.65L ERROR_NETWORK_ACCESS_DENIED Network access is denied.66L ERROR_BAD_DEV_TYPE The network resource type is incorrect.67L ERROR_BAD_NET_NAME The network name cannot be found.68L ERROR_TOO_MANY_NAMES The name limit for the local computer network adapter card exceeded.69L ERROR_TOO_MANY_SESS The network BIOS session limit exceeded.70L ERROR_SHARING_PAUSED The remote server is paused or is in the process of being started.71L ERROR_REQ_NOT_ACCEP The network request was not accepted.72L ERROR_REDIR_PAUSED The specified printer or disk device has been paused.80L ERROR_FILE_EXISTS The file exists.82L ERROR_CANNOT_MAKE The directory or file cannot be created.83L ERROR_FAIL_I24 Fail on INT 24.84L ERROR_OUT_OF_STRUCTURES Storage to process this request is not available.85L ERROR_ALREADY_ASSIGNED The local device name is already in use.86L ERROR_INVALID_PASSWORD The specified network password is incorrect.87L ERROR_INVALID_PARAMETER The parameter is incorrect.88L ERROR_NET_WRITE_FAULT A write fault occurred on the network.89L ERROR_NO_PROC_SLOTS The system cannot start another process at this time.100L ERROR_TOO_MANY_SEMAPHORES Cannot create another system semaphore.101L ERROR_EXCL_SEM_ALREADY_OWNED The exclusive semaphore is owned by another process.102L ERROR_SEM_IS_SET The semaphore is set and cannot be closed.103L ERROR_TOO_MANY_SEM_REQUESTS The semaphore cannot be set again.104L ERROR_INVALID_AT_INTERRUPT_TIME Cannot request exclusive semaphores at interrupt time.105L ERROR_SEM_OWNER_DIED The previous ownership of this semaphore has ended.106L ERROR_SEM_USER_LIMIT Insert the disk for drive 1.107L ERROR_DISK_CHANGE Program stopped because alternate disk was not inserted.108L ERROR_DRIVE_LOCKED The disk is in use or locked by another process.109L ERROR_BROKEN_PIPE The pipe was ended.110L ERROR_OPEN_FAILED The system cannot open the specified device or file.111L ERROR_BUFFER_OVERFLOW The file name is too long.112L ERROR_DISK_FULL There is not enough space on the disk.113L ERROR_NO_MORE_SEARCH_HANDLES No more internal file identifiers available.114L ERROR_INVALID_TARGET_HANDLE The target internal file identifier is incorrect.117L ERROR_INVALID_CATEGORY The IOCTL call made by the application program is incorrect.118L ERROR_INVALID_VERIFY_SWITCH The verify-on-write switch parameter value is incorrect.119L ERROR_BAD_DRIVER_LEVEL The system does not support the requested command.120L ERROR_CALL_NOT_IMPLEMENTED The Application Program Interface (API) entered will only work in Windows/NT mode.121L ERROR_SEM_TIMEOUT The semaphore timeout period has expired.122L ERROR_INSUFFICIENT_BUFFER The data area passed to a system call is too small.123L ERROR_INVALID_NAME The file name, directory name, or volume label is syntactically incorrect.124L ERROR_INVALID_LEVEL The system call level is incorrect.125L ERROR_NO_VOLUME_LABEL The disk has no volume label.126L ERROR_MOD_NOT_FOUND The specified module cannot be found.127L ERROR_PROC_NOT_FOUND The specified procedure could not be found.128L ERROR_WAIT_NO_CHILDREN There are no child processes to wait for.129L ERROR_CHILD_NOT_COMPLETE The %1 application cannot be run in Windows mode.130L ERROR_DIRECT_ACCESS_HANDLE Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.131L ERROR_NEGATIVE_SEEK An attempt was made to move the file pointer before the beginning of the file.132L ERROR_SEEK_ON_DEVICE The file pointer cannot be set on the specified device or file.133L ERROR_IS_JOIN_TARGET A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.134L ERROR_IS_JOINED An attempt was made to use a JOIN or SUBST command on a drive that is already joined.135L ERROR_IS_SUBSTED An attempt was made to use a JOIN or SUBST command on a drive already substituted.136L ERROR_NOT_JOINED The system attempted to delete the JOIN of a drive not previously joined.137L ERROR_NOT_SUBSTED The system attempted to delete the substitution of a drive not previously substituted.138L ERROR_JOIN_TO_JOIN The system tried to join a drive to a directory on a joined drive.139L ERROR_SUBST_TO_SUBST The system attempted to substitute a drive to a directory on a substituted drive.140L ERROR_JOIN_TO_SUBST The system tried to join a drive to a directory on a substituted drive.141L ERROR_SUBST_TO_JOIN The system attempted to SUBST a drive to a directory on a joined drive.142L ERROR_BUSY_DRIVE The system cannot perform a JOIN or SUBST at this time.143L ERROR_SAME_DRIVE The system cannot join or substitute a drive to or for a directory on the same drive.144L ERROR_DIR_NOT_ROOT The directory is not a subdirectory of the root directory.145L ERROR_DIR_NOT_EMPTY The directory is not empty.146L ERROR_IS_SUBST_PATH The path specified is being used in a substitute.147L ERROR_IS_JOIN_PATH Not enough resources are available to process this command.148L ERROR_PATH_BUSY The specified path cannot be used at this time.149L ERROR_IS_SUBST_TARGET An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.150L ERROR_SYSTEM_TRACE System trace information not specified in your CONFIG.SYS file, or tracing is not allowed.151L ERROR_INVALID_EVENT_COUNT The number of specified semaphore events is incorrect.152L ERROR_TOO_MANY_MUXWAITERS Too many semaphores are already set.153L ERROR_INVALID_LIST_FORMAT The list is not correct.154L ERROR_LABEL_TOO_LONG The volume label entered exceeds the 11 character limit. The first 11 characters were written to disk. Any characters that exceeded the 11 character limit were automatically deleted.155L ERROR_TOO_MANY_TCBS Cannot create another thread.156L ERROR_SIGNAL_REFUSED The recipient process has refused the signal.157L ERROR_DISCARDED The segment is already discarded and cannot be locked.158L ERROR_NOT_LOCKED The segment is already unlocked.159L ERROR_BAD_THREADID_ADDR The address for the thread ID is incorrect.160L ERROR_BAD_ARGUMENTS The argument string passed to DosExecPgm is incorrect.161L ERROR_BAD_PATHNAME The specified path name is invalid.162L ERROR_SIGNAL_PENDING A signal is already pending.164L ERROR_MAX_THRDS_REACHED No more threads can be created in the system.167L ERROR_LOCK_FAILED Attempt to lock a region of a file failed.170L ERROR_BUSY The requested resource is in use.173L ERROR_CANCEL_VIOLATION A lock request was not outstanding for the supplied cancel region.174L ERROR_ATOMIC_LOCKS_NOT_SUPPORTED The file system does not support atomic changing of the lock type.180L ERROR_INVALID_SEGMENT_NUMBER The system detected a segment number that is incorrect.182L ERROR_INVALID_ORDINAL The operating system cannot run %1.183L ERROR_ALREADY_EXISTS Attempt to create file that already exists.186L ERROR_INVALID_FLAG_NUMBER The flag passed is incorrect.187L ERROR_SEM_NOT_FOUND The specified system semaphore name was not found.188L ERROR_INVALID_STARTING_CODESEG The operating system cannot run %1.189L ERROR_INVALID_STACKSEG The operating system cannot run %1.190L ERROR_INVALID_MODULETYPE The operating system cannot run %1.191L ERROR_INVALID_EXE_SIGNATURE %1 cannot be run in Windows/NT mode.192L ERROR_EXE_MARKED_INVALID The operating system cannot run %1.193L ERROR_BAD_EXE_FORMAT %1 is not a valid Windows- based application.194L ERROR_ITERATED_DATA_EXCEEDS_64k The operating system cannot run %1.195L ERROR_INVALID_MINALLOCSIZE The operating system cannot run %1.196L ERROR_DYNLINK_FROM_INVALID_RING The operating system cannot run this application program.197L ERROR_IOPL_NOT_ENABLED The operating system is not presently configured to run this application.198L ERROR_INVALID_SEGDPL The operating system cannot run %1.199L ERROR_AUTODATASEG_EXCEEDS_64k The operating system cannot run this application program.200L ERROR_RING2SEG_MUST_BE_MOVABLE The code segment cannot be greater than or equal to 64KB.201L ERROR_RELOC_CHAIN_XEEDS_SEGLIM The operating system cannot run %1.202L ERROR_INFLOOP_IN_RELOC_CHAIN The operating system cannot run %1.203L ERROR_ENVVAR_NOT_FOUND The system could not find the environment option entered.205L ERROR_NO_SIGNAL_SENT No process in the command subtree has a signal handler.206L ERROR_FILENAME_EXCED_RANGE The file name or extension is too long.207L ERROR_RING2_STACK_IN_USE The ring 2 stack is in use.208L ERROR_META_EXPANSION_TOO_LONG The global filename characters * or ? are entered incorrectly, or too many global filename characters are specified.209L ERROR_INVALID_SIGNAL_NUMBER The signal being posted is incorrect.210L ERROR_THREAD_1_INACTIVE The signal handler cannot be set.212L ERROR_LOCKED The segment is locked and cannot be reallocated.214L ERROR_TOO_MANY_MODULES Too many dynamic link modules are attached to this program or dynamic link module.215L ERROR_NESTING_NOT_ALLOWED Can't nest calls to LoadModule.230L ERROR_BAD_PIPE The pipe state is invalid.231L ERROR_PIPE_BUSY All pipe instances busy.232L ERROR_NO_DATA Pipe close in progress.233L ERROR_PIPE_NOT_CONNECTED No process on other end of pipe.234L ERROR_MORE_DATA More data is available.240L ERROR_VC_DISCONNECTED The session was canceled.254L ERROR_INVALID_EA_NAME The specified EA name is invalid.255L ERROR_EA_LIST_INCONSISTENT The EAs are inconsistent.259L ERROR_NO_MORE_ITEMS No more data is available.266L ERROR_CANNOT_COPY The Copy API cannot be used.267L ERROR_DIRECTORY The directory name is invalid.275L ERROR_EAS_DIDNT_FIT The EAs did not fit in the buffer.276L ERROR_EA_FILE_CORRUPT The EA file on the mounted file system is damaged.277L ERROR_EA_TABLE_FULL The EA table in the EA file on the mounted file system is full.278L ERROR_INVALID_EA_HANDLE The specified EA handle is invalid.282L ERROR_EAS_NOT_SUPPORTED The mounted file system does not support extended attributes.288L ERROR_NOT_OWNER Attempt to release mutex not owned by caller.298L ERROR_TOO_MANY_POSTS Too many posts made to a semaphore.299L ERROR_PARTIAL_COPY Only part of a Read/WriteProcessMemory request was completed.317L ERROR_MR_MID_NOT_FOUND The system cannot find message for message number 0x%1 in message file for %2.487L ERROR_INVALID_ADDRESS Attempt to access invalid address.534L ERROR_ARITHMETIC_OVERFLOW Arithmetic result exceeded 32- bits.535L ERROR_PIPE_CONNECTED There is a process on other end of the pipe.536L ERROR_PIPE_LISTENING Waiting for a process to open the other end of the pipe.994L ERROR_EA_ACCESS_DENIED Access to the EA is denied.995L ERROR_OPERATION_ABORTED The I/O operation was aborted due to either thread exit or application request.996L ERROR_IO_INCOMPLETE Overlapped IO event not in signaled state.997L ERROR_IO_PENDING Overlapped IO operation in progress.998L ERROR_NOACCESS Invalid access to memory location.999L ERROR_SWAPERROR Error accessing paging file.1001L ERROR_STACK_OVERFLOW Recursion too deep, stack overflowed.1002L ERROR_INVALID_MESSAGE Window can't handle sent message.1003L ERROR_CAN_NOT_COMPLETE Cannot complete function for some reason.1004L ERROR_INVALID_FLAGS The flags are invalid.1005L ERROR_UNRECOGNIZED_VOLUME The volume does not contain a recognized file system. Make sure that all required file system drivers are loaded and the volume is not damaged.1006L ERROR_FILE_INVALID The volume for a file was externally altered and the opened file is no longer valid.1007L ERROR_FULLSCREEN_MODE The requested operation cannot be performed in full-screen mode.1008L ERROR_NO_TOKEN An attempt was made to reference a token that does not exist.1009L ERROR_BADDB The configuration registry database is damaged.1010L ERROR_BADKEY The configuration registry key is invalid.1011L ERROR_CANTOPEN The configuration registry key cannot be opened.1012L ERROR_CANTREAD The configuration registry key cannot be read.1013L ERROR_CANTWRITE The configuration registry key cannot be written.1014L ERROR_REGISTRY_RECOVERED One of the files containing the system's registry data had to be recovered by use of a log or alternate copy. The recovery succeeded.1015L ERROR_REGISTRY_CORRUPT The registry is damaged. The structure of one of the files that contains registry data is damaged, or the system's in memory image of the file is damaged, or the file could not be recovered because its alternate copy or log was absent or damaged.1016L ERROR_REGISTRY_IO_FAILED The registry initiated an I/O operation that had an unrecoverable failure. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.1017L ERROR_NOT_REGISTRY_FILE The system attempted to load or restore a file into the registry, and the specified file is not in the format of a registry file.1018L ERROR_KEY_DELETED Illegal operation attempted on a registry key that has been marked for deletion.1019L ERROR_NO_LOG_SPACE System could not allocate required space in a registry log.1020L ERROR_KEY_HAS_CHILDREN An attempt was made to create a symbolic link in a registry key that already has subkeys or values.1021L ERROR_CHILD_MUST_BE_VOLATILE An attempt was made to create a stable subkey under a volatile parent key.1022L ERROR_NOTIFY_ENUM_DIR This indicates that a notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.1051L ERROR_DEPENDENT_SERVICES_RUNNING A stop control has been sent to a service which other running services are dependent on.1052L ERROR_INVALID_SERVICE_CONTROL The requested control is not valid for this service.1053L ERROR_SERVICE_REQUEST_TIMEOUT The service did not respond to the start or control request in a timely fashion.1054L ERROR_SERVICE_NO_THREAD A thread could not be created for the service.1055L ERROR_SERVICE_DATABASE_LOCKED The service database is locked.1056L ERROR_SERVICE_ALREADY_RUNNING An instance of the service is already running.1057L ERROR_INVALID_SERVICE_ACCOUNT The account name is invalid or does not exist.1058L ERROR_SERVICE_DISABLED The specified service is disabled and cannot be started.1059L ERROR_CIRCULAR_DEPENDENCY Circular service dependency was specified.1060L ERROR_SERVICE_DOES_NOT_EXIST The specified service does not exist as an installed service.1061L ERROR_SERVICE_CANNOT_ACCEPT_CTRL The service cannot accept control messages at this time.1062L ERROR_SERVICE_NOT_ACTIVE The service has not been started.1063L ERROR_FAILED_SERVICE_CONTROLLER_CONNECT The service process could not connect to the service controller.1064L ERROR_EXCEPTION_IN_SERVICE An exception occurred in the service when handling the control request.1065L ERROR_DATABASE_DOES_NOT_EXIST The database specified does not exist.1066L ERROR_SERVICE_SPECIFIC_ERROR The service has returned a service-specific error code.1067L ERROR_PROCESS_ABORTED The process terminated unexpectedly.1068L ERROR_SERVICE_DEPENDENCY_FAIL The dependency service or group failed to start.1069L ERROR_SERVICE_LOGON_FAILED The service did not start due to a logon failure.1070L ERROR_SERVICE_START_HANG After starting, the service hung in a start-pending state.1071L ERROR_INVALID_SERVICE_LOCK The specified service database lock is invalid.1072L ERROR_SERVICE_MARKED_FOR_DELETE The specified service has been marked for deletion.1073L ERROR_SERVICE_EXISTS The specified service already exists.1074L ERROR_ALREADY_RUNNING_LKG The system is currently running with the last-known- good configuration.1075L ERROR_SERVICE_DEPENDENCY_DELETED The dependency service does not exist or has been marked for deletion.1076L ERROR_BOOT_ALREADY_ACCEPTED The current boot has already been accepted for use as the last-known-good control set.1077L ERROR_SERVICE_NEVER_STARTED No attempts to start the service have been made since the last boot.1078L ERROR_DUPLICATE_SERVICE_NAME The name is already in use as either a service name or a service display name.1079L ERROR_DIFFERENT_SERVICE_ACCOUNT The account specified for this service is different from the account specified for other services running in the same process.1100L ERROR_END_OF_MEDIA The physical end of the tape has been reached.1101L ERROR_FILEMARK_DETECTED A tape access reached a filemark.1102L ERROR_BEGINNING_OF_MEDIA The beginning of the tape or partition was encountered.1103L ERROR_SETMARK_DETECTED A tape access reached a setmark.1104L ERROR_NO_DATA_DETECTED During a tape access, the end of the data marker was reached.1105L ERROR_PARTITION_FAILURE Tape could not be partitioned.1106L ERROR_INVALID_BLOCK_LENGTH When accessing a new tape of a multivolume partition, the current block size is incorrect.1107L ERROR_DEVICE_NOT_PARTITIONED Tape partition information could not be found when loading a tape.1108L ERROR_UNABLE_TO_LOCK_MEDIA Attempt to lock the eject media mechanism failed.1109L ERROR_UNABLE_TO_UNLOAD_MEDIA Unload media failed.1110L ERROR_MEDIA_CHANGED Media in drive may have changed.1111L ERROR_BUS_RESET The I/O bus was reset.1112L ERROR_NO_MEDIA_IN_DRIVE Tape query failed because of no media in drive.1113L ERROR_NO_UNICODE_TRANSLATION No mapping for the Unicode character exists in the target multi-byte code page.1114L ERROR_DLL_INIT_FAILED A DLL initialization routine failed.1115L ERROR_SHUTDOWN_IN_PROGRESS A system shutdown is in progress.1116L ERROR_NO_SHUTDOWN_IN_PROGRESS An attempt to abort the shutdown of the system failed because no shutdown was in progress.1117L ERROR_IO_DEVICE The request could not be performed because of an I/O device error.1118L ERROR_SERIAL_NO_DEVICE No serial device was successfully initialized. The serial driver will unload.1119L ERROR_IRQ_BUSY Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.1120L ERROR_MORE_WRITES A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)1121L ERROR_COUNTER_TIMEOUT A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)1122L ERROR_FLOPPY_ID_MARK_NOT_FOUND No ID address mark was found on the floppy disk.1123L ERROR_FLOPPY_WRONG_CYLINDER Mismatch between the floppy disk sector ID field and the floppy disk controller track address.1124L ERROR_FLOPPY_UNKNOWN_ERROR The floppy disk controller reported an error that is not recognized by the floppy disk driver.1125L ERROR_FLOPPY_BAD_REGISTERS The floppy disk controller returned inconsistent results in its registers.1126L ERROR_DISK_RECALIBRATE_FAILED While accessing the hard disk, a recalibrate operation failed, even after retries.1127L ERROR_DISK_OPERATION_FAILED While accessing the hard disk, a disk operation failed even after retries.1128L ERROR_DISK_RESET_FAILED While accessing the hard disk, a disk controller reset was needed, but even that failed.1129L ERROR_EOM_OVERFLOW Physical end of tape encountered.1130L ERROR_NOT_ENOUGH_SERVER_MEMORY Not enough server storage is available to process this command.1131L ERROR_POSSIBLE_DEADLOCK A potential deadlock condition has been detected.1132L ERROR_MAPPED_ALIGNMENT The base address or the file offset specified does not have the proper alignment.1140L ERROR_SET_POWER_STATE_VETOED An attempt to change the system power state was vetoed by another application or driver.1141L ERROR_SET_POWER_STATE_FAILED The system BIOS failed an attempt to change the system power state.1142L ERROR_TOO_MANY_LINKS An attempt was made to create more links on a file than the file system supports.1150L ERROR_OLD_WIN_VERSION The specified program requires a newer version of Windows.1151L ERROR_APP_WRONG_OS The specified program is not a Windows or MS-DOS program.1152L ERROR_SINGLE_INSTANCE_APP Cannot start more than one instance of the specified program.1153L ERROR_RMODE_APP The specified program was written for an older version of Windows.1154L ERROR_INVALID_DLL One of the library files needed to run this application is damaged.1155L ERROR_NO_ASSOCIATION No application is associated with the specified file for this operation.1156L ERROR_DDE_FAIL An error occurred in sending the command to the application.1157L ERROR_DLL_NOT_FOUND One of the library files needed to run this application cannot be found.1200L ERROR_BAD_DEVICE The specified device name is invalid.1201L ERROR_CONNECTION_UNAVAIL The device is not currently connected but is a remembered connection.1202L ERROR_DEVICE_ALREADY_REMEMBERED An attempt was made to remember a device that was previously remembered.1203L ERROR_NO_NET_OR_BAD_PATH No network provider accepted the given network path.1204L ERROR_BAD_PROVIDER The specified network provider name is invalid.1205L ERROR_CANNOT_OPEN_PROFILE Unable to open the network connection profile.1206L ERROR_BAD_PROFILE The network connection profile is damaged.1207L ERROR_NOT_CONTAINER Cannot enumerate a non- container.1208L ERROR_EXTENDED_ERROR An extended error has occurred.1209L ERROR_INVALID_GROUPNAME The format of the specified group name is invalid.1210L ERROR_INVALID_COMPUTERNAME The format of the specified computer name is invalid.1211L ERROR_INVALID_EVENTNAME The format of the specified event name is invalid.1212L ERROR_INVALID_DOMAINNAME The format of the specified domain name is invalid.1213L ERROR_INVALID_SERVICENAME The format of the specified service name is invalid.1214L ERROR_INVALID_NETNAME The format of the specified network name is invalid.1215L ERROR_INVALID_SHARENAME The format of the specified share name is invalid.1216L ERROR_INVALID_PASSWORDNAME The format of the specified password is invalid.1217L ERROR_INVALID_MESSAGENAME The format of the specified message name is invalid.1218L ERROR_INVALID_MESSAGEDEST The format of the specified message destination is invalid.1219L ERROR_SESSION_CREDENTIAL_CONFLICT The credentials supplied conflict with an existing set of credentials.1220L ERROR_REMOTE_SESSION_LIMIT_EXCEEDED An attempt was made to establish a session to a LAN Manager server, but there are already too many sessions established to that server.1221L ERROR_DUP_DOMAINNAME The workgroup or domain name is already in use by another computer on the network.1222L ERROR_NO_NETWORK The network is not present or not started.1223L ERROR_CANCELLED The operation was cancelled by the user.1224L ERROR_USER_MAPPED_FILE The requested operation cannot be performed on a file with a user mapped section open.1225L ERROR_CONNECTION_REFUSED The remote system refused the network connection.1226L ERROR_GRACEFUL_DISCONNECT The network connection was gracefully closed.1227L ERROR_ADDRESS_ALREADY_ASSOCIATED The network transport endpoint already has an address associated with it.1228L ERROR_ADDRESS_NOT_ASSOCIATED An address has not yet been associated with the network endpoint.1229L ERROR_CONNECTION_INVALID An operation was attempted on a non-existent network connection.1230L ERROR_CONNECTION_ACTIVE An invalid operation was attempted on an active network connection.1231L ERROR_NETWORK_UNREACHABLE The remote network is not reachable by the transport.1232L ERROR_HOST_UNREACHABLE The remote system is not reachable by the transport.1233L ERROR_PROTOCOL_UNREACHABLE The remote system does not support the transport protocol.1234L ERROR_PORT_UNREACHABLE No service is operating at the destination network endpoint on the remote system.1235L ERROR_REQUEST_ABORTED The request was aborted.1236L ERROR_CONNECTION_ABORTED The network connection was aborted by the local system.1237L ERROR_RETRY The operation could not be completed. A retry should be performed.1238L ERROR_CONNECTION_COUNT_LIMIT A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.1239L ERROR_LOGIN_TIME_RESTRICTION Attempting to login during an unauthorized time of day for this account.1240L ERROR_LOGIN_WKSTA_RESTRICTION The account is not authorized to login from this station.1241L ERROR_INCORRECT_ADDRESS The network address could not be used for the operation requested.1242L ERROR_ALREADY_REGISTERED The service is already registered.1243L ERROR_SERVICE_NOT_FOUND The specified service does not exist.1244L ERROR_NOT_AUTHENTICATED The operation being requested was not performed because the user has not been authenticated.1245L ERROR_NOT_LOGGED_ON The operation being requested was not performed because the user has not logged on to the network.1246L ERROR_CONTINUE Return that wants caller to continue with work in progress.1247L ERROR_ALREADY_INITIALIZED An attempt was made to perform an initialization operation when initialization has already been completed.1248L ERROR_NO_MORE_DEVICES No more local devices.
prodnt sysdiff.exe tanpa pengawasan setup
Peringatan: Artikel ini telah diterjemahkan secara otomatis
ID Artikel: 155011 - Tinjauan Terakhir: 09/15/2011 10:32:00 - Revisi: 2.0
- kberrmsg kbinfo kbsbk kbmt KB155011 KbMtid